Difference between revisions of "Mac OS X"

From sigrok
Jump to navigation Jump to search
(→‎libserialport: Joined information on libserialport from above.)
Line 5: Line 5:
== Building ==
== Building ==


These instructions have been tested on a clean install of Mac OS X 10.6.8 and 10.8.4.
These instructions have been tested on a clean install of Mac OS X 10.6.8, 10.8.4 and 10.9.1.


=== Requirements ===
=== Requirements ===

Revision as of 03:41, 4 January 2014

sigrok-gui on Mac OS X

This page describes how to build the sigrok subprojects on Mac OS X.

Building

These instructions have been tested on a clean install of Mac OS X 10.6.8, 10.8.4 and 10.9.1.

Requirements

Install MacPorts, follow the guide on macports.org (this step will require Xcode and Command Line Tools for Xcode be installed on your machine, which are also a dependencies to build sigrok).

Install Qt, download qt-mac-opensource-4.7.4.dmg from qt.nokia.com (Only needed for PulseView).


Install git (not needed at least with 10.8.4):

$ sudo port install git-core

This will also pull in a bunch of dependencies required by git-core (and some of them also by sigrok).

Install boost, libusb, libzip and libftdi, the libsigrok build dependencies:

$ sudo port install boost libusb libzip libftdi0

Install autoconf, automake, cmake, glib2.0+, python 3.3, libtool and pkgconfig to satisfy version dependencies in the build process.

$ sudo port install autoconf automake cmake glib2 python33 libtool pkgconfig

Set the PKG_CONFIG_PATH environment variable to reflect the future locations of libsigrok and libsigrokdecode for the sigrok-cli build process.

$ export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/

libserialport

libserialport is optional and required only for devices with serial connection, e.g. most multimeters. If not present during configuring libsigrok, the respective drivers in libsigrok will be disabled.

$ git clone git://sigrok.org/libserialport
$ cd libserialport
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

libsigrok

$ git clone git://sigrok.org/libsigrok
$ cd libsigrok
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

libsigrokdecode

$ git clone git://sigrok.org/libsigrokdecode
$ cd libsigrokdecode
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

sigrok-cli

$ git clone git://sigrok.org/sigrok-cli
$ cd sigrok-cli
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install

PulseView

$ git clone git://sigrok.org/pulseview
$ cd pulseview
$ cmake .
$ make
$ sudo make install


Notes

TODO

Resources