Difference between revisions of "EE Electronics ESLA201A"

From sigrok
Jump to navigation Jump to search
m
Line 4: Line 4:
| status          = supported
| status          = supported
| source_code_dir  = fx2lafw
| source_code_dir  = fx2lafw
| channels        = 8
| channels        = 8 + 1
| samplerate      = 24MHz
| samplerate      = 8ch @ 24MHz, 8+1ch @ 12MHz
| samplerate_state = —
| samplerate_state = —
| triggers        = none (SW-only)
| triggers        = none (SW-only)
| voltages        = max. 5.5V
| voltages        = max. 5.5V
| threshold        = Fixed: VIH=1.4V, VIL=0.8V
| threshold        = Fixed: V<sub>IH</sub>=1.4V, V<sub>IL</sub>=0.8V
| memory          = none
| memory          = none
| compression      = none
| compression      = none
| website          = [http://eeelec.com/xla/ eeelec.com]
| website          = [https://web.archive.org/web/20110213013236/http://eeelec.com/xla/ eeelec.com]
}}
}}


The '''EE Electronics ESLA201A''' a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.
The '''EE Electronics ESLA201A''' a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 1 additional analog channel (theoretically 2, but only one of them can be used at a time; 3MHz analog bandwidth).


It is a clone of the [[CWAV USBee AX-Pro]].
It is a clone of the [[CWAV USBee AX-Pro]].
Line 21: Line 21:
In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.
In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.


'''Note''': Only the logic analyzer functionality is supported so far, analog support is work in progress.  
'''Note''': [[fx2lafw]] currently doesn't support switching between the two possible analog channels, 1ACH (TODO: not verified on hardware) will be used unconditionally.


See [[EE Electronics ESLA201A/Info]] for some more details (such as '''lsusb -vvv''' output) on the device.
See [[EE Electronics ESLA201A/Info]] for some more details (such as '''lsusb -vvv''' output) on the device.
Line 55: Line 55:


* [http://stores.ebay.com/eeelec Eeelec eBay store] and [http://store.eeelec.com/ Eeelec webshop]
* [http://stores.ebay.com/eeelec Eeelec eBay store] and [http://store.eeelec.com/ Eeelec webshop]
* [http://eeelec.com/xla/ Eeelec: Software download location]
* [https://web.archive.org/web/20110213013236/http://eeelec.com/xla/ Eeelec: Software download location]


[[Category:Device]]
[[Category:Device]]

Revision as of 00:37, 18 September 2017

EE Electronics ESLA201A
Esla201a.png
Status supported
Source code fx2lafw
Channels 8 + 1
Samplerate 8ch @ 24MHz, 8+1ch @ 12MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage max. 5.5V
Threshold voltage Fixed: VIH=1.4V, VIL=0.8V
Memory none
Compression none
Website eeelec.com

The EE Electronics ESLA201A a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, with 1 additional analog channel (theoretically 2, but only one of them can be used at a time; 3MHz analog bandwidth).

It is a clone of the CWAV USBee AX-Pro.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

Note: fx2lafw currently doesn't support switching between the two possible analog channels, 1ACH (TODO: not verified on hardware) will be used unconditionally.

See EE Electronics ESLA201A/Info for some more details (such as lsusb -vvv output) on the device.

Hardware

Analog frontend:

ESLA201A Analog.svg

Photos

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

The USBee AX software controls the unit through a combination of command messages, and firmware patched for sample rates etc. downloaded before each capture. For this reason we have abandoned efforts to decode the protocol, and are working instead on fx2lafw — a replacement open source firmware for the device.

Resources