Difference between revisions of "Rigol DS1000Z series"

From sigrok
Jump to navigation Jump to search
Line 2: Line 2:
| image              =  
| image              =  
| name                = Rigol DS1000Z Series
| name                = Rigol DS1000Z Series
| status              =  
| status              = supported
| source_code_dir    =  
| source_code_dir    =  
| channels            = 4
| channels            = 4

Revision as of 19:01, 17 May 2015

Rigol DS1000Z Series
Status supported
Channels 4
Samplerate 1GSa/s (1ch), 500MSa/s (2ch), 250MSa/s (3 or 4 ch)
Analog bandwidth 50-100MHz (depending on model)
Vertical resolution 8bits
Triggers edge, pulse, runt, windows, nth edge, slope, video, pattern, delay, timeout, duration, setup/hold, RS232/UART, I²C, SPI
Input impedance 1MΩ‖13pF 300V RMS CAT I
Memory 12/24Mpts (mode/ch-dependent)
Display 7 Inch WVGA (800x480) 160,000 colours
Connectivity USB host/device, ethernet (LXI), trigger out, pass/fail out
Features math: +, —, x, /, FFT, vertical sensitivity: 1 mV/div to 10 V/div
Website rigolna.com

The Rigol DS1000Z Series are 4-channel oscilloscopes with an analog bandwidth of 50-100MHz and 1GSa/s maximum sampling rate.


Devices

Model Bandwidth
Rigol DS1054Z 50MHz
DS1074Z 70MHz
DS1104Z 100MHz

Protocol

The device uses USBTMC or LXI via its ethernet port for communication with a host PC. The protocol is based on SCPI commands.

Resources