Difference between revisions of "Agilent DSO1014A"

**Agilent DSO1014A**
Status	supported
Source code	rigol-ds
Channels	4
Samplerate	2GSa/s (2ch), 1GSa/s (4ch)
Samplerate (eq. time)	?
Analog bandwidth	100MHz
Vertical resolution	8bits
Triggers	edge, pulse width, bit pattern, composite video, alternate
Input impedance	1MΩ‖18pF 300 V RMS CAT I
Memory	20kpts (2ch), 10kpts (4ch)
Display	5.7" QVGA (320x240)
Connectivity	USB host/device
Features	"true zoom", go/nogo mask testing
Website	agilent.com

Revision as of 01:31, 6 January 2014

The Agilent DSO1014A is a 4-channel oscilloscope with an analog bandwidth of 100MHz, 2GSa/s sampling rate, and USB connectivity.

See Agilent DSO1014A/Info for more details (such as lsusb -v output) about the device.

See Agilent DSO1000 Series for information common to all devices in this series.

@@ Line 18: / Line 18: @@
 }}
-The '''Agilent DSO1014A''' is a USB-based, 4-channel oscilloscope with an analog bandwidth of 100MHz and 2GSa/s sampling rate.
+The '''Agilent DSO1014A''' is a 4-channel oscilloscope with an analog bandwidth of 100MHz, 2GSa/s sampling rate, and USB connectivity.
 See [[Agilent DSO1014A/Info]] for more details (such as '''lsusb -v''' output) about the device.
-== Hardware ==
+See [[Agilent DSO1000 Series]] for information common to all devices in this series.
-TODO.
 == Photos ==
@@ Line 32: / Line 30: @@
 File:Agilent DSO1014A back.png|<small>Device, back</small>
 </gallery>
-== Protocol ==
-The device uses [[USBTMC]] for communication with a host PC.
-== Resources ==
-* [http://mightyohm.com/blog/2009/11/agilent-dso1000-firmware-update-confirms-rigol-connection/ MightyOhm: Agilent firmware update confirms Rigol connection]
-* [http://cp.literature.agilent.com/litweb/pdf/5989-9368EN.pdf DSO1000A/B Series Portable Oscilloscopes Data Sheet]
-* [http://www.home.agilent.com/upload/cmc_upload/All/1000_series_prog_guide.pdf Agilent 1000 Series Oscilloscopes Programmer's Guide]
 [[Category:Device]]
 [[Category:Oscilloscope]]
 [[Category:Supported]]