Protocol decoder:pan1321
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Name | Panasonic PAN1321 |
---|---|
Description | Bluetooth RF module with Serial Port Profile (SPP) |
Status | supported |
License | GPLv2+ |
Source code | decoders/pan1321 |
Input | uart |
Output | pan1321 |
Probes | — |
Optional probes | — |
Options | — |
The pan1321 protocol decoder supports the Panasonic PAN1321 Bluetooth module (serial port profile, SPP) protocol.
Hardware
PAN1321
The uart/panasonic_pan1321 directory in sigrok-dumps contains a set of example captures of the communication with a Panasonic PAN1321.
The logic analyzer used was a ChronoVu LA8 (at 500kHz):
Probe setup:
Probe | PAN1321 |
---|---|
0 (green) | TX |
1 (orange) | RX |
Photos:
Protocol
The device can be controlled via a UART connection (RX/TX and also RTS#/CTS# for flow control).
The default baud rate is 115200, but the chip can be reconfigured to other baud rates, too.
The protocol is mostly ASCII-based, using a specific AT command set, publically documented by the vendor.
Commands and responses always end with \r\n.