MCU123 USBee AX Pro clone

From sigrok
Revision as of 22:52, 22 January 2013 by Uwe Hermann (talk | contribs)
Jump to navigation Jump to search
MCU123 USBee AX Pro clone
Usbee ax clone front.png
Status supported
Source code fx2lafw
Channels 8
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage ?
Memory none
Compression none
Website dx.com

The MCU123 USBee AX Pro clone is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

It is a clone of the CWAV USBee AX-Pro, but it doesn't have analog (only 8-channel digital) sampling capabilities. It's also very similar to the MCU123 Saleae Logic clone minus the different USB vendor/device IDs.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

See MCU123 USBee AX Pro clone/Info for more detailed information on the device.

Hardware

  • Main chip: Cypress CY7C68013A-56PVXC (FX2LP)
  • Input buffer: NXP 74HC245 (markings: "NXP HC245 2A7K508 UnD2 18E")
  • 256-byte I2C EEPROM: Atmel AT24C02 (markings: "ATMEL218 24C02N SU27 D")
  • 3.3V low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3 (markings: "AMS1117 3.3 HT240E")
  • 24MHz crystal: 24.000

Photos

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources