Difference between revisions of "FTDI-LA"

From sigrok
Jump to navigation Jump to search
(Temporary FTDI chip photo.)
Line 13: Line 13:
}}
}}


There's a best-effort driver to acquire raw samples from any FTDI chip supporting bitbanging. '''''It doesn't guarantee overrun-free operation so it may lose samples''''', yet moving the device to a separate USB host or lowering the sample rate helps.
There's a best-effort driver to acquire raw samples from any FTDI chip supporting bitbang modes. '''''It doesn't guarantee overrun-free operation so it may lose samples''''', yet moving the device to a separate USB host or lowering the sample rate helps.


== Hardware ==
== Hardware ==


FT232RL and FT2232H are known to work, and adding an unsupported chip should be easy. Boards with the former are available on ebay for $3, but it doesn't support USB 2.0 hence sample rates will be lower.
FT232RL and FT2232H are known to work, and adding an unsupported chip should be easy. Boards with the former are available on ebay for $3, but it doesn't support USB 2.0 hence sample rates will be lower. FT*H chips may provide ~20MHz sample rate over a reliable high speed USB link and (bursts of?) 60MHz using synchronous FIFO mode (not implemented in the sigrok driver).


[[Category:Device]]
[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Logic analyzer]]
[[Category:Supported]]
[[Category:Supported]]

Revision as of 02:52, 10 June 2017

Raw FTDI chip digital inputs
Chronovu la8 ftdi ft245rl.jpg
Status supported
Source code ftdi-la
Channels 8
Samplerate 10MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage 0V — 5V
Memory none
Compression none

There's a best-effort driver to acquire raw samples from any FTDI chip supporting bitbang modes. It doesn't guarantee overrun-free operation so it may lose samples, yet moving the device to a separate USB host or lowering the sample rate helps.

Hardware

FT232RL and FT2232H are known to work, and adding an unsupported chip should be easy. Boards with the former are available on ebay for $3, but it doesn't support USB 2.0 hence sample rates will be lower. FT*H chips may provide ~20MHz sample rate over a reliable high speed USB link and (bursts of?) 60MHz using synchronous FIFO mode (not implemented in the sigrok driver).