Difference between revisions of "Hantek DSO-2250"

From sigrok
Jump to navigation Jump to search
Line 26: Line 26:
<gallery>
<gallery>
File:Dso2250-Xilinx.jpg|<small>Xilinx SPARTAN XC3S50AN CPLD</small>
File:Dso2250-Xilinx.jpg|<small>Xilinx SPARTAN XC3S50AN CPLD</small>
File:Dso2250-RAM.jpg|<small>512Kx2 SRAM</small>
File:Dso2250-pcb-top.jpg|<small>DSO-2250 PCB top view</small>
File:Dso2250-pcb-bottom.jpg|<small>DSO-2250 PCB bottom view</small>
File:Dso2250-main-xtal.jpg|<small>Xilinx main oscillator</small>
File:Dso2250-ext channel.jpg|<small>External trigger channel</small>
File:Dso2250-buffer.jpg|<small>Octal buffer/line driver?</small>
File:Dso2250-capture-channel.jpg|<small>Input channel</small>
File:Dso2250-capture-channels.jpg|<small>Input channels front</small>
File:Dso2250-Cypress.jpg|<small>FX2 and EEPROM</small>
File:Dso2250-signal-gen.jpg|<small>1khz 2VPP signal generation circuitry and Cypress main EEPROM (U807)</small>
File:Dso2250-signal-gen.jpg|<small>1khz 2VPP signal generation circuitry and Cypress main EEPROM (U807)</small>
</gallery>
</gallery>

Revision as of 02:47, 24 March 2013

The Hantek DSO-2250 is an inexpensive USB-based oscilloscope. It has 2 channels, an analog bandwidth of 100MHz and 250MS/s sampling rate.

See Hantek DSO-2250/Info for more details (such as lsusb -vvv output) about the device.

For more information about the devices in Hantek's USB oscilloscope series, see Hantek DSO-2xxx/52xx.

Hardware

  • Xilinx SPARTAN XC3S50AN
  • 100 MHz oscillator
  • Cypress CY7C68013A (FX2)
  • 2 x ISSI IS61LV5128AL (512K SRAM)
  • Microchip 24LC0281 (FX2 EEPROM)
  • 54286 9CTG4 (near the 1Khz 2VPP signal gen)
  • HC244SJ - octal buffer / line driver?

Input stage:

Per channel:

Photos

Protocol

See Hantek_DSO-2xxx/52xx#Protocol.

Extracting the firmware

See Hantek_DSO-2xxx/52xx#Extracting_the_firmware.

Resources