sigrok - User contributions [en]

128axc-based USBee AX-Pro clone

2026-02-10T14:43:29Z

Orzel:

{{Infobox logic analyzer
| image = [[File:128axc-usbee-axpro-clone-Overview.jpg|180px]]
| name = 128axc-based USBee AX-Pro clone
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| samplerate = 24MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.5V — 5.25V (absolute max rating)
| threshold = Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
| memory = none
| compression = none
| website = none
}}

The '''128axc-based USBee AX-Pro clone''' is a USB-based logic analyzer with 8-channel and up to 24MHz sample-rate.

It is yet another Cypress FX2 based logic analyzer. This one reports on USB as 08a9:0014 which is [[CWAV USBee AX-Pro]], but contrary to the original (or other clones such as [[HT_USBee-AxPro]]), it has no Analog input.

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

See [[128axc-based USBee AX-Pro clone/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

* '''Main chip''': [http://www.cypress.com/part/cy7c68013a-128axc Cypress CY7C68013A-128AXC (FX2)]
* '''Input buffer''': NXP HC245
* '''2kByte I²C EEPROM''': Atmel A24C02BN
* '''Voltage regulator''': AMS 117
* '''24MHz crystal''': RJH24.000
* No DAC is present, no Analog entry possible.

== Photos ==

<gallery>
File:128axc-usbee-axpro-clone-Front.jpg|PCB, top
File:128axc-usbee-axpro-clone-Back-cypress.jpg|PCB, bottom, CY7C68013A-128AXC
File:128axc-usbee-axpro-clone-Nxp-input-buffer.jpg|NXP HC245 Input Buffer
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

128axc-based USBee AX-Pro clone

2026-02-10T14:43:09Z

Orzel: remove dead link

{{Infobox logic analyzer
| image = [[File:128axc-usbee-axpro-clone-Overview.jpg|180px]]
| name = 128axc-based USBee AX-Pro clone
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| samplerate = 24MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.5V — 5.25V (absolute max rating)
| threshold = Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
| memory = none
| compression = none
| website = none
}}

The '''128axc-based USBee AX-Pro clone''' is a USB-based logic analyzer with 8-channel and up to 24MHz sample-rate.

It is yet another Cypress FX2 based logic analyzer. This one reports on USB as 08a9:0014 which is [[CWAV USBee AX-Pro]], but contrary to the original (or other clones such as [[HT_USBee-AxPro]]), it has no Analog input.

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

See [[128axc-based USBee AX-Pro clone/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

* '''Main chip''': [http://www.cypress.com/part/cy7c68013a-128axc Cypress CY7C68013A-128AXC (FX2)]
* '''Input buffer''': NXP HC245
* '''2kByte I²C EEPROM''': Atmel A24C02BN
* '''Voltage regulator''': AMS 117
* '''24MHz crystal''': RJH24.000
* No DAC is present, no Analog entry possible.

== Photos ==

<gallery>
File:128axc-usbee-axpro-clone-Front.jpg|PCB, top
File:128axc-usbee-axpro-clone-Back-cypress.jpg|PCB, bottom, CY7C68013A-128AXC
File:128axc-usbee-axpro-clone-Nxp-input-buffer.jpg|NXP HC245 Input Buffer
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

128axc-based USBee AX-Pro clone

2018-12-14T15:07:49Z

Orzel:

{{Infobox logic analyzer
| image = [[File:128axc-usbee-axpro-clone-Overview.jpg|180px]]
| name = 128axc-based USBee AX-Pro clone
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| samplerate = 24MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.5V — 5.25V (absolute max rating)
| threshold = Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
| memory = none
| compression = none
| website = none
}}

The '''128axc-based USBee AX-Pro clone''' is a USB-based logic analyzer with 8-channel and up to 24MHz sample-rate.

It is yet another Cypress FX2 based logic analyzer. This one reports on USB as 08a9:0014 which is [[CWAV USBee AX-Pro]], but contrary to the original (or other clones such as [[HT_USBee-AxPro]]), it has no Analog input.

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

See [[128axc-based USBee AX-Pro clone/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

* '''Main chip''': [http://www.cypress.com/part/cy7c68013a-128axc Cypress CY7C68013A-128AXC (FX2)]
* '''Input buffer''': NXP HC245
* '''2kByte I²C EEPROM''': Atmel A24C02BN
* '''Voltage regulator''': AMS 117
* '''24MHz crystal''': RJH24.000
* No DAC is present, no Analog entry possible.

== Photos ==

<gallery>
File:128axc-usbee-axpro-clone-Front.jpg|PCB, top
File:128axc-usbee-axpro-clone-Back-cypress.jpg|PCB, bottom, CY7C68013A-128AXC
File:128axc-usbee-axpro-clone-Nxp-input-buffer.jpg|NXP HC245 Input Buffer
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

* [https://www.banggood.com/USB-Logic-Analyzer-24M-8CH-Microcontroller-ARM-FPGA-Debug-Tool-p-1177821.html Banggood seller]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

Lcsoft Mini Board

2018-12-14T14:58:35Z

Orzel:

{{Infobox logic analyzer
| image = [[File:lcsoft-miniboard-front.png|180px]]
| name = Lcsoft Mini Board
| status = supported
| source_code_dir = fx2lafw
| channels = 8/16
| samplerate = 24MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.5V — 5.25V
| threshold = Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
| memory = none
| compression = none
| website = [http://www.lctech-inc.com/Hardware/Detail.aspx?id=7cadef7b-359a-4e3d-b980-76ffa15171e0 lctech-inc.com], [http://www.geeetech.com/wiki/index.php/CY7C68013 geeetech.com]
}}

The '''Lcsoft CY7C68013A Mini Board''' is a Cypress FX2(LP) eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.

It is a clone of the [[Saleae Logic]].

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

See [[Lcsoft Mini Board/Info]] for some more details (such as '''lsusb -v''' output) on the device.

There is a very similar board made by Geeetech, it has near-identical components but a slightly different layout.

== Hardware ==

* '''Main chip''': Cypress CY7C68013A-56PVXC (FX2LP)
* '''3.3V voltage regulator''': Advanced Monolithic Systems AMS1117-3.3
* '''16kB I2C EEPROM''': Atmel AT24C128A
* '''24MHz crystal''': JY24.0000601

All the pins on the FX2(LP) are broken out to 40 header pins. There's an on/off toggle switch, a reset button, and a jumper that lets you select whether the FX2LP gets its configuration from a small EEPROM, or boots into the default mode. The EEPROM is usually provided programmed such that it enumerates with the same VID:PID as a [[Saleae Logic]].

By default the chip will boot in some internal bootloader which allows loading (and executing) from USB to the internal RAM. Sigrok will typically use the [[fx2lafw]] firmware for this (aka "load-on-probe").

The EEPROM can be programmed with a firmware. The jumper allows to select whether the chip will boot on the EEPROM or the usual load-on-probe. This can be used for example to switch easily between a 16-channel (PB0-PB7, PD0-PD7) firmware and a 8-channel (PB0-PB7) one.

The Cypress has no DAC and can't by itself have any analog output. Other Cypress-based board have an external DAC, typically connected to 8 pins of the FX2, but this very one doesn't have any DAC.

== Photos ==

<gallery>
File:lcsoft-miniboard-front.png|PCB, front
File:lcsoft-fx2-pcb-top.png|PCB, front
File:lcsoft-miniboard-back.png|PCB, back
File:Lcsoft mini board ams1117.jpg|A.M.S. AMS1117
File:Lcsoft mini board at24c128a.jpg|Atmel AT24C128A
File:Lcsoft mini board crystal.jpg|24MHz crystal
File:Lcsoft mini board fx2.jpg|Cypress FX2LP
</gallery>

'''Geeetech version''':

[http://www.geeetech.com/wiki/index.php/CY7C68013 Geeetech product page]

<gallery>
File:Geeetech_CY7C68013.jpg|Geeetech CY7C68013, front
File:Geeetech_CY7C68013_back.jpg|Geeetech CY7C68013, back
</gallery>

Differences from the LCSoft board:
* two LEDs, on pins PA0 and PA1
* two jumpers: J1 connects/disconnects the LEDs from Vcc, J2 sets the EEPROM address bit A0
* construction quality is higher

The Geeetech board's J2 is logically opposite to the LCSoft board's jumper: pin A0 is tied HIGH via a 10kOhm resistor, inserting J2 pulls it LOW. i.e. inserting J2 on the Geeetech is functionally the same as removing the jumper on the LCSoft board.

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Possible issues ==

* With some kernel versions, and if the onboard EEPROM is disconnected (the jumper not connected) the kernel will automatically claim the device with a '''usbtest''' kernel module, seen in dmesg like '''usbtest 2-2:1.0: FX2 device''' — if this happens, sigrok will be unable to claim the device. Remove the '''usbtest''' kernel module as root to be able to use it:

$ '''sudo rmmod usbtest'''

You can add the '''usbtest''' module to a module blacklist permanently, at least in Debian-based distributions found in '''/etc/modprobe.d/blacklist.conf''':

$ '''sudo sh -c "echo 'blacklist usbtest' >> /etc/modprobe.d/blacklist.conf"'''

== Required testing hardware extensions ==

'''Do not directly hook the board pins to another circuit, if you don't know what you are doing! This could damage the board!'''

The simplest circuit would be adding at least resistors in between your circuit-in-test and the Lcsoft board, but be aware here that the Cypress FX2(LP) chip can only tolerate a maximum of 5V I/O. Better would be to use a clamp circuit like shown at [http://web.archive.org/web/20140604115345/http://sunbizhosting.co.uk/~spiral/blog/?p=117 Spiralbrain's Blog] (but you do not need to add another EEPROM for sigrok with [[fx2lafw]]!). A buffer circuit using a 74HC241 IC for protection is also possible. Check the [[fx2lafw]] page to see which protection circuits are used on other logic analyzer boards.

More information can be found in [[Circuits for barebone boards]].

== Resources ==

* [http://web.archive.org/web/20140604115345/http://sunbizhosting.co.uk/~spiral/blog/?p=117 Spiralbrain's blog: So your Saleae clone isn’t working with the new software?]
* [http://hanixdiy.blogspot.de/2011/03/cy7c68013a-usb-logic-analyzer.html hAnix-diy: CY7C68013A USB Logic Analyzer]
* [http://www.triplespark.net/elec/periph/USB-FX2/eeprom/ Instructions for flashing the EEPROM on FX2 devices]
* [http://www.triplespark.net/elec/periph/USB-FX2/eeprom/fxload-full-2008_10_13-ww3.tar.gz Second stage bootloader, Vend_Ax.hex]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

128axc-based USBee AX-Pro clone

2018-11-23T23:25:15Z

Orzel:

{{Infobox logic analyzer
| image = [[File:128axc-usbee-axpro-clone-Overview.jpg|180px]]
| name = 128axc-based USBee AX-Pro clone
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| samplerate = 24MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.5V — 5.25V (absolute max rating)
| threshold = Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
| memory = none
| compression = none
| website = none
}}

The '''128axc-based USBee AX-Pro clone''' is a USB-based logic analyzer with 8-channel and up to 24MHz sample-rate.

It is yet another clone of the [[CWAV USBee AX-Pro]].

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

See [[128axc-based USBee AX-Pro clone/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

* '''Main chip''': [http://www.cypress.com/part/cy7c68013a-128axc Cypress CY7C68013A-128AXC (FX2)]
* '''Input buffer''': NXP HC245
* '''2kByte I²C EEPROM''': Atmel A24C02BN (actually TWI interface)
* '''Voltage regulator''': AMS 117
* '''24MHz crystal''': RJH24.000

== Photos ==

<gallery>
File:128axc-usbee-axpro-clone-Front.jpg|PCB, top
File:128axc-usbee-axpro-clone-Back-cypress.jpg|PCB, bottom, CY7C68013A-128AXC
File:128axc-usbee-axpro-clone-Nxp-input-buffer.jpg|NXP HC245 Input Buffer
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

* [https://www.banggood.com/USB-Logic-Analyzer-24M-8CH-Microcontroller-ARM-FPGA-Debug-Tool-p-1177821.html Banggood seller]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

File:128axc-usbee-axpro-clone-Overview.jpg

2018-11-23T23:24:35Z

Orzel: Orzel moved page File:128axc-saleae-logic-clone-Overview.jpg to File:128axc-usbee-axpro-clone-Overview.jpg

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Front.jpg

2018-11-23T23:24:33Z

Orzel: Orzel moved page File:128axc-saleae-logic-clone-Front.jpg to File:128axc-usbee-axpro-clone-Front.jpg

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Back-cypress.jpg

2018-11-23T23:24:30Z

Orzel: Orzel moved page File:128axc-saleae-logic-clone-Back-cypress.jpg to File:128axc-usbee-axpro-clone-Back-cypress.jpg

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Nxp-input-buffer.jpg

2018-11-23T23:24:27Z

Orzel: Orzel moved page File:128axc-saleae-logic-clone-Nxp-input-buffer.jpg to File:128axc-usbee-axpro-clone-Nxp-input-buffer.jpg

== Licensing ==
{{CC-BY-SA-3.0}}

128axc-based USBee AX-Pro clone

2018-11-23T23:18:32Z

Orzel: Orzel moved page 128axc-based Saleae Logic clone to 128axc-based USBee AX-Pro clone

{{Infobox logic analyzer
| image = [[File:128axc-saleae-logic-clone-Overview.jpg|180px]]
| name = 128axc-based Saleae Logic clone
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| samplerate = 24MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -0.5V — 5.25V (absolute max rating)
| threshold = Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
| memory = none
| compression = none
| website = none
}}

The '''128axc-based Saleae Logic clone''' is a USB-based logic analyzer with 8-channel and up to 24MHz sample-rate.

It is yet another clone of the [[Saleae Logic]].

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

See [[128axc-based Saleae Logic clone/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

* '''Main chip''': [http://www.cypress.com/part/cy7c68013a-128axc Cypress CY7C68013A-128AXC (FX2)]
* '''Input buffer''': NXP HC245
* '''2kByte I²C EEPROM''': Atmel A24C02BN (actually TWI interface)
* '''Voltage regulator''': AMS 117
* '''24MHz crystal''': RJH24.000

== Photos ==

<gallery>
File:128axc-saleae-logic-clone-Front.jpg|PCB, top
File:128axc-saleae-logic-clone-Back-cypress.jpg|PCB, bottom, CY7C68013A-128AXC
File:128axc-saleae-logic-clone-Nxp-input-buffer.jpg|NXP HC245 Input Buffer
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

* [https://www.banggood.com/USB-Logic-Analyzer-24M-8CH-Microcontroller-ARM-FPGA-Debug-Tool-p-1177821.html Banggood seller]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

128axc-based USBee AX-Pro clone/Info

2018-11-23T23:17:56Z

Orzel: Orzel moved page 128axc-based Saleae Logic clone/Info to 128axc-based USBee AX-Pro clone/Info

== lsusb (before firmware upload) ==

<code>
% lsusb -d 08a9:0014 -v

Bus 001 Device 114: ID 08a9:0014 CWAV Inc. USBee AX-Pro
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x08a9 CWAV Inc.
idProduct 0x0014 USBee AX-Pro
bcdDevice 1b.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x00ab
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)
</code>

128axc-based USBee AX-Pro clone/Info

2018-11-23T23:12:57Z

Orzel: Created page with " == lsusb (before firmware upload) == <code> % lsusb -d 08a9:0014 -v Bus 001 Device 114: ID 08a9:0014 CWAV Inc. USBee AX-Pro Device Descriptor: bLength 18..."

128axc-based USBee AX-Pro clone

2018-11-23T23:00:58Z

Orzel: Created page with "{{Infobox logic analyzer | image = 180px | name = 128axc-based Saleae Logic clone | status = s..."

File:128axc-usbee-axpro-clone-Back-cypress.jpg

2018-11-23T22:48:04Z

Orzel: Orzel moved page File:Back-cypress.jpg to File:128axc-saleae-logic-clone-Back-cypress.jpg

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Nxp-input-buffer.jpg

2018-11-23T22:48:02Z

Orzel: Orzel moved page File:Nxp-input-buffer.jpg to File:128axc-saleae-logic-clone-Nxp-input-buffer.jpg

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Front.jpg

2018-11-23T22:47:52Z

Orzel: Orzel moved page File:Front.jpg to File:128axc-saleae-logic-clone-Front.jpg

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Overview.jpg

2018-11-23T22:47:43Z

Orzel: Orzel moved page File:Overview.jpg to File:128axc-saleae-logic-clone-Overview.jpg

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Nxp-input-buffer.jpg

2018-11-23T22:01:24Z

Orzel:

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Back-cypress.jpg

2018-11-23T22:00:43Z

Orzel:

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Front.jpg

2018-11-23T22:00:26Z

Orzel:

== Licensing ==
{{CC-BY-SA-3.0}}

File:128axc-usbee-axpro-clone-Overview.jpg

2018-11-23T21:59:46Z

Orzel:

== Licensing ==
{{CC-BY-SA-3.0}}