ICStation USBRelay

From sigrok
Revision as of 12:33, 7 August 2021 by Knarfs (talk | contribs) (Initial device page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
ICStation USBRelay
ICStation ICSE012A-mugshot.png
Status in progress
Source code icstation-usbrelay
Channels 2, 4 or 8
Ratings 10A@250VAC, 10A@30VDC, 12A@125VAC, 12A@28VDC
Connectivity USB/Serial

The ICStation USBRelay is a USB relay card with up to 8 relays. Models with 2 (ICSE013A), 4 (ICSE012A) and 8 (ICSE014A) relays exist.

See Info for USB details.

Photos

Protocol

Example use

Detect the device and display its properties.

 $ ./sigrok-cli -d icstation-usbrelay:conn=/dev/ttyUSB0 --show
 Driver functions:
     Multiplexer
 Scan options:
     conn
     serialcomm
 icstation-usbrelay - ICStation ICSE012A
 Channel groups:
     R1: channel
     R2: channel
     R3: channel
     R4: channel
 Supported configuration options across all channel groups:
     enabled: on, off

Manipulate the state of relays.

 $ sigrok-cli -d icstation-usbrelay:conn=/dev/ttyUSB0 --config channel_group=R1:enabled=off --config channel_group=R2:enabled=on --set

Resources