Protocol decoder:pan1321

From sigrok
Revision as of 19:43, 1 February 2014 by Uwe Hermann (talk | contribs)
Jump to navigation Jump to search
pan1321
Panasonic pan1321 top.jpg
Name Panasonic PAN1321
Description Bluetooth RF module with Serial Port Profile (SPP)
Status supported
License GPLv2+
Source code decoders/pan1321
Input uart
Output pan1321
Probes
Optional probes

The pan1321 protocol decoder supports the Panasonic PAN1321 Bluetooth module (serial port profile, SPP) protocol.

Hardware

PAN1321

The uart/panasonic_pan1321 directory in sigrok-dumps contains a set of example captures of the communication with a Panasonic PAN1321.

The logic analyzer used was a ChronoVu LA8 (at 500kHz):

Probe setup:

Probe PAN1321
0 (green) TX
1 (orange) RX

Photos:

Protocol

The device can be controlled via a UART connection (RX/TX and also RTS#/CTS# for flow control).

The default baud rate is 115200, but the chip can be reconfigured to other baud rates, too.

The protocol is mostly ASCII-based, using a specific AT command set, publically documented by the vendor.

Commands and responses always end with \r\n.

Resources