Difference between revisions of "HT USBee-DxPro"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) |
Uwe Hermann (talk | contribs) |
||
| Line 1: | Line 1: | ||
{{Infobox logic analyzer | {{Infobox logic analyzer | ||
| image = | | image = [[File:Ht usbee dxpro mugshot.png|180px]] | ||
| name = HT USBee-DxPro | | name = HT USBee-DxPro | ||
| status = planned | | status = planned | ||
Latest revision as of 17:20, 17 July 2016
 | |
| Status | planned |
|---|---|
| Source code | fx2lafw |
| Channels | 8/16 + 2 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | banggood.com |
The HT USBee-DxPro is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.
It is a clone of the CWAV USBee DX.
See HT USBee-DxPro/Info for some more details (such as lsusb -v output) on the device.
Note: Due to the fact that this device has two FX2 chips behind a USB hub inside, this will need extra code to enumerate correctly in sigrok.
Hardware
Photos
Package contents
Device, top
Device, bottom
Device, connectors
Device, USB
Package label
PCB, top
PCB, bottom
PCB, version
TLC5510I, 1
TLC5510I, 2
Cypress FX2, 1
Cypress FX2, 2
SMSC USB2512B
AMS1117
ICL7660, 1
ICL7660, 2
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
Resources
- Online shops: taobao.com, banggood.com