Difference between revisions of "DreamSourceLab DSLogic Plus"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) |
Uwe Hermann (talk | contribs) |
||
| Line 23: | Line 23: | ||
== Photos == | == Photos == | ||
'''Device''': | |||
<gallery> | <gallery> | ||
</gallery> | |||
'''Cables''': | |||
<gallery> | |||
File:Dreamsourcelab dslogic plus cable 1.jpg | |||
File:Dreamsourcelab dslogic plus cable 2.jpg | |||
File:Dreamsourcelab dslogic plus cable 3.jpg | |||
File:Dreamsourcelab dslogic plus cable 4.jpg | |||
File:Dreamsourcelab dslogic plus cable 5.jpg | |||
File:Dreamsourcelab dslogic plus probe circuit.png|<small>Probe cable circuit</small> | |||
</gallery> | </gallery> | ||
Revision as of 18:56, 28 December 2017
 | |
| Status | supported |
|---|---|
| Source code | dreamsourcelab-dslogic |
| Channels | 1-16 |
| Samplerate | 400MHz(4ch), 200MHz(8ch), 100MHz(16ch) |
| Samplerate (state) | 30MHz (?) or 50MHz (?) |
| Triggers | high, low, rising, falling, edge, multi-stage triggers |
| Min/max voltage | -0.6V — 6V |
| Threshold voltage | configurable: 0-5V (0.1V increments) |
| Memory | 32MByte (2MByte/ch) |
| Compression | yes |
| Website | dreamsourcelab.com |
The DreamSourceLab DSLogic Plus is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels). This differs slightly from the original DSLogic product in its configurable threshold voltage and different PCB layout. DreamSourceLab doesn't make the distinction between these two products very clear on their website.
See DreamSourceLab DSLogic Plus/Info for more details (such as lsusb -v output) about the device.
Hardware
Photos
Device:
Cables:
Probe cable circuit
Firmware
See DreamSourceLab DSLogic#Firmware.