Difference between revisions of "ARMFLY Mini-Logic"

From sigrok
Jump to navigation Jump to search
m
m
Line 11: Line 11:
| memory          = none
| memory          = none
| compression      = none
| compression      = none
| website          = [http://armfly.com/product/Mini-Logic/mini-logic.htm armfly.com]
| website          = [http://www.armfly.com/product/Mini-Logic/mini-logic.htm armfly.com]
}}
}}



Revision as of 04:49, 11 January 2013

ARMFLY Mini-Logic
ARMFLY MINI LOGIC.png
Status supported
Source code fx2lafw
Channels 8
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage ?
Memory none
Compression none
Website armfly.com

The ARMFLY Mini-Logic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

It is a clone of the CWAV USBee AX-Pro, but it doesn't have analog (only 8-channel digital) sampling capabilities. There is an "RS232 RS485 RS422 CAN converter" add-on board for more functionality (not supported in sigrok, though).

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

See ARMFLY Mini-Logic/Info for more detailed information on the device.

Hardware

  • Main chip: Cypress CY7C68013A-56LTXC (56pin QFN package)
  • I2C EEPROM: Atmel ATML920 24C02N SU27 D
  • Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3
  • 24MHz crystal: 24.000

Photos

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources