Instrustar ISDS205X
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Status | planned |
---|---|
Channels | 2 |
Samplerate | 48MHz |
Analog bandwidth | 20MHz |
Vertical resolution | 8bit |
Triggers | none (SW-only) |
Input impedance | 1MΩ‖25pF |
Memory | none |
Display | none |
Connectivity | USB |
Website | instrustar.com |
The Instrustar ISDS205X is a USB-based
- 2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate,
- 2-channel "data recorder" (same as oscilloscope, simply storing the analog data),
- 2-channel spectrum analyzer with an analog bandwidth of 20MS/s,
- 1-channel DDS signal generator (sine, square, triangle, up sawtooth, down sawtooth); sine up to 20MHz, rest up to 2MHz,
- 8/16-channel logic analyzer with a max. sampling rate of 24MHz.
See Instrustar ISDS205X/Info for more details (such as lsusb -v output) on the device.
Hardware
Cypress FX2 pinout:
PD5 | 1- | O | -100 | |
PD6 | 2- | -99 | ||
PD7 | 3- | -98 | ||
GND | 4- | -97 | ||
CLKOUT | 5- | -96 | ||
VCC | 6- | -95 | ||
GND | 7- | -94 | ||
RDY0/*SLRD | 8- | -93 | ||
RDY1/*SLWR | 9- | -92 | ||
AVCC | 10- | -91 | ||
(24MHz crystal) XTALOUT | 11- | -90 | ||
(24MHz crystal) XTALIN | 12- | -89 | ||
AGND | 13- | -88 | ||
AVCC | 14- | -87 | ||
(USB D+) DPLUS | 15- | -86 | ||
(USB D-) DMINUS | 16- | -85 | ||
AGND | 17- | -84 | ||
VCC | 18- | -83 | ||
GND | 19- | -82 | ||
(CTL0, AD9288 ENCA/B) *IFCLK | 20- | -81 | ||
RESERVED | 21- | -80 | ||
(EEPROM SCL) SCL | 22- | -79 | ||
(EEPROM SDA) SDA | 23- | -78 | ||
VCC | 24- | -77 | ||
PB0 | 25- | -76 | ||
PB1 | 26- | -75 | ||
PB2 | 27- | -74 | ||
PB3 | 28- | -73 | ||
PB4 | 29- | -72 | ||
PB5 | 30- | -71 | ||
PB6 | 31- | -70 | ||
PB7 | 32- | -69 | ||
GND | 33- | -68 | ||
VCC | 34- | -67 | ||
GND | 35- | -66 | ||
CTL0 (IFCLK, AD9288 ENCA/B) | 36- | -65 | ||
CTL1 | 37- | -64 | PC7 | |
CTL2 | 38- | -63 | PC6 | |
VCC | 39- | -62 | PC5 | |
PA0 (74HC595D, DS) | 40- | -61 | PC4 | |
PA1 (74HC595D, STCP) | 41- | -60 | PC3 | |
PA2 (74HC595D, SHCP) | 42- | -59 | PC2 | |
PA3 (SHCP, Frequency Generator) | 43- | -58 | PC1 | |
PA4 (DS, Frequency Generator) | 44- | -57 | PC0 (Used as input, unknown) | |
PA5 (STCP, Frequency Generator) | 45- | -56 | PD4 | |
PA6 (1kHz scope cal pin) | 46- | -55 | PD3 | |
PA7 (activate analog mode vs digital mode) | 47- | -54 | PD2 | |
GND | 48- | -53 | PD1 | |
RESET# | 49- | -52 | PD0 | |
VCC | 50- | -51 | *WAKEUP |
NXP 74HC595D pinout:
(upper 74HC4051D, S0) Q1 | 1- | O | -16 | VCC |
(lower 74HC4051D, S0) Q2 | 2- | -15 | Q0 (upper 74HC4051D, S1) | |
(lower 74HC4051D, S1) Q3 | 3- | -14 | DS (FX2 PA0) | |
Q4 | 4- | -13 | OE# (GND) | |
Q5 | 5- | -12 | STCP (FX2 PA1) | |
Q6 | 6- | -11 | SHCP (FX2 PA2) | |
Q7 | 7- | -10 | MR# (VCC) | |
GND | 8- | -9 | Q7S |
NXP 74HC4051D (upper/lower, CH1/CH2) pinout:
|
|
Microchip 24LC02B (top / bottom) pinout:
|