Difference between revisions of "Gossen Metrawatt Metrahit 14A"

From sigrok
Jump to navigation Jump to search
(→‎Measurement functions and ranges: Removed amps ranges that could not be found in device.)
 
(9 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Infobox multimeter
{{Infobox multimeter
| image          = <!-- [[File:Gossen Metrawatt Metrahit 14A small.png|180px]] -->
| image          = [[File:Gmc metrahit 14a logo.png|180px]]
| name            = [[Gossen Metrawatt]] Metrahit 14A
| name            = [[Gossen Metrawatt]] Metrahit 14A
| status          = progress
| status          = supported
| source_code_dir = gmx_mh_1x_2x
| source_code_dir = gmc-mh-1x-2x
| counts          = 3100
| counts          = 3100
| categories      = CAT III 1000 V, CAT IV 600 V
| categories      = CAT III 1000 V, CAT IV 600 V
| connectivity    = Infrared (RS232)
| connectivity    = Infrared (RS232)
| measurements    = voltage, current, resistance, capacitance, temperature, diode, continuity
| measurements    = voltage, current, resistance, temperature, diode, continuity
| features        = autorange, data hold, bargraph
| features        = autorange, data hold, bargraph
| <!-- website        = [http://...] -->
| <!-- website        = [http://...] -->
Line 16: Line 16:
It is very similar to the [[Gossen Metrawatt Metrahit 14S|Metrahit 14S]], but has no ranges of 3 µA= and 3 mA≈.
It is very similar to the [[Gossen Metrawatt Metrahit 14S|Metrahit 14S]], but has no ranges of 3 µA= and 3 mA≈.


'''This page is a work in progress, information incomplete and possibly inaccurate!'''
<!--
== Hardware ==
== Hardware ==


* '''Battery''':  ''9 V IEC 6 F 22'' or ''IEC 6 LR 61'' or corresponding rechargeable battery
* '''Battery''':  ''9 V IEC 6 F 22'' or ''IEC 6 LR 61'' or corresponding rechargeable battery
* '''Fuse''':  
* '''Fuse''':  
** Current 300 mA: FF (UR) 1,6 A/500G; 6,3x32 mm
** Current 300 mA: FF 1,6 A/500G; 6,3x32 mm
** Current 3A, 10A:  
** Current 3A, 10A:  
*** Siba Ultrarapid 16A/600 V≈ 10mm x 38 mm
*** Siba Ultrarapid 16A/600 V≈ 10mm x 38 mm
Line 34: Line 31:


<gallery>
<gallery>
File:metrahit_18S_1.jpg|<small>Package</small>
File:Gmc metrahit 14a front.jpg|<small>Front</small>
File:metrahit_18S_2.jpg|<small>Inside</small>
File:Gmc metrahit 14a display.jpg|<small>Display</small>
File:metrahit_18S_4.jpg|<small>Display</small>
File:Gmc metrahit 14a back.jpg|<small>Back</small>
File:metrahit_18S_3.jpg|<small>IR Interface</small>
File:Gmc metrahit 14a inside 1.jpg|<small>Back/battery cover removed</small>
File:Gmc metrahit 14a inside 2.jpg|<small>Cover removed</small>
</gallery>
</gallery>
-->


== Measurement functions and ranges ==
== Measurement functions and ranges ==
Line 57: Line 53:
| 30.00 mV
| 30.00 mV
| 10 μV
| 10 μV
| rowspan="2" | ±(1,0% + 3)
| rowspan="2" | ±(0.5% + 3)
| mq V, unit V, mqflags DC
| mq V, unit V, mqflags DC
| Manual range  
| Manual range  
Line 70: Line 66:
| 3.000 V
| 3.000 V
| 1 mV
| 1 mV
| rowspan="3" | ±(0,15% + 1)
| rowspan="3" | ±(0.25% + 1)
| "
| "
|  
|  
Line 89: Line 85:
| 1000 V
| 1000 V
| 1 V
| 1 V
| ±(0,2% + 1)
| ±(0.35% + 1)
| "
| "
|  
|  
Line 96: Line 92:
| rowspan="4" | V≈
| rowspan="4" | V≈
| 3.000 V
| 3.000 V
| 100 μV
| 1 mV
| rowspan="4" | ±(0,4% + 2)  
| rowspan="4" | ±(0.75% + 2)  
| "
| "
|  
|  
Line 103: Line 99:
|-
|-
| 30.00 V
| 30.00 V
| 100 μV
| 10 mV
| "
| "
|  
|  
Line 109: Line 105:
|-
|-
| 300.0 V
| 300.0 V
| 1 mV
| 100 mV
| "
| "
|  
|  
Line 115: Line 111:
|-
|-
| 1000 V
| 1000 V
| 10 mV
| 1 V
| "
| "
|  
|  


|-
|-
| rowspan="3" | A=
| rowspan="5" | A=
| 3.000 mA
| 1 µA
| ±(1.0% + 5)
| mq Curr., unit A, mqflags DC
| Disabled on power on, see below.
 
|-
| 30.00 mA
| 30.00 mA
| 10 µA
| 10 µA
|  
| ±(0.25% + 2)
| mq Curr., unit A, mqflags DC
| "
|  
|  


Line 130: Line 133:
| 300.0 mA
| 300.0 mA
| 100 µA
| 100 µA
| ±(1.0% + 2)
| "
|  
|  
|-
| 3.000 A
| 1 mA
| ±(1.0% + 5)
| "
| "
|  
| Disabled on power on, see below.


|-
|-
| 10.00 A
| 10.00 A
| 10 mA
| 10 mA
|  
| ±(1.0% + 2)
| "
| "
|  
|  
Line 145: Line 155:
| 30.00 mA
| 30.00 mA
| 10 µA
| 10 µA
|  
| rowspan="3" | ±(1.5% + 2)
| mq Curr., unit A, mqflags AC,DC,RMS
| mq Curr., unit A, mqflags AC
|   
|   


Line 152: Line 162:
| 300.0 mA
| 300.0 mA
| 100 µA
| 100 µA
|
| "
| "
|  
|  
Line 159: Line 168:
| 10.00 A
| 10.00 A
| 10 mA
| 10 mA
|
| "
| "
|  
|  
Line 169: Line 177:
|  
|  
| mq Res., unit Ω, mqflags -
| mq Res., unit Ω, mqflags -
|
| Allows setting zero: Press yellow button short, decimal dot blinks. Press yellow button long until device beeps twice or switch off to disable.


|-
|-
| 300 Ω
| 300.0 Ω
| 100 mΩ
| 100 mΩ
|  
|  
Line 179: Line 187:
|-
|-
| 3.000 kΩ
| 3.000 kΩ
| 100 mΩ
| 1 Ω
|  
|  
| "
| "
Line 186: Line 194:
|-
|-
| 30.00 kΩ
| 30.00 kΩ
| 1 Ω
| 10 Ω
|  
|  
| "
| "
Line 193: Line 201:
|-
|-
| 300.0 kΩ
| 300.0 kΩ
| 10 Ω
| 100 Ω
|  
|  
| "
| "
Line 200: Line 208:
|-
|-
| 3.000 MΩ
| 3.000 MΩ
| 100 Ω
| 1 kΩ
|  
|  
| "
| "
Line 207: Line 215:
|-
|-
| 30.00 MΩ
| 30.00 MΩ
| 1 kΩ
| 10 kΩ
|  
|  
| "
| "
Line 272: Line 280:
|-
|-
|}
|}
To enable the ranges 3.000 mA and 3.000 A, switch function selector to circle with dot symbol and press yellow button. Wait until auto calibration of these ranges is finished ("CAL" in display disappears). After that the ranges are available in the mA resp. A function until multimeter powered off automatically or manually.


The column "sigrok result" contains in short form what the driver generates for the resp. data type.
The column "sigrok result" contains in short form what the driver generates for the resp. data type.


[[Category:Device]]
[[Category:Device]]
[[Category:Multimeter]]
[[Category:Multimeter]]
[[Category:In Progress]]
[[Category:Supported]]

Latest revision as of 21:30, 21 September 2016

Gossen Metrawatt Metrahit 14A
Gmc metrahit 14a logo.png
Status supported
Source code gmc-mh-1x-2x
Counts 3100
IEC 61010-1 CAT III 1000 V, CAT IV 600 V
Connectivity Infrared (RS232)
Measurements voltage, current, resistance, temperature, diode, continuity
Features autorange, data hold, bargraph

The Gossen Metrawatt Metrahit 14A is a 3100 counts handheld digital multimeter with IR (RS232) connectivity.

It is very similar to the Metrahit 14S, but has no ranges of 3 µA= and 3 mA≈.

Hardware

  • Battery: 9 V IEC 6 F 22 or IEC 6 LR 61 or corresponding rechargeable battery
  • Fuse:
    • Current 300 mA: FF 1,6 A/500G; 6,3x32 mm
    • Current 3A, 10A:
      • Siba Ultrarapid 16A/600 V≈ 10mm x 38 mm
      • Littlefuse KLK 15A/600 V≈ 13/32” / 1 1/2”
      • Bussmann KLK 15A/600 V≈ 13/32” / 1 1/2”
  • TODO.

Photos

  • Front

  • Display

  • Back

  • Back/battery cover removed

  • Cover removed

Measurement functions and ranges

Measurement function Range Resolution Accuracy sigrok result Remarks
V= 30.00 mV 10 μV ±(0.5% + 3) mq V, unit V, mqflags DC Manual range
300.0 mV 100 μV " "
3.000 V 1 mV ±(0.25% + 1) "
30.00 V 10 mV "
300.0 V 100 mV "
1000 V 1 V ±(0.35% + 1) "
V≈ 3.000 V 1 mV ±(0.75% + 2) "
30.00 V 10 mV "
300.0 V 100 mV "
1000 V 1 V "
A= 3.000 mA 1 µA ±(1.0% + 5) mq Curr., unit A, mqflags DC Disabled on power on, see below.
30.00 mA 10 µA ±(0.25% + 2) "
300.0 mA 100 µA ±(1.0% + 2) "
3.000 A 1 mA ±(1.0% + 5) " Disabled on power on, see below.
10.00 A 10 mA ±(1.0% + 2) "
A≈ 30.00 mA 10 µA ±(1.5% + 2) mq Curr., unit A, mqflags AC
300.0 mA 100 µA "
10.00 A 10 mA "
Ω 30.00 Ω 10 mΩ mq Res., unit Ω, mqflags - Allows setting zero: Press yellow button short, decimal dot blinks. Press yellow button long until device beeps twice or switch off to disable.
300.0 Ω 100 mΩ "
3.000 kΩ 1 Ω "
30.00 kΩ 10 Ω "
300.0 kΩ 100 Ω "
3.000 MΩ 1 kΩ "
30.00 MΩ 10 kΩ "
Diode/Cont. 3.000 V– 1 mV mq V, unit V, mqflags DC,DIODE Diode and cont. are identical on this device, just without beeper for diode.
°C Pt100 –200.0 - +200.0 °C 0.1 °C 2 Kelvin + 5 mq Temp., unit °C, mqflags -
Pt100 +200.0 - +850.0 °C ±(1.0% + 5) "
Pt1000 –100.0 - +200.0 °C 2 Kelvin + 2 "
Pt1000 +200.0 - +850.0 °C ±(1.0% + 2) "
Data Hold mqflags += HOLD Disabled while IR interface is active.
MIN mqflags += MIN Influences only display, via IR flag is set, but actual current value is delivered.
MAX mqflags += MAX Influences only display, via IR flag is set, but actual current value is delivered.

To enable the ranges 3.000 mA and 3.000 A, switch function selector to circle with dot symbol and press yellow button. Wait until auto calibration of these ranges is finished ("CAL" in display disappears). After that the ranges are available in the mA resp. A function until multimeter powered off automatically or manually.

The column "sigrok result" contains in short form what the driver generates for the resp. data type.

Retrieved from "https://sigrok.org/w/index.php?title=Gossen_Metrawatt_Metrahit_14A&oldid=11922"