Hantek 4032L

From sigrok
Revision as of 20:19, 21 May 2013 by Olegch (talk | contribs) (Created page with "{{Infobox logic analyzer | image = 180px | name = Hantek 4032L | status = planned | source_code_dir = |...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Hantek 4032L
Hantek4032L BoxSideView.png
Status planned
Channels 32
Samplerate 400MHz
Samplerate (state) ?
Triggers edge, pattern, pattern duration, combined
Min/max voltage -6V — +60V input, -6V — +6V threshold
Memory 256MiB
Compression -
Website hantek.com

The Hantek 4032L is a USB-based, 32-channel logic analyzer with up to 400MHz sampling rate and 256MiB memory.

See Hantek_4032L/Info for more details about the device.

Hardware

  • Xilinx Spartan-6 XC6SLX16 CSG324 DIV1225 (FPGA, 14579 logic cells, 2 DDR1/2/3 memory controllers, BGA324)
  • Cypress FX2LP CY7C68013A-100AXC (USB 2.0 HS controller, TQFP100)
  • 2x Micron MT47H64M16HR-25E:H (1Gbit DDR2 SDRAM, BGA)
  • TI TPS51116 (DDR memory power controller)
  • Unknown I2C EEPROM (marking removed, contains FX2 firmware)
  • MXIC MX25L4005 (4Mbit SPI flash, marking removed, contains FPGA bitstream)

Photos

Protocol

  • Vendor request is used to reset the engine and flush the buffers
  • Endpoint 2 is used for host-to-device command/parameters transfers
  • Endpoint 6 is used for device-to-host status/data transfers

TODO.

Resources

Hantek 4032L SDK (Windows only)