Difference between revisions of "EE Electronics ESLA201A"

From sigrok
Jump to navigation Jump to search
m
Line 8: Line 8:
| samplerate_state = —
| samplerate_state = —
| triggers        = none (SW-only)
| triggers        = none (SW-only)
| voltages        = ?
| voltages        = max. 5.5V
| threshold        = Fixed: VIH=1.4V, VIL=0.8V
| memory          = none
| memory          = none
| compression      = none
| compression      = none

Revision as of 12:38, 28 July 2013

EE Electronics ESLA201A
Esla201a.png
Status supported
Source code fx2lafw
Channels 8
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage max. 5.5V
Threshold voltage Fixed: VIH=1.4V, VIL=0.8V
Memory none
Compression none
Website eeelec.com

The EE Electronics ESLA201A a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the CWAV USBee AX-Pro.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.

See EE Electronics ESLA201A/Info for some more details (such as lsusb -vvv output) on the device.

Hardware

Analog frontend:

ESLA201A Analog.svg

Photos

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

The USBee AX software controls the unit through a combination of command messages, and firmware patched for sample rates etc. downloaded before each capture. For this reason we have abandoned efforts to decode the protocol, and are working instead on fx2lafw — a replacement open source firmware for the device.

Resources