Hantek iDSO1070A
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
| Status | planned |
|---|---|
| Channels | 2 |
| Samplerate | 250MS/s (125 for 2 channels) |
| Analog bandwidth | 70MHz |
| Vertical resolution | 8bit |
| Triggers | CH1, CH2, EXT (all hardware) |
| Input impedance | 1MΩ‖25pF |
| Memory | ? |
| Display | none |
| Connectivity | USB / WiFi |
| Website | hantek.com |
The Hantek iDSO1070A is a USB/WiFi-based, 2-channel oscilloscope with an analog bandwidth of 70MHz and 250MS/s sampling rate.
Hardware
- Main chip: Xilinx Spartan XC3S50A (datasheet)
- Wifi module: MxChip EMW3162 (datasheet)
- Main oscillator: 50MHz 50.000 YX FH
Photos
PCB, top
PCB, bottom
Channel module
WiFi Module
Detail
Notes
- Has been found cross channel interference. To observe this just connect Channel 1 to 5V DC and it is possible to see the shift of Channel 2 zero offset.
Protocol
Reverse engineered implementation of the protocol