DreamSourceLab DSLogic U2Basic
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
| Status | planned |
|---|---|
| Source code | dreamsourcelab-dslogic |
| Channels | 1-16 |
| Samplerate | Stream mode: 100MHz(3ch), 50MHz(6ch), 25MHz(12ch), 20MHz(16ch) |
| Website | dreamsourcelab.com |
The DreamSourceLab DSLogic U2Basic is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels).
See DreamSourceLab DSLogic U2Basic/Info for more details (such as lsusb -v output) about the device.
Hardware
- FPGA: Xilinx Spartan-6 XC6SLX9
- USB: Cypress CY7C68013A (FX2)
- I²C EEPROM: ST 4128BRP
- SDRAM: Winbond W9864G6KH-6
- Crystal: 24MHz
Photos
Package
Device, top
Device, bottom
USB connector
Probe connector
USB cable
Probe cables
Probes
PCB, top
PCB, bottom
Xilinx XC6SLX9
Cypress FX2
Winbond W9864G6KH-6
USB area
Input stage
24MHz crystal
Firmware
See DreamSourceLab DSLogic#Firmware.
Note: The FX2 firmware is loaded at powerup from the I²C EEPROM on the PCB.
EEPROM layout
The device has an I²C EEPROM with the following layout:
c2 0e 2a 29 00 00 00 04 XX XX XX XX XX XX .. ..
Description:
| Bytes | Description |
|---|---|
| 0 | 0xc2: FX2 "c2 load" mode, i.e. VID/PID/DID are loaded from EEPROM as the firmware. |
| 1-2 | 0x2a0e: USB vendor ID (VID before firmware renumerate). |
| 3-4 | 0x0029: USB product ID (PID before firmware renumerate). |
| 5-6 | 0x0000: USB device ID (DID before firmware renumerate). |
| 7 | 0x04: FX2 configuration byte (see FX2 TRM for details). |
| 8 - 6977 | Firmware (6970 bytes, sha1sum: 47975f295711cf0208bbd963bbfeaf5b36e87b8724cad1e67c0de1a86065b389) |
| Rest | Unknown, probably all-0xff. |