Difference between revisions of "OpenBSD"

From sigrok
Jump to navigation Jump to search
(OpenBSD instructions)
 
m
Line 87: Line 87:
  $ '''AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh'''
  $ '''AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh'''
  $ '''./configure'''
  $ '''./configure'''
$ '''make'''
$ '''make install'''
=== PulseView ===
'''Note:''' PulseView does not build on OpenBSD at the moment, this is being investigated.
'''Requirements:'''
* git
* g++ (>= 4.0)
* libtool
* pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
* cmake >= 2.6
* libglib >= 2.28.0
* Qt >= 4.5
* libboost >= 1.46 (including the following libs)
** libboost-sytem
** libboost-thread
* libsigrok >= 0.2.0
* libsigrokdecode >= 0.1.
'''Installing the requirements:'''
$ '''pkg_add -r git libtool cmake glib2 qt4 boost-1.42.0p14'''
'''Building:'''
$ '''git clone git://sigrok.org/pulseview'''
$ '''cd pulseview'''
$ '''cmake .'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''
=== sigrok-gtk ===
'''Note:''' The GTK+ GUI is not yet usable!
'''Requirements:'''
* git
* gcc (>= 4.0)
* autoconf >= 2.63
* automake >= 1.11
* libtool
* pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
* libglib >= 2.28.0
* GTK+
* libsigrok >= 0.2.0
'''Installing the requirements:'''
$ '''pkg_add -r git autoconf automake libtool glib2 gtk+2'''
'''Building:'''
$ '''git clone git://sigrok.org/sigrok-gtk'''
$ '''cd sigrok-gtk'''
$ '''AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''make install'''
=== sigrok-qt ===
'''Note:''' The Qt GUI is not yet usable!
'''Requirements:'''
* git
* g++
* libtool
* pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
* libglib >= 2.28.0
* Qt >= 4.5
* libsigrok >= 0.2.0
* libsigrokdecode >= 0.1.0
'''Installing the requirements:'''
$ '''pkg_add -r git libtool glib2 qt4'''
'''Building:'''
$ '''git clone git://sigrok.org/sigrok-qt'''
$ '''cd sigrok-qt'''
$ '''qmake4'''
  $ '''make'''
  $ '''make'''
  $ '''make install'''
  $ '''make install'''

Revision as of 18:38, 19 January 2013

This page describes how to build/install sigrok on OpenBSD.

The instructions were tested on OpenBSD 5.2, older versions may or may not have the required libs/versions to build sigrok.

Distribution packages

There are no OpenBSD packages/ports yet, contributors welcome!

Building

libsigrok

Requirements:

  • git
  • gcc (>= 4.0)
  • autoconf >= 2.63
  • automake >= 1.11
  • libtool
  • pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
  • libglib >= 2.28.0
  • libusb-1.0 (this is an integral part of OpenBSD, not an extra package/library, apparently)
  • libzip >= 0.8
  • libftdi >= 0.16 (for some logic analyzer hardware)

Installing the requirements:

$ pkg_add -r git autoconf automake libtool glib2 libzip libftdi

Building:

$ git clone git://sigrok.org/libsigrok
$ cd libsigrok
$ AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh
$ ./configure
$ make
$ make install

libsigrokdecode

Requirements:

  • git
  • gcc (>= 4.0)
  • autoconf >= 2.63
  • automake >= 1.11
  • libtool
  • pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
  • libglib >= 2.24.0
  • Python >= 3.0

Installing the requirements:

$ pkg_add -r git autoconf automake libtool glib2 python

Building:

$ git clone git://sigrok.org/libsigrokdecode
$ cd libsigrokdecode
$ AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh
$ ./configure
$ make
$ make install

sigrok-cli

Requirements:

  • git
  • gcc (>= 4.0)
  • autoconf >= 2.63
  • automake >= 1.11
  • libtool
  • pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
  • libglib >= 2.28.0
  • libsigrok >= 0.2.0
  • libsigrokdecode >= 0.1.0

Installing the requirements:

$ pkg_add -r git autoconf automake libtool glib2

Building:

$ git clone git://sigrok.org/sigrok-cli
$ cd sigrok-cli
$ AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh
$ ./configure
$ make
$ make install

PulseView

Note: PulseView does not build on OpenBSD at the moment, this is being investigated.

Requirements:

  • git
  • g++ (>= 4.0)
  • libtool
  • pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
  • cmake >= 2.6
  • libglib >= 2.28.0
  • Qt >= 4.5
  • libboost >= 1.46 (including the following libs)
    • libboost-sytem
    • libboost-thread
  • libsigrok >= 0.2.0
  • libsigrokdecode >= 0.1.

Installing the requirements:

$ pkg_add -r git libtool cmake glib2 qt4 boost-1.42.0p14

Building:

$ git clone git://sigrok.org/pulseview
$ cd pulseview
$ cmake .
$ make
$ sudo make install
$ cd ..

sigrok-gtk

Note: The GTK+ GUI is not yet usable!

Requirements:

  • git
  • gcc (>= 4.0)
  • autoconf >= 2.63
  • automake >= 1.11
  • libtool
  • pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
  • libglib >= 2.28.0
  • GTK+
  • libsigrok >= 0.2.0

Installing the requirements:

$ pkg_add -r git autoconf automake libtool glib2 gtk+2

Building:

$ git clone git://sigrok.org/sigrok-gtk
$ cd sigrok-gtk
$ AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh
$ ./configure
$ make
$ make install

sigrok-qt

Note: The Qt GUI is not yet usable!

Requirements:

  • git
  • g++
  • libtool
  • pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
  • libglib >= 2.28.0
  • Qt >= 4.5
  • libsigrok >= 0.2.0
  • libsigrokdecode >= 0.1.0

Installing the requirements:

$ pkg_add -r git libtool glib2 qt4

Building:

$ git clone git://sigrok.org/sigrok-qt
$ cd sigrok-qt
$ qmake4
$ make
$ make install