Difference between revisions of "Hantek 6052BE"

From sigrok
Jump to navigation Jump to search
(Created page with "== Hardware == * '''Main chip''': [http://www.xilinx.com/support/documentation/spartan-3an_data_sheets.htm Xilinx Spartan XC3S50A] ([http://www.xilinx.com/support/documentati...")
 
Line 1: Line 1:
[[File:Hantek front.jpg|thumb|right|Hantek 6052BE]]
The [http://www.hantek.com/en/ProductDetail_2_31.html Hantek 6052BE] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 150MS/s sampling rate.
== Hardware ==
== Hardware ==


Line 6: Line 10:
* '''32K x 8 high-speed CMOS static RAM''': 2x [http://www.issi.com/products-asynchronous-sram.htm ISSI IS61LV256AL-10TLI] ([http://www.issi.com/WW/pdf/61LV256AL.pdf datasheet])
* '''32K x 8 high-speed CMOS static RAM''': 2x [http://www.issi.com/products-asynchronous-sram.htm ISSI IS61LV256AL-10TLI] ([http://www.issi.com/WW/pdf/61LV256AL.pdf datasheet])
* '''I2C EEPROM''': Microchip 24LC02BI (for the USB VID/PID of the Cypress FX2LP)
* '''I2C EEPROM''': Microchip 24LC02BI (for the USB VID/PID of the Cypress FX2LP)
== Photos ==
<gallery>
File:Hantek front.jpg|<small>Hantek 6052BE Front</small>
File:Hantek bak.jpg|<small>Hantek 6052BE Back</small>
File:Hantek 6052BE back.jpg|<small>PCB Hantek 6052BE Back</small>
File:Hantek 6052BE front.jpg|<small>PCB Hantek 6052BE Front</small>
</gallery>
== Protocol ==
== Extracting the firmware ==
== Resources ==
[[Category:Device]]
[[Category:Oscilloscope]]

Revision as of 16:32, 3 March 2014

Hantek 6052BE

The Hantek 6052BE is a USB-based, 2-channel oscilloscope with an analog bandwidth of 150MS/s sampling rate.

Hardware

Photos

Protocol

Extracting the firmware

Resources