Difference between revisions of "Pico Technology PicoScope 2203"

From sigrok
Jump to navigation Jump to search
m
Line 41: Line 41:


=== Voltage ranges ===
=== Voltage ranges ===
[[Category:Device]]
[[Category:Oscilloscope]]

Revision as of 12:31, 8 October 2012

PicoScope 2203.

The Pico Technology PicoScope 2203 is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 5MHz. The max. sampling rate (one-shot) is 40 MS/s (one channel mode) or 20 MS/s (two channel mode). The max. sampling rate for repetitive signals is 1 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.

See Pico Technology PicoScope 2203/Info for more details (such as lsusb -vvv output) about the device.

Components

  • Xilinx Spartan XC3S250E
  • Cypress CY7C68013A-56PVXC
  • Analog Devices AD9288
  • Analog Devices AD8132
  • Meder Electronics SIL05-1A72-71D
  • Maxim MAX889S
  • HC4052

More photos

See also this flickr set for more PCB photos of the device.

Protocol

Firmware

The usual Cypress FX2 firmware upload mechanism is used to upload a special FX2 firmware.

Start acquisition

Sample format

End acquisition

Triggers

Voltage ranges