Difference between revisions of "Hantek DSO-5200A"

From sigrok
Jump to navigation Jump to search
(Hardware specs.)
Line 7: Line 7:
== Hardware ==
== Hardware ==


TODO.
* '''Main chip''': Unknown FPGA/CPLD (likely XILINX CPLD, as in the [[Hantek DSO-2090]])
* '''USB''': Cypress CY7C68013A-100AXC (FX2)
* '''I2C EEPROM''': Microchip 24LC02BI (for the USB VID/PID of the Cypress FX2)
* '''512K x 8 High-speed CMOS static RAM''': 3x [http://www.issi.com/products-asynchronous-sram.htm ISSI IS61LV5128AL-10TLI] ([http://www.issi.com/pdf/61LV5128AL.pdf datasheet])
* '''1% Output Accuracy 600kHz/1.2MHz PWM Step-Up Regulator''': [http://www.intersil.com/content/intersil/en/products/power-management/switching-regulators/integrated-fet-regulators/ISL97519.html Intersil ISL97519IUZ] (marking: "7519Z G9KND") ([http://www.intersil.com/content/dam/Intersil/documents/fn64/fn6454.pdf datasheet])
* '''Quad/Dual, Low-Voltage, Bidirectional RF Video Switch''': [http://www.maxim-ic.com/datasheet/index.mvp/id/1727 Maxim MAX4547] ([http://datasheets.maxim-ic.com/en/ds/MAX4545-MAX4547.pdf datasheet])
* '''?''': National LMH65 74MA
* '''?''': HXN-AA
* '''Dual, Monolithic, N-Channel JFET''': multiple [http://www.calogic.net/j_amp.html CALOGIC SST5912-LF] ([http://www.calogic.net/pdf/SST5912_Datasheet_Rev_A.pdf datasheet])
* '''50MHz crystal''': 50.000 YX FH


== Photos ==
== Photos ==

Revision as of 21:12, 12 June 2012

Hantek DSO-5200A

The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.

See Hantek DSO-5200A/Info for more details (such as lsusb -vvv output) about the device.

Hardware

Photos

Protocol

TODO.

Extracting the firmware

TODO.