Difference between revisions of "Hantek DSO-5200A"

From sigrok
Jump to navigation Jump to search
(Created page with "The [http://www.hantek.com.cn/english/produce_list.asp?unid=66 Hantek DSO-5200A] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling...")
 
(Set status to Planned.)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The [http://www.hantek.com.cn/english/produce_list.asp?unid=66 Hantek DSO-5200A] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.
[[File:Hantek dso-5200a device front.jpg|thumb|right|Hantek DSO-5200A]]
 
The [http://www.hantek.com/en/ProductDetail_124.html Hantek DSO-5200A] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.


See [[Hantek DSO-5200A/Info]] for more details (such as '''lsusb -vvv''' output) about the device.
See [[Hantek DSO-5200A/Info]] for more details (such as '''lsusb -vvv''' output) about the device.
For more information about the devices in Hantek's USB oscilloscope devices, see [[Hantek DSO-2xxx/52xx]].


== Hardware ==
== Hardware ==


TODO.
* '''Main chip''': Unknown FPGA/CPLD (likely XILINX CPLD, as in the [[Hantek DSO-2090]])
* '''USB''': Cypress CY7C68013A-100AXC (FX2LP)
* '''I2C EEPROM''': Microchip 24LC02BI (for the USB VID/PID of the Cypress FX2LP)
* '''512K x 8 High-speed CMOS static RAM''': 3x [http://www.issi.com/products-asynchronous-sram.htm ISSI IS61LV5128AL-10TLI] ([http://www.issi.com/pdf/61LV5128AL.pdf datasheet])
* '''1% Output Accuracy 600kHz/1.2MHz PWM Step-Up Regulator''': [http://www.intersil.com/content/intersil/en/products/power-management/switching-regulators/integrated-fet-regulators/ISL97519.html Intersil ISL97519IUZ] (marking: "7519Z G9KND") ([http://www.intersil.com/content/dam/Intersil/documents/fn64/fn6454.pdf datasheet])
* '''Quad/Dual, Low-Voltage, Bidirectional RF Video Switch''': [http://www.maxim-ic.com/datasheet/index.mvp/id/1727 Maxim MAX4547] ([http://datasheets.maxim-ic.com/en/ds/MAX4545-MAX4547.pdf datasheet])
* '''?''': National LMH65 74MA
* '''?''': HXN-AA
* '''Dual, Monolithic, N-Channel JFET''': multiple [http://www.calogic.net/j_amp.html CALOGIC SST5912-LF] ([http://www.calogic.net/pdf/SST5912_Datasheet_Rev_A.pdf datasheet])
* '''50MHz crystal''': 50.000 YX FH


== Photos ==
== Photos ==


TODO.
<gallery>
File:Hantek dso-5200a package.jpg|<small>Package</small>
File:Hantek dso-5200a package contents.jpg|<small>Package contents</small>
File:Hantek dso-5200a device front.jpg|<small>Device, front</small>
File:Hantek dso-5200a device back.jpg|<small>Device, back</small>
File:Hantek dso-5200a device usb.jpg|<small>USB</small>
File:Hantek dso-5200a device channels.jpg|<small>Channels</small>
File:Hantek dso-5200a pcb front.jpg|<small>PCB, front</small>
File:Hantek dso-5200a pcb back.jpg|<small>PCB, back</small>
File:Hantek dso-5200a pcb version.jpg|<small>PCB version</small>
File:Hantek dso-5200a cypress cy7c68013a-100axc.jpg|<small>Cypress FX2LP</small>
File:Hantek dso-5200a microchip 24lc02bi.jpg|<small>Microchip 24LC02BI</small>
File:Hantek dso-5200a issi is61lv5128al-10tli.jpg|<small>ISSI IS61LV5128AL-10TLI</small>
File:Hantek dso-5200a 7519z g9knd.jpg|<small>7519Z G9KND</small>
File:Hantek dso-5200a maxim max4547.jpg|<small>Maxim MAX4547</small>
File:Hantek dso-5200a national lmh65 74ma.jpg|<small>National LMH65 74MA</small>
File:Hantek dso-5200a hxn-aa.jpg|<small>HXN-AA</small>
File:Hantek dso-5200a ti hc244.jpg|<small>TI HC244</small>
File:Hantek dso-5200a pcb analog1.jpg|<small>PCB, analog 1</small>
File:Hantek dso-5200a pcb analog2.jpg|<small>PCB, analog 2</small>
File:Hantek dso-5200a calogic sst5912 lf.jpg|<small>CALOGIC SST5912-LF</small>
File:Hantek dso-5200a 50mhz crystal.jpg|<small>50MHz crystal</small>
</gallery>


== Protocol ==
== Protocol ==


TODO.
See [[Hantek_DSO-2xxx/52xx#Protocol]].


== Extracting the firmware ==
== Extracting the firmware ==


TODO.
See [[Hantek_DSO-2xxx/52xx#Extracting_the_firmware]].
 
== Resources ==
 
* [http://www.hantek.com.cn/en/ProductDetail_44.html DSO2000 series model overview]
 
[[Category:Device]]
[[Category:Oscilloscope]]
[[Category:Planned]]

Latest revision as of 19:54, 20 December 2016

Hantek DSO-5200A

The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.

See Hantek DSO-5200A/Info for more details (such as lsusb -vvv output) about the device.

For more information about the devices in Hantek's USB oscilloscope devices, see Hantek DSO-2xxx/52xx.

Hardware

Photos

Protocol

See Hantek_DSO-2xxx/52xx#Protocol.

Extracting the firmware

See Hantek_DSO-2xxx/52xx#Extracting_the_firmware.

Resources