Noname LHT00SU1
Revision as of 16:36, 10 August 2017 by Uwe Hermann (talk | contribs) (Created page with "{{Infobox logic analyzer | image = 180px | name = Noname LHT00SU1 | status = supported | source_code_d...")
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 + 1 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage |
Digital: 0V — +5.3V Analog: ±10V |
| Threshold voltage | Fixed: VIH=1.4V, VIL=0.8V |
| Memory | none |
| Compression | none |
| Website | aliexpress.com |
The Noname LHT00SU1 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 1 additional analog channel (theoretically 2, but only one of them can be used at a time).
It is a clone of the CWAV USBee AX-Pro.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See Noname LHT00SU1/Info for some more details (such as lsusb -v output) on the device.
Hardware
Photos
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.