Difference between revisions of "Pico Technology PicoScope 5203"

From sigrok
Jump to navigation Jump to search
m
m
Line 5: Line 5:
See [[Pico Technology PicoScope 5203/Info]] for more details (such as '''lsusb -vvv''' output) about the device.
See [[Pico Technology PicoScope 5203/Info]] for more details (such as '''lsusb -vvv''' output) about the device.


== Components ==
== Hardware ==
* 2 x Micron D9JLR DDR2 SDRAM 512M (32Mx16)
 
* 2x Micron D9JLR DDR2 SDRAM 512M (32Mx16)
* Xilinx Spartan XC3S400
* Xilinx Spartan XC3S400
* microchip LC24641 EEPROM for usb id
* Microchip LC24641 EEPROM for usb id
* Cypress CY7C68013A-56PVXC (FX2) USB interface
* Cypress CY7C68013A-56PVXC (FX2LP) USB interface
* Texas Instruments ADC08D500 High Performance, Low Power, Dual 8-Bit, 500 MSPS A/D Converter
* Texas Instruments ADC08D500 High Performance, Low Power, Dual 8-Bit, 500 MSPS A/D Converter
* Analog Devices AD9742 12-Bit, 210 MSPS TxDAC® D/A Converter
* Analog Devices AD9742 12-Bit, 210 MSPS TxDAC D/A Converter
* Analog Devices ADCMP562 high speed comparator
* Analog Devices ADCMP562 high speed comparator
* 3 x pca9557
* 3x pca9557
* 4 x omron g6h-2-100
* 4x Omron g6h-2-100
* 3 x MEDER electronic SILO5-1A72-71DHR
* 3x MEDER electronic SILO5-1A72-71DHR


== More photos ==
== Photos ==


<gallery>
<gallery>
File:Picoscope 5203 front.jpg|<small>Front</small>
File:Picoscope 5203 front.jpg|<small>Front</small>
File:Picoscope 5203 back.jpg|<small>Back</small>
File:Picoscope 5203 back.jpg|<small>Back</small>
File:Picoscope 5203 pcb front.jpg|<small>PCB front</small>
File:Picoscope 5203 pcb front.jpg|<small>PCB, front</small>
File:Picoscope 5203 pcb back.jpg|<small>PCB back</small>
File:Picoscope 5203 pcb back.jpg|<small>PCB, back</small>
</gallery>
</gallery>


== Protocol ==
== Protocol ==
Line 43: Line 42:


±100 mV to ±20 V in 8 ranges
±100 mV to ±20 V in 8 ranges
== Resources ==
* [http://www.picotech.com/picoscope5200-oscilloscopesoftware.html Vendor software]
* [http://www.picotech.com/softdownloader.html?zeitfaktor=5m0k3m34k1pp3r&os=linux/32bit&soft=libps5000_R1_3_6_6_3.i386&pid=50 Linux drivers]
* [http://www.picotech.com/softdownloader.html?zeitfaktor=5m0k3m34k1pp3r&os=drivers&soft=PS5000sdk&pid=50 SDK]


[[Category:Device]]
[[Category:Device]]
[[Category:Oscilloscope]]
[[Category:Oscilloscope]]
[[Category:Planned]]
[[Category:Planned]]

Revision as of 01:33, 1 January 2013

PicoScope 5203.

The Pico Technology PicoScope 5203 is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 250 MHz. The max. sampling rate (one-shot) is 1 GS/s (one channel mode) or 500 MS/s (two channel mode). The max. sampling rate for repetitive signals is 20 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.

See Pico Technology PicoScope 5203/Info for more details (such as lsusb -vvv output) about the device.

Hardware

  • 2x Micron D9JLR DDR2 SDRAM 512M (32Mx16)
  • Xilinx Spartan XC3S400
  • Microchip LC24641 EEPROM for usb id
  • Cypress CY7C68013A-56PVXC (FX2LP) USB interface
  • Texas Instruments ADC08D500 High Performance, Low Power, Dual 8-Bit, 500 MSPS A/D Converter
  • Analog Devices AD9742 12-Bit, 210 MSPS TxDAC D/A Converter
  • Analog Devices ADCMP562 high speed comparator
  • 3x pca9557
  • 4x Omron g6h-2-100
  • 3x MEDER electronic SILO5-1A72-71DHR

Photos

Protocol

Firmware

Start acquisition

Sample format

End acquisition

Triggers

Voltage ranges

±100 mV to ±20 V in 8 ranges

Resources