Difference between revisions of "KingST KQS3506-LA16100"

From sigrok
Jump to navigation Jump to search
(EEPROM pinout and connections.)
Line 29: Line 29:
* '''3.3V voltage regulator''': [http://www.advanced-monolithic.com/products/voltreg.html#1117 Advanced Monolithic Systems AMS1117-3.3] ([http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf datasheet], [http://www.advanced-monolithic.com/pdf/ds1117.pdf older datasheet])
* '''3.3V voltage regulator''': [http://www.advanced-monolithic.com/products/voltreg.html#1117 Advanced Monolithic Systems AMS1117-3.3] ([http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf datasheet], [http://www.advanced-monolithic.com/pdf/ds1117.pdf older datasheet])
* '''1.2V voltage regulator''': [http://www.advanced-monolithic.com/products/voltreg.html#1117 Advanced Monolithic Systems AMS1117-1.2] ([http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf datasheet], [http://www.advanced-monolithic.com/pdf/ds1117.pdf older datasheet])
* '''1.2V voltage regulator''': [http://www.advanced-monolithic.com/products/voltreg.html#1117 Advanced Monolithic Systems AMS1117-1.2] ([http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf datasheet], [http://www.advanced-monolithic.com/pdf/ds1117.pdf older datasheet])
'''Pinouts and connections:'''
'''I2C EEPROM:'''
The Microchip 24LC02B is connected to the Cypress FX2. The '''WP''' pin of the EEPROM can be jumpered to low or high, in order to write-protect it (or not). The address pins (A0-A2) are all connected to GND, which makes the I2C EEPROM address of the EEPROM 0x50.
{{chip_8pin|1=A0 <span style="color:green">(GND)</span>|2=A1 <span style="color:green">(GND)</span>|3= A2 <span style="color:green">(GND)</span>|4=GND|5=SDA <span style="color:green">(FX2 SDA)</span>|6=SCL <span style="color:green">(FX2 SCL)</span>|7=WP <span style="color:green">(jumper)</span>|8=VCC <span style="color:green">(3.3V)</span>}}


== Photos ==
== Photos ==

Revision as of 20:03, 25 July 2013

KingST KQS3506-LA16100
Kingst kqs3506 la16100.png
Status planned
Channels 2/4/8/16
Samplerate 100/50/25/12.5MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -0.9V — 6V
Threshold voltage configurable:
for 1.8V to 3.6V systems: VIH=1.4V, VIL=0.7V
for 5V systems: VIH=3.6V, VIL=1.4V
Memory none
Compression yes
Website taobao.com

The KingST KQS3506-LA16100 is a USB-based, 16-channel logic analyzer with 100/50/25/12.5MHz sampling rate (at 2/4/8/16 enabled channels).

This is a clone of the Saleae Logic16.

See KingST KQS3506-LA16100/Info for more details (such as lsusb -vvv output) about the device.

Hardware

Pinouts and connections:

I2C EEPROM:

The Microchip 24LC02B is connected to the Cypress FX2. The WP pin of the EEPROM can be jumpered to low or high, in order to write-protect it (or not). The address pins (A0-A2) are all connected to GND, which makes the I2C EEPROM address of the EEPROM 0x50.

A0 (GND) 1-   O -8 VCC (3.3V)
A1 (GND) 2- -7 WP (jumper)
A2 (GND) 3- -6 SCL (FX2 SCL)
GND 4- -5 SDA (FX2 SDA)

Photos

TODO.

Protocol

See Saleae_Logic16#Protocol.

Resources