Hantek DSO-2xxx/52xx

From sigrok
Revision as of 22:03, 14 June 2012 by Bert (talk | contribs) (→‎Hardware)
Jump to navigation Jump to search

The Hantek DSO-2xxx/52xx is a series of inexpensive USB oscilloscopes. There are five models: the low-end 2090, 2150 and 2250, and the somewhat higher-end 5200 and 5200A. They are also sold as Voltcraft, with the same models numbers. Prices range from €120 - €260.

All models are USB powered, though the standard 5V/500mA from a standard USB connection is not enough: the units come with a "Y" cable, connecting the device's USB-B port to two USB-A ports on a USB hub. Probes are included in the box, with a rating matching to the model's analog bandwidth.

Sigrok currently supports the DSO-2090, and support for the DSO-5200A is in progress.

Hardware

The following features are common to all models (vendor specifications):

Channels 2
Impedance 1MΩ 25pF
Coupling AC/DC/GND
DC accuracy 3%
Vertical adjustable Yes
Input protection Diode clamping
EXT. input Yes
Trigger slope +/-
Trigger level adjustable Yes
Trigger source CH1, CH2, EXT
Pre/post trigger 0-100%

These are the differences between the models:

2090 2150 2250 5200 5200A
Bandwidth 40MHz 60MHz 100MHz 200MHz 200MHz
Single-shot bandwidth DC to 40MHz DC to 60MHz DC to 100MHz 80MHz 100MHz
Max. sample rate 100MS/s 150MS/s 250MS/s 200MS/s 250MS/s
Vertical resolution 8 bit 8 bit 8 bit 9 bit 9 bit
Buffer size 10KiB-32KiB/channel 10KiB-32KiB/channel 10KiB-512KiB/channel 10KiB-14KiB/channel 10KiB-512KiB/channel
Gain range 10mV-5V, 9 steps 10mV-5V, 9 steps 10mV-5V, 9 steps 10mV-10V, 10 steps 10mV-10V, 10 steps
Timebase range 4ns-1h, 38 steps 4ns-1h, 38 steps 4ns-1h, 38 steps 2ns-1h, 39 steps 2ns-1h, 39 steps