Difference between revisions of "BBC Goertz Metrawatt M2110"
Jump to navigation
Jump to search
m |
m |
||
| Line 18: | Line 18: | ||
= Hardware = | = Hardware = | ||
'''RS232 Interface:''' | '''RS232 Interface:''' | ||
* 150/300/600/1200/2400/4800/9600 | * Baud rates 150/300/600/1200/2400/4800/9600, configurable via rotary switch | ||
* 7 data bits | * 7 data bits | ||
* No/even/odd parity, configurable via DIP switches | * No/even/odd parity bit, configurable via DIP switches | ||
* 1 or 2 stop bits, configurable via DIP switch | * 1 or 2 stop bits, configurable via DIP switch | ||
* Optional CTS handshake, configurable via DIP switch | * Optional CTS handshake, configurable via DIP switch | ||
| Line 28: | Line 28: | ||
* Max. 1,5 measurements/s. | * Max. 1,5 measurements/s. | ||
''RS232 cable:'' | '''RS232 cable:''' | ||
* 25 pin "female" connector | * 25 pin "female" connector | ||
* Null modem cable required (DTE configuration)! | * Null modem cable required (DTE configuration)! | ||
| Line 43: | Line 43: | ||
== Resources == | == Resources == | ||
* Manual (PDF) available from [[Gossen Metrawatt]] Customer Support. | |||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Multimeter]] | [[Category:Multimeter]] | ||
[[Category:In progress]] | [[Category:In progress]] | ||
Revision as of 21:07, 18 December 2013
| Status | in progress |
|---|---|
| Source code | serial-dmm |
| Counts | 30000 |
| Connectivity | RS232 |
| Measurements | voltage, current, resistance, capacitance, temperature, diode, continuity |
| Features | manual range |
The BBC Goertz Metrawatt M2110 is a historic (about 1984) 30000 count bench multimeter with RS232 connectivity.
The manufacturer is called Gossen Metrawatt today.
Hardware
RS232 Interface:
- Baud rates 150/300/600/1200/2400/4800/9600, configurable via rotary switch
- 7 data bits
- No/even/odd parity bit, configurable via DIP switches
- 1 or 2 stop bits, configurable via DIP switch
- Optional CTS handshake, configurable via DIP switch
- Output intervals 0,66s/10s/1m/10m/1h/manual/remote controlled, configurable via rotary switch
- Manual output sends value on button Start/Reset pressed.
- Remote controlled output sends data on CTS set or ENQ sent, configurable via DIP switches
- Max. 1,5 measurements/s.
RS232 cable:
- 25 pin "female" connector
- Null modem cable required (DTE configuration)!
Photos
Protocol
msg := SDDDDDD | 'OVERRNG' CR LF S := '-' | ' ' D := '0'..'9'|'.'
Resources
- Manual (PDF) available from Gossen Metrawatt Customer Support.