Mcupro Logic16 clone

From sigrok
Revision as of 11:52, 25 August 2014 by Uwe Hermann (talk | contribs)
Jump to navigation Jump to search
mcupro Saleae16
Mcupro Logic16 overview.png
Status planned
Source code saleae-logic16
Channels 3/6/9/16
Samplerate 100/50/32/16MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -0.9V — 6V
Threshold voltage 1.5V (operates with 3.3V logic)
Memory none
Compression yes
Website aliexpress.com

The mcupro Saleae16 is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).

This is a clone of the Saleae Logic16.

See Mcupro Saleae16/Info for more details (such as lsusb -v output) about the device.

Hardware

Operation

This logic analyzer works with unmodified Saleae software. The Actel FPGA has on-chip flash storage, so it only requires an upload of Cypress FX2LP firmware in order to operate.

Firmware

The firmware extraction steps are identical to steps for Saleae Logic16, however you only need to have saleae-logic16-fx2.fw installed.

Photos

Protocol

See Saleae_Logic16#Protocol.