Difference between revisions of "IEEE-488"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
|||
| Line 54: | Line 54: | ||
See also: [[Supported hardware]]. | See also: [[Supported hardware]]. | ||
== | == Resources == | ||
* [https://en.wikipedia.org/wiki/IEEE-488 IEEE-488 overview] at Wikipedia. | * [https://en.wikipedia.org/wiki/IEEE-488 IEEE-488 overview] at Wikipedia. | ||
* [https://en.wikipedia.org/wiki/Standard_Commands_for_Programmable_Instruments SCPI overview] at Wikipedia. | * [https://en.wikipedia.org/wiki/Standard_Commands_for_Programmable_Instruments SCPI overview] at Wikipedia. | ||
* The [http://linux-gpib.sourceforge.net/ linux-gpib] project consists of a series of Linux kernel drivers supporting various GPIB interfaces, and a userspace library in C to communicate with these drivers. | |||
* The [http://gpib-utils.sourceforge.net/ gpib-utils] project uses linux-gpib to provide access to a series of GPIB-devices. It also supports VXI-11 connectivity. | |||
Revision as of 23:12, 26 May 2012
IEEE-488, also known as GPIB or HP-IB, comprises a set of standards which allows various test and measurement gear to be controlled and queried remotely.
The following standards are involved:
- IEEE-488.1: Mechanical, electrical and basic protocol.
- IEEE-488.2: Formats and common commands.
- SCPI: Standard commands, built on top of IEEE-488.2. The standard is available here.
- USBTMC: The USB TMC device class, standard is available here.
While IEEE-488.1 defines the "Centronix-style" parallel connector, the other standards are in fact seen over other types of connections: RS-232, DB25 parallel connectors, and so on.
sigrok aims to support all of this: all of the command sets, on any device supporting them, across any interface.
GPIB PC interfaces
See GPIB Interface Comparison for a list of GPIB interfaces we know about.
See Supported hardware#GPIB_interfaces for the list of devices planned/supported in sigrok.
Command sets
| Command set | Status | Comments |
|---|---|---|
| SCPI | planned | |
| IEEE-488.2 | not yet supported | Standard document needed |
Devices
| Device | Status | Comments |
|---|---|---|
| Agilent MSO7104A | planned | USB-TMC. Probably same protocol on various Agilent MSO7xxxx series scopes. |
See also: Supported hardware.
Resources
- IEEE-488 overview at Wikipedia.
- SCPI overview at Wikipedia.
- The linux-gpib project consists of a series of Linux kernel drivers supporting various GPIB interfaces, and a userspace library in C to communicate with these drivers.
- The gpib-utils project uses linux-gpib to provide access to a series of GPIB-devices. It also supports VXI-11 connectivity.