Difference between revisions of "FTDI-LA"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) (Temporary FTDI chip photo.) |
|||
| Line 1: | Line 1: | ||
{{Infobox logic analyzer | {{Infobox logic analyzer | ||
| image = [[File: | | image = [[File:Chronovu la8 ftdi ft245rl.jpg|180px]] | ||
| name = Raw FTDI chip digital inputs | | name = Raw FTDI chip digital inputs | ||
| status = supported | | status = supported | ||
Revision as of 01:07, 10 June 2017
 | |
| Status | supported |
|---|---|
| Source code | ftdi-la |
| Channels | 8 |
| Samplerate | 10MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | 0V — 5V |
| Memory | none |
| Compression | none |
There's a best-effort driver to acquire raw samples from any FTDI chip supporting bitbanging. It doesn't guarantee overrun-free operation so it may lose samples, yet moving the device to a separate USB host or lowering the sample rate helps.
Hardware
FT232RL and FT2232H are known to work, and adding an unsupported chip should be easy. Boards with the former are available on ebay for $3, but it doesn't support USB 2.0 hence sample rates will be lower.