sigrok - User contributions [en]

Mcupro Logic16 clone

2015-09-29T13:56:47Z

Sout:

{{DISPLAYTITLE:mcupro Logic16 clone}}
{{Infobox logic analyzer
| image = [[File:Mcupro_Logic16_overview.png|180px]]
| name = mcupro Logic16 clone
| status = supported
| source_code_dir = saleae-logic16
| channels = 3/6/9/16
| samplerate = 100/50/32/16MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.9V — 6V
| threshold = 1.5V (operates with 3.3V logic)
| memory = none
| compression = yes
| website = [http://www.aliexpress.com/store/product/USB-Logic-Analyzer-100M-max-sample-rate-16Channels-10B-samples-MCU-ARM-FPGA-debug-tool/614202_1916810169.html aliexpress.com]
}}

The '''mcupro Logic16 clone''' is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).

This is a clone of the [[Saleae Logic16]].

See [[mcupro Logic16 clone/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware (Actel variant) ==

* '''FPGA''': [https://www.actel.com/documents/PA3_DS.pdf Actel A3P125]
* '''USB interface chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc3256.pdf Atmel 24C02N]
* '''3.3V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-3.3]
* '''1.5V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-1.5]
* '''Crystal:''' 24.000MHz

== Hardware (Cylone variant) ==

* '''FPGA''': [https://www.altera.com/products/fpga/cyclone-series/cyclone/support.html#Cyclone-Device-Handbook--All-Sections- Altera Cyclone EP1C3T100]
* '''USB interface chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc3256.pdf Atmel 24C02N]
* '''3.3V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-3.3]
* '''1.5V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-1.5]
* '''Crystal (FX2):''' 24.000MHz
* '''Crystal (FPGA):''' 100.000MHz
* '''FPGA Bitstream''' 25P10 1MBit SPI NOR flash, ST Microelectronics
* '''Bootstrap Controller''' STCMCU 15F10, 8051 compatible

== Hardware (2015-01-08 variant) ==
PCB Marked "Saleae Logic 16 By MCUPro 2015-1-8" Readily identifiable by the irregular pcb traces, and switching power supplies
This comes in a different case, identical to the [[Noname_XL-LOGIC16-100M]].
* '''FPGA''': Markings ground off
* '''USB interface chip''': Markings ground off, but presumably a Cypress FX2 like all others. [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': Markings ground off
* '''3.3V voltage regulator''': Unrecognized switcher in sot23-5 (Seems to be 3.8V?!)
* '''1.5V voltage regulator''': Unrecognised switcher in sot23-5
* '''Crystal (FX2):''' 24.000MHz
* '''Crystal (FPGA):''' Looks like 32Mhz?
* '''FPGA Bitstream''' 25P10 1MBit SPI NOR flash, ST Microelectronics
* '''Bootstrap Controller''' Not required?
== Hardware (2014-01-25 variant) ==
PCB Marked "Saleae Logic 16 mcupro 2014.1.25"
* '''FPGA''': Markings ground off
* '''USB interface chip''': Markings ground off
* MISC, bottom two channels are not GND, but SCK(Sample Clock out) and HCK (Half of SCK out).

== Photos (Actel) ==

<gallery>
File:Mcupro_Logic16_case_top.jpeg|Device, top
File:Mcupro_Logic16_case_bottom.jpeg|Device, bottom
File:Mcupro_Logic16_top.jpeg|PCB, top
File:Mcupro_Logic16_bottom.jpeg|PCB, bottom
</gallery>

== Photos (Cyclone) ==

<gallery>
File:Mcupro_Logic16_case_top.jpeg|Device, top
File:Mcupro_Logic16_case_bottom.jpeg|Device, bottom
File:Mcupro Logic16 Variant2 top.jpg|PCB with Altera Cyclone, top
File:IMG 0207 v1.JPG|PCB with Altera Cyclone, bottom
File:Mcupro Logic16 Variant2 top flash+uC.jpg|PCB, top, 1MBit flash and STCMCU uC
</gallery>

== Photos (2015-01-08 variant) ==

<gallery>
File:Xl-logic16-100m-external.jpg|Device, top
File:Mcupro-2015-1-8-top-overview.jpg|PCB, top
File:Mcupro-2015-1-8-bottom-overview.jpg|PCB, bottom
</gallery>

== Photos (2014-01-25 variant) ==

<gallery>
File:Mcupro-2014-1-25-top-overview.jpg|PCB, top
File:Mcupro-2014-1-25-bottom-overview.jpg|PCB, bottom
</gallery>

== Protocol ==

See [[Saleae_Logic16#Protocol]].

== Firmware ==

;Actel variant
: This logic analyzer works with unmodified Saleae software. The Actel FPGA has on-chip flash storage, so it only requires an upload of Cypress FX2LP firmware in order to operate.
;Cyclone variant
: This logic analyzer works with unmodified Saleae software. The PCB contains a serial flash chip, so it only requires an upload of Cypress FX2LP firmware in order to operate.
;2015-1-8 variant
: Only requires an upload of Cypress FX2LP firmware to operate. Opensource binaries from [https://github.com/gregani/la16fw] work, but must be renamed to '''saleae-logic16-fx2.fw'''

The firmware extraction steps are identical to [[Saleae_Logic16#Firmware|steps for Saleae Logic16]], however you only need to have '''saleae-logic16-fx2.fw''' installed.

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

Mcupro Logic16 clone

2015-09-28T13:34:30Z

Sout: /* Hardware (2014-01-25 variant) */

{{DISPLAYTITLE:mcupro Logic16 clone}}
{{Infobox logic analyzer
| image = [[File:Mcupro_Logic16_overview.png|180px]]
| name = mcupro Logic16 clone
| status = supported
| source_code_dir = saleae-logic16
| channels = 3/6/9/16
| samplerate = 100/50/32/16MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.9V — 6V
| threshold = 1.5V (operates with 3.3V logic)
| memory = none
| compression = yes
| website = [http://www.aliexpress.com/store/product/USB-Logic-Analyzer-100M-max-sample-rate-16Channels-10B-samples-MCU-ARM-FPGA-debug-tool/614202_1916810169.html aliexpress.com]
}}

The '''mcupro Logic16 clone''' is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).

This is a clone of the [[Saleae Logic16]].

See [[mcupro Logic16 clone/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware (Actel variant) ==

* '''FPGA''': [https://www.actel.com/documents/PA3_DS.pdf Actel A3P125]
* '''USB interface chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc3256.pdf Atmel 24C02N]
* '''3.3V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-3.3]
* '''1.5V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-1.5]
* '''Crystal:''' 24.000MHz

== Hardware (Cylone variant) ==

* '''FPGA''': [https://www.altera.com/products/fpga/cyclone-series/cyclone/support.html#Cyclone-Device-Handbook--All-Sections- Altera Cyclone EP1C3T100]
* '''USB interface chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc3256.pdf Atmel 24C02N]
* '''3.3V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-3.3]
* '''1.5V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-1.5]
* '''Crystal (FX2):''' 24.000MHz
* '''Crystal (FPGA):''' 100.000MHz
* '''FPGA Bitstream''' 25P10 1MBit SPI NOR flash, ST Microelectronics
* '''Bootstrap Controller''' STCMCU 15F10, 8051 compatible

== Hardware (2015-01-08 variant) ==
PCB Marked "Saleae Logic 16 By MCUPro 2015-1-8" Readily identifiable by the irregular pcb traces, and switching power supplies
This comes in a different case, identical to the [[Noname_XL-LOGIC16-100M]].
* '''FPGA''': Markings ground off
* '''USB interface chip''': Markings ground off, but presumably a Cypress FX2 like all others. [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': Markings ground off
* '''3.3V voltage regulator''': Unrecognized switcher in sot23-5 (Seems to be 3.8V?!)
* '''1.5V voltage regulator''': Unrecognised switcher in sot23-5
* '''Crystal (FX2):''' 24.000MHz
* '''Crystal (FPGA):''' Looks like 32Mhz?
* '''FPGA Bitstream''' 25P10 1MBit SPI NOR flash, ST Microelectronics
* '''Bootstrap Controller''' Not required?
== Hardware (2014-01-25 variant) ==
PCB Marked "Saleae Logic 16 mcupro 2014.1.25"
* '''FPGA''': Markings ground off
* '''USB interface chip''': Markings ground off
* MISC, bottom two channels are not GND, buy SCK(Sample Clock out) and HCK (Half of SCK out).

== Photos (Actel) ==

<gallery>
File:Mcupro_Logic16_case_top.jpeg|Device, top
File:Mcupro_Logic16_case_bottom.jpeg|Device, bottom
File:Mcupro_Logic16_top.jpeg|PCB, top
File:Mcupro_Logic16_bottom.jpeg|PCB, bottom
</gallery>

== Photos (Cyclone) ==

<gallery>
File:Mcupro_Logic16_case_top.jpeg|Device, top
File:Mcupro_Logic16_case_bottom.jpeg|Device, bottom
File:Mcupro Logic16 Variant2 top.jpg|PCB with Altera Cyclone, top
File:IMG 0207 v1.JPG|PCB with Altera Cyclone, bottom
File:Mcupro Logic16 Variant2 top flash+uC.jpg|PCB, top, 1MBit flash and STCMCU uC
</gallery>

== Photos (2015-01-08 variant) ==

<gallery>
File:Xl-logic16-100m-external.jpg|Device, top
File:Mcupro-2015-1-8-top-overview.jpg|PCB, top
File:Mcupro-2015-1-8-bottom-overview.jpg|PCB, bottom
</gallery>

== Photos (2014-01-25 variant) ==

<gallery>
File:Mcupro-2014-1-25-top-overview.jpg|PCB, top
File:Mcupro-2014-1-25-bottom-overview.jpg|PCB, bottom
</gallery>

== Protocol ==

See [[Saleae_Logic16#Protocol]].

== Firmware ==

;Actel variant
: This logic analyzer works with unmodified Saleae software. The Actel FPGA has on-chip flash storage, so it only requires an upload of Cypress FX2LP firmware in order to operate.
;Cyclone variant
: This logic analyzer works with unmodified Saleae software. The PCB contains a serial flash chip, so it only requires an upload of Cypress FX2LP firmware in order to operate.
;2015-1-8 variant
: Only requires an upload of Cypress FX2LP firmware to operate. Opensource binaries from [https://github.com/gregani/la16fw] work, but must be renamed to '''saleae-logic16-fx2.fw'''

The firmware extraction steps are identical to [[Saleae_Logic16#Firmware|steps for Saleae Logic16]], however you only need to have '''saleae-logic16-fx2.fw''' installed.

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

Mcupro Logic16 clone

2015-09-28T13:19:20Z

Sout:

{{DISPLAYTITLE:mcupro Logic16 clone}}
{{Infobox logic analyzer
| image = [[File:Mcupro_Logic16_overview.png|180px]]
| name = mcupro Logic16 clone
| status = supported
| source_code_dir = saleae-logic16
| channels = 3/6/9/16
| samplerate = 100/50/32/16MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.9V — 6V
| threshold = 1.5V (operates with 3.3V logic)
| memory = none
| compression = yes
| website = [http://www.aliexpress.com/store/product/USB-Logic-Analyzer-100M-max-sample-rate-16Channels-10B-samples-MCU-ARM-FPGA-debug-tool/614202_1916810169.html aliexpress.com]
}}

The '''mcupro Logic16 clone''' is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).

This is a clone of the [[Saleae Logic16]].

See [[mcupro Logic16 clone/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware (Actel variant) ==

* '''FPGA''': [https://www.actel.com/documents/PA3_DS.pdf Actel A3P125]
* '''USB interface chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc3256.pdf Atmel 24C02N]
* '''3.3V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-3.3]
* '''1.5V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-1.5]
* '''Crystal:''' 24.000MHz

== Hardware (Cylone variant) ==

* '''FPGA''': [https://www.altera.com/products/fpga/cyclone-series/cyclone/support.html#Cyclone-Device-Handbook--All-Sections- Altera Cyclone EP1C3T100]
* '''USB interface chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc3256.pdf Atmel 24C02N]
* '''3.3V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-3.3]
* '''1.5V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-1.5]
* '''Crystal (FX2):''' 24.000MHz
* '''Crystal (FPGA):''' 100.000MHz
* '''FPGA Bitstream''' 25P10 1MBit SPI NOR flash, ST Microelectronics
* '''Bootstrap Controller''' STCMCU 15F10, 8051 compatible

== Hardware (2015-01-08 variant) ==
PCB Marked "Saleae Logic 16 By MCUPro 2015-1-8" Readily identifiable by the irregular pcb traces, and switching power supplies
This comes in a different case, identical to the [[Noname_XL-LOGIC16-100M]].
* '''FPGA''': Markings ground off
* '''USB interface chip''': Markings ground off, but presumably a Cypress FX2 like all others. [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': Markings ground off
* '''3.3V voltage regulator''': Unrecognized switcher in sot23-5 (Seems to be 3.8V?!)
* '''1.5V voltage regulator''': Unrecognised switcher in sot23-5
* '''Crystal (FX2):''' 24.000MHz
* '''Crystal (FPGA):''' Looks like 32Mhz?
* '''FPGA Bitstream''' 25P10 1MBit SPI NOR flash, ST Microelectronics
* '''Bootstrap Controller''' Not required?
== Hardware (2014-01-25 variant) ==
PCB Marked "Saleae Logic 16 mcupro 2014.1.25"
* '''FPGA''': Markings ground off
* '''USB interface chip''': Markings ground off
== Photos (Actel) ==

<gallery>
File:Mcupro_Logic16_case_top.jpeg|Device, top
File:Mcupro_Logic16_case_bottom.jpeg|Device, bottom
File:Mcupro_Logic16_top.jpeg|PCB, top
File:Mcupro_Logic16_bottom.jpeg|PCB, bottom
</gallery>

== Photos (Cyclone) ==

<gallery>
File:Mcupro_Logic16_case_top.jpeg|Device, top
File:Mcupro_Logic16_case_bottom.jpeg|Device, bottom
File:Mcupro Logic16 Variant2 top.jpg|PCB with Altera Cyclone, top
File:IMG 0207 v1.JPG|PCB with Altera Cyclone, bottom
File:Mcupro Logic16 Variant2 top flash+uC.jpg|PCB, top, 1MBit flash and STCMCU uC
</gallery>

== Photos (2015-01-08 variant) ==

<gallery>
File:Xl-logic16-100m-external.jpg|Device, top
File:Mcupro-2015-1-8-top-overview.jpg|PCB, top
File:Mcupro-2015-1-8-bottom-overview.jpg|PCB, bottom
</gallery>

== Photos (2014-01-25 variant) ==

<gallery>
File:Mcupro-2014-1-25-top-overview.jpg|PCB, top
File:Mcupro-2014-1-25-bottom-overview.jpg|PCB, bottom
</gallery>

== Protocol ==

See [[Saleae_Logic16#Protocol]].

== Firmware ==

;Actel variant
: This logic analyzer works with unmodified Saleae software. The Actel FPGA has on-chip flash storage, so it only requires an upload of Cypress FX2LP firmware in order to operate.
;Cyclone variant
: This logic analyzer works with unmodified Saleae software. The PCB contains a serial flash chip, so it only requires an upload of Cypress FX2LP firmware in order to operate.
;2015-1-8 variant
: Only requires an upload of Cypress FX2LP firmware to operate. Opensource binaries from [https://github.com/gregani/la16fw] work, but must be renamed to '''saleae-logic16-fx2.fw'''

The firmware extraction steps are identical to [[Saleae_Logic16#Firmware|steps for Saleae Logic16]], however you only need to have '''saleae-logic16-fx2.fw''' installed.

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

File:Mcupro-2014-1-25-bottom-overview.jpg

2015-09-28T13:17:57Z

Sout: Mcupro-2014-1-25-bottom-overview.jpg

== Summary ==
Mcupro-2014-1-25-bottom-overview.jpg
== Licensing ==
{{CC-BY-SA-3.0}}

File:Mcupro-2014-1-25-top-overview.jpg

2015-09-28T13:17:31Z

Sout:

== Licensing ==
{{CC-BY-SA-3.0}}

Mcupro Logic16 clone

2015-09-28T13:09:58Z

Sout:

{{DISPLAYTITLE:mcupro Logic16 clone}}
{{Infobox logic analyzer
| image = [[File:Mcupro_Logic16_overview.png|180px]]
| name = mcupro Logic16 clone
| status = supported
| source_code_dir = saleae-logic16
| channels = 3/6/9/16
| samplerate = 100/50/32/16MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.9V — 6V
| threshold = 1.5V (operates with 3.3V logic)
| memory = none
| compression = yes
| website = [http://www.aliexpress.com/store/product/USB-Logic-Analyzer-100M-max-sample-rate-16Channels-10B-samples-MCU-ARM-FPGA-debug-tool/614202_1916810169.html aliexpress.com]
}}

The '''mcupro Logic16 clone''' is a USB-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels).

This is a clone of the [[Saleae Logic16]].

See [[mcupro Logic16 clone/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware (Actel variant) ==

* '''FPGA''': [https://www.actel.com/documents/PA3_DS.pdf Actel A3P125]
* '''USB interface chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc3256.pdf Atmel 24C02N]
* '''3.3V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-3.3]
* '''1.5V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-1.5]
* '''Crystal:''' 24.000MHz

== Hardware (Cylone variant) ==

* '''FPGA''': [https://www.altera.com/products/fpga/cyclone-series/cyclone/support.html#Cyclone-Device-Handbook--All-Sections- Altera Cyclone EP1C3T100]
* '''USB interface chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc3256.pdf Atmel 24C02N]
* '''3.3V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-3.3]
* '''1.5V voltage regulator''': [http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf Advanced Monolithic Systems AMS1117-1.5]
* '''Crystal (FX2):''' 24.000MHz
* '''Crystal (FPGA):''' 100.000MHz
* '''FPGA Bitstream''' 25P10 1MBit SPI NOR flash, ST Microelectronics
* '''Bootstrap Controller''' STCMCU 15F10, 8051 compatible

== Hardware (2015-01-08 variant) ==
PCB Marked "Saleae Logic 16 By MCUPro 2015-1-8" Readily identifiable by the irregular pcb traces, and switching power supplies
This comes in a different case, identical to the [[Noname_XL-LOGIC16-100M]].
* '''FPGA''': Markings ground off
* '''USB interface chip''': Markings ground off, but presumably a Cypress FX2 like all others. [http://www.cypress.com/?docID=45142 Cypress CY7C68013A]
* '''I2C EEPROM''': Markings ground off
* '''3.3V voltage regulator''': Unrecognized switcher in sot23-5 (Seems to be 3.8V?!)
* '''1.5V voltage regulator''': Unrecognised switcher in sot23-5
* '''Crystal (FX2):''' 24.000MHz
* '''Crystal (FPGA):''' Looks like 32Mhz?
* '''FPGA Bitstream''' 25P10 1MBit SPI NOR flash, ST Microelectronics
* '''Bootstrap Controller''' Not required?
== Hardware (2014-01-25 variant) ==
PCB Marked "Saleae Logic 16 mcupro 2014.1.25"
* '''FPGA''': Markings ground off
* '''USB interface chip''': Markings ground off
== Photos (Actel) ==

<gallery>
File:Mcupro_Logic16_case_top.jpeg|Device, top
File:Mcupro_Logic16_case_bottom.jpeg|Device, bottom
File:Mcupro_Logic16_top.jpeg|PCB, top
File:Mcupro_Logic16_bottom.jpeg|PCB, bottom
</gallery>

== Photos (Cyclone) ==

<gallery>
File:Mcupro_Logic16_case_top.jpeg|Device, top
File:Mcupro_Logic16_case_bottom.jpeg|Device, bottom
File:Mcupro Logic16 Variant2 top.jpg|PCB with Altera Cyclone, top
File:IMG 0207 v1.JPG|PCB with Altera Cyclone, bottom
File:Mcupro Logic16 Variant2 top flash+uC.jpg|PCB, top, 1MBit flash and STCMCU uC
</gallery>

== Photos (2015-01-08 variant) ==

<gallery>
File:Xl-logic16-100m-external.jpg|Device, top
File:Mcupro-2015-1-8-top-overview.jpg|PCB, top
File:Mcupro-2015-1-8-bottom-overview.jpg|PCB, bottom
</gallery>

== Protocol ==

See [[Saleae_Logic16#Protocol]].

== Firmware ==

;Actel variant
: This logic analyzer works with unmodified Saleae software. The Actel FPGA has on-chip flash storage, so it only requires an upload of Cypress FX2LP firmware in order to operate.
;Cyclone variant
: This logic analyzer works with unmodified Saleae software. The PCB contains a serial flash chip, so it only requires an upload of Cypress FX2LP firmware in order to operate.
;2015-1-8 variant
: Only requires an upload of Cypress FX2LP firmware to operate. Opensource binaries from [https://github.com/gregani/la16fw] work, but must be renamed to '''saleae-logic16-fx2.fw'''

The firmware extraction steps are identical to [[Saleae_Logic16#Firmware|steps for Saleae Logic16]], however you only need to have '''saleae-logic16-fx2.fw''' installed.

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]