Difference between revisions of "DreamSourceLab DSLogic Pro"

From sigrok
Jump to navigation Jump to search
m
 
(2 intermediate revisions by 2 users not shown)
Line 3: Line 3:
| name            = DreamSourceLab DSLogic Pro
| name            = DreamSourceLab DSLogic Pro
| status          = supported
| status          = supported
| source_code_dir  = fx2lafw
| source_code_dir  = dreamsourcelab-dslogic
| channels        = 1-16
| channels        = 1-16
| samplerate      = 400MHz(4ch), 200MHz(8ch), 100MHz(16ch)
| samplerate      = 400MHz(4ch), 200MHz(8ch), 100MHz(16ch)
| samplerate_state = 50MHz
| samplerate_state = 30MHz (?) or 50MHz (?)
| triggers        = high, low, rising, falling, edge, multi-stage triggers
| triggers        = high, low, rising, falling, edge, multi-stage triggers
| voltages        = -0.6V — 6V
| voltages        = -0.6V — 6V

Latest revision as of 17:27, 28 December 2017

DreamSourceLab DSLogic Pro
DSLogic.png
Status supported
Source code dreamsourcelab-dslogic
Channels 1-16
Samplerate 400MHz(4ch), 200MHz(8ch), 100MHz(16ch)
Samplerate (state) 30MHz (?) or 50MHz (?)
Triggers high, low, rising, falling, edge, multi-stage triggers
Min/max voltage -0.6V — 6V
Threshold voltage configurable: 0-5V (0.1V increments)
Memory 32MByte (2MByte/ch)
Compression yes
Website dreamsourcelab.com

The DreamSourceLab DSLogic Pro is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels). This differs slightly from the original DSLogic product in its configurable threshold voltage and different PCB layout. DreamSourceLab doesn't make the distinction between these two products very clear on their website.

See DreamSourceLab DSLogic Pro/Info for more details (such as lsusb -v output) about the device.

Hardware

Photos

Firmware

See DreamSourceLab DSLogic#Firmware.

Resources