sigrok - User contributions [en]

ARMFLY AX-Pro

2014-11-09T00:29:09Z

Nihilist: /* Hardware */ +ADC, op amps

{{Infobox logic analyzer
| image = [[File:Armfly_ax_pro.png|180px]]
| name = ARMFLY AX-Pro
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| samplerate = 24MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = max. 5.0V
| threshold = Fixed: VIH=1.4V, VIL=0.8V
| memory = none
| compression = none
| website = [http://www.armfly.com/product/AX-Pro/ax-pro.htm armfly.com]
}}

The '''ARMFLY AX-Pro''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the [[CWAV USBee AX-Pro]]. There is an "[http://item.taobao.com/item.htm?id=12503749579 RS232 RS485 RS422 CAN converter]" add-on board which also has a BNC connector for analog support.

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

'''Note''': Only the logic analyzer functionality is supported so far, analog support is work in progress.

See [[ARMFLY AX-Pro/Info]] for some more details (such as '''lsusb -vvv''' output) on the device.

== Hardware ==

* '''Main chip''': Cypress CY7C68013A-56LTXC (FX2LP)
* '''I2C EEPROM''': Atmel ATML920 24C02N SU27 D
* '''Low-dropout voltage regulator''': Advanced Monolithic Systems AMS1117-3.3
* '''Crystal''': 24MHz
* '''ADC''': Texas Instrument TLC5510IPW, 8-Bit, 20 MS/s ADC Single Channel
* '''OpAmp''': Texas Instrument LMV358 Dual Low-Voltage Rail-to-Rail Output Operational Amplifier
* '''OpAmp''': Analog Devices AD8065 (SMD marking "HRA")
* '''Multiplexor''': (I do not see it. Is it U5?)
* ...

== Photos ==

<gallery>
File:AX-Pro.JPG|AX-Pro
File:AX-Pro-Cables.JPG|Cables
File:AX-Pro-PCB.JPG|PCB, front
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

* [http://item.taobao.com/item.htm?id=13494320163 ARMFLY Taobao shop] ([http://translate.google.com/translate?sl=zh-CN&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwww.armfly.com%2Fproduct%2FAX-Pro%2Fax-pro.htm&act=url English translation])
* [http://item.taobao.com/item.htm?id=12503749579 ARMFLY AX-Pro RS232 RS485 RS422 CAN converter] ([http://translate.google.com/translate?hl=en&sl=zh-CN&tl=en&u=http%3A%2F%2Fitem.taobao.com%2Fitem.htm%3Fid%3D12503749579 English translation])

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:Supported]]

Sysclk AX-Pro

2014-11-09T00:17:55Z

Nihilist: Undo revision 10125 by Nihilist (talk) this should go to XZL_Studio_AX

{{Infobox logic analyzer
| image = [[File:Sysclk ax pro mugshot.png|180px]]
| name = Sysclk AX-Pro
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| analog channels = 2
| samplerate = 24MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = Digital: -1V — +6V Analog: ±10V (±20V max)
| threshold = Fixed: VIH=1.6V, VIL=1.4V
| memory = none
| compression = none
| website = [http://sysclk.taobao.com/ sysclk.taobao.com]
}}

The '''Sysclk AX-Pro''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the [[CWAV USBee AX-Pro]].

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

'''Note''': Only the logic analyzer functionality is supported so far, analog support is work in progress.

See [[Sysclk AX-Pro/Info]] for some more details (such as '''lsusb -v''' output) on the device.

== Hardware ==

* '''Main chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A-56LTXC (FX2LP)]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc0180.pdf‎ Atmel ATML125 24C02N SU27 D]
* '''Auxiliary 8051 chip''': [http://www.stcmcu.com/datasheet/stc/STC-AD-PDF/STC15F204EA-series-english.pdf STC STC15F104E] (purpose is unknown)
* '''Supply voltage regulator''': Advanced Monolithic Systems AMS1117-3.3
* '''Reference voltage regulator''': Advanced Monolithic Systems AMS1117-2.851218
* '''Analog-to-Digital converter''': [http://www.ti.com/lit/ds/symlink/tlc5510.pdf Texas Instruments TLC5510I]
* '''Analog input amplifiers''': [http://www.analog.com/static/imported-files/data_sheets/AD8065_8066.pdf Analog Devices AD8065] (SMD marking "HRA")
* '''Analog amplifiers negative supply''': [http://www.ti.com/lit/ds/symlink/lmc7660.pdf Texas Instruments LMC7660]
* '''Some operational amplifiers''': [http://www.ti.com/lit/ds/symlink/lm158-n.pdf Texas Instruments LM358]
* '''Analog channel switching relay''': TQ2-2V
* '''Crystal''': 24MHz
* ...

The analog channels are multiplexed by relay or solid-state IC to one ADC.

=== FX2LP pin mappings ===

{| border="0" style="font-size: smaller;" class="alternategrey sigroktable"
|-
! # !! Pin !! Destination !! Remark
|-
| 01 || RDY0/SLRD || TRIG || socket pin
|-
| 13 || IFCLK || GND || grounded
|-
| 18..25 || PB0..7 || DCH0..7 || digital input
|-
| 30 || CTL1/FLAGB || CLK || socket pin
|-
| 31 || CTL2/FLAGC || ADC_CLK || ADC clock input
|-
| 33 || PA0 || relay || multiplexing ACH1/ACH2
|-
| 35 || PA2 || DCH1 GND || can be isolated from GND and act as aux socket pin
|-
| 36 || PA3 || DCH2 GND || can be isolated from GND and act as aux socket pin
|-
| 38 || PA5 || STC_P3.1 || aux 8051 chip
|-
| 39 || PA6 || STC_P3.3 || aux 8051 chip
|-
| 42 || RESET# || STC_P3.2 || aux 8051 chip
|-
| 44 || WAKEUP || NC || not connected
|-
| 45..52 || PD0..7 || ADC_D1..8 || ADC data output
|}

== Photos ==

<gallery>
File:SysCLK_AX_Pro_box.jpg|Sysclk AX-Pro
File:SysCLK_AX_Pro_top.jpg|PCB, top
File:SysCLK_AX_Pro_bottom.jpg|PCB, bottom
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

* [http://sysclk.taobao.com/ Sysclk Taobao shop] ([http://translate.google.com/translate?sl=zh-CN&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http://sysclk.taobao.com/&act=url English translation])

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:Supported]]

XZL Studio AX

2014-11-09T00:17:16Z

Nihilist: /* Resources */ + similarity to EE Electronics ESLA201A

{{DISPLAYTITLE:XZL_Studio AX}}
{{Infobox logic analyzer
| image = [[File:Xzl studio ax mugshot.png|180px]]
| name = XZL_Studio AX
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| samplerate = 24MHz
| samplerate_state = —
| triggers = 1 independent trigger + (SW-probe 0,1)
| voltages = Digital: max. 5.5V Analog: -10V — +10V
| threshold = Digital: Fixed: VIH=1.4V, VIL=0.8V
| memory = none
| compression = none
| website = [http://www.hotmcu.com/xzl-ax-oscilloscope-and-logic-analyzer-ax-pro-logic-analyzer-p-14.html?cPath=3_26 hotmcu.com]
}}

The '''XZL_Studio AX''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the [[CWAV USBee AX-Pro]].

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

'''Note''': Only the logic analyzer functionality is supported so far, analog support is work in progress, as is the independent trigger.

See [[XZL_Studio AX/Info]] for some more details (such as '''lsusb -v''' output) on the device.

== Hardware ==

* '''Main chip''': Cypress CY7C68013A-56LTXC (FX2LP), U6
* '''ADC''': 1x Texas Instruments TLC5510I (SO 24pin package), 8-Bit, 20 MSPS ADC, Single Channel, U10, outputs D1-D8 connected to PD0-PD7, OE# grounded, CLOCK from CTL2 on U6
* '''I2C EEPROM''': Atmel 24C02C
* '''Low-dropout voltage regulator''': Advanced Monolithic Systems AMS1117-3.3
* '''Crystal''': 24MHz
* '''Multiplexer''': HCF4051 - Single 8-Channel Analog Multiplexer/Demultiplexer, U12, channel selectors B and C grounded, selector A controlled by PA0 on U6
* '''Op Amp''': LM358 - Single Supply Dual Operational Amplifiers, U15
* ...

== Photos ==

<gallery>
File:Studio XZL AX.jpeg|Device, front
File:Studio XZL AX Probe Port.jpeg|Probe port
File:Studio XZL AX USB.jpeg|USB port
File:Studio XZL AX.back.jpg|Device, back
File:Studio XZL AX PCB.jpeg|PCB, top
File:Studio XZL AX PCB underside.jpeg|PCB, bottom
File:Studio XZL AX clips.jpeg|Probe clips
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

* [[EE Electronics ESLA201A]] - the same circuit (from firmware's point of view). PCB has been copied and altered, same silkscreen labels. No electrolytic caps, no resistive trimmers, larger screw-hole-keepouts, no cap on pin 13 at U10, no U13 (second MAX1044/ICL7660). Has extra button inside the box!

TODO.

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:Supported]]

Sysclk AX-Pro

2014-11-09T00:07:42Z

Nihilist: /* Resources */ + similarity to EE Electronics ESLA201A

{{Infobox logic analyzer
| image = [[File:Sysclk ax pro mugshot.png|180px]]
| name = Sysclk AX-Pro
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| analog channels = 2
| samplerate = 24MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = Digital: -1V — +6V Analog: ±10V (±20V max)
| threshold = Fixed: VIH=1.6V, VIL=1.4V
| memory = none
| compression = none
| website = [http://sysclk.taobao.com/ sysclk.taobao.com]
}}

The '''Sysclk AX-Pro''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the [[CWAV USBee AX-Pro]].

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

'''Note''': Only the logic analyzer functionality is supported so far, analog support is work in progress.

See [[Sysclk AX-Pro/Info]] for some more details (such as '''lsusb -v''' output) on the device.

== Hardware ==

* '''Main chip''': [http://www.cypress.com/?docID=45142 Cypress CY7C68013A-56LTXC (FX2LP)]
* '''I2C EEPROM''': [http://www.atmel.com/Images/doc0180.pdf‎ Atmel ATML125 24C02N SU27 D]
* '''Auxiliary 8051 chip''': [http://www.stcmcu.com/datasheet/stc/STC-AD-PDF/STC15F204EA-series-english.pdf STC STC15F104E] (purpose is unknown)
* '''Supply voltage regulator''': Advanced Monolithic Systems AMS1117-3.3
* '''Reference voltage regulator''': Advanced Monolithic Systems AMS1117-2.851218
* '''Analog-to-Digital converter''': [http://www.ti.com/lit/ds/symlink/tlc5510.pdf Texas Instruments TLC5510I]
* '''Analog input amplifiers''': [http://www.analog.com/static/imported-files/data_sheets/AD8065_8066.pdf Analog Devices AD8065] (SMD marking "HRA")
* '''Analog amplifiers negative supply''': [http://www.ti.com/lit/ds/symlink/lmc7660.pdf Texas Instruments LMC7660]
* '''Some operational amplifiers''': [http://www.ti.com/lit/ds/symlink/lm158-n.pdf Texas Instruments LM358]
* '''Analog channel switching relay''': TQ2-2V
* '''Crystal''': 24MHz
* ...

The analog channels are multiplexed by relay or solid-state IC to one ADC.

=== FX2LP pin mappings ===

{| border="0" style="font-size: smaller;" class="alternategrey sigroktable"
|-
! # !! Pin !! Destination !! Remark
|-
| 01 || RDY0/SLRD || TRIG || socket pin
|-
| 13 || IFCLK || GND || grounded
|-
| 18..25 || PB0..7 || DCH0..7 || digital input
|-
| 30 || CTL1/FLAGB || CLK || socket pin
|-
| 31 || CTL2/FLAGC || ADC_CLK || ADC clock input
|-
| 33 || PA0 || relay || multiplexing ACH1/ACH2
|-
| 35 || PA2 || DCH1 GND || can be isolated from GND and act as aux socket pin
|-
| 36 || PA3 || DCH2 GND || can be isolated from GND and act as aux socket pin
|-
| 38 || PA5 || STC_P3.1 || aux 8051 chip
|-
| 39 || PA6 || STC_P3.3 || aux 8051 chip
|-
| 42 || RESET# || STC_P3.2 || aux 8051 chip
|-
| 44 || WAKEUP || NC || not connected
|-
| 45..52 || PD0..7 || ADC_D1..8 || ADC data output
|}

== Photos ==

<gallery>
File:SysCLK_AX_Pro_box.jpg|Sysclk AX-Pro
File:SysCLK_AX_Pro_top.jpg|PCB, top
File:SysCLK_AX_Pro_bottom.jpg|PCB, bottom
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

* [http://sysclk.taobao.com/ Sysclk Taobao shop] ([http://translate.google.com/translate?sl=zh-CN&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http://sysclk.taobao.com/&act=url English translation])
* [[EE Electronics ESLA201A]] - the same circuit (from firmware's point of view). PCB has been copied and altered, same silkscreen labels. No electrolytic caps, no resistive trimmers, larger screw-hole-keepouts, no cap on pin 13 at U10, no U13 (second MAX1044/ICL7660). Has extra button inside the box!

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:Supported]]

Sysclk AX-Pro

2014-11-08T22:34:41Z

Nihilist: /* Hardware */ + smt code

XZL Studio AX

2014-11-08T15:53:22Z

Nihilist: /* Hardware */ +how to control the analog part

{{DISPLAYTITLE:XZL_Studio AX}}
{{Infobox logic analyzer
| image = [[File:Xzl studio ax mugshot.png|180px]]
| name = XZL_Studio AX
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| samplerate = 24MHz
| samplerate_state = —
| triggers = 1 independent trigger + (SW-probe 0,1)
| voltages = Digital: max. 5.5V Analog: -10V — +10V
| threshold = Digital: Fixed: VIH=1.4V, VIL=0.8V
| memory = none
| compression = none
| website = [http://www.hotmcu.com/xzl-ax-oscilloscope-and-logic-analyzer-ax-pro-logic-analyzer-p-14.html?cPath=3_26 hotmcu.com]
}}

The '''XZL_Studio AX''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the [[CWAV USBee AX-Pro]].

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

'''Note''': Only the logic analyzer functionality is supported so far, analog support is work in progress, as is the independent trigger.

See [[XZL_Studio AX/Info]] for some more details (such as '''lsusb -v''' output) on the device.

== Hardware ==

* '''Main chip''': Cypress CY7C68013A-56LTXC (FX2LP), U6
* '''ADC''': 1x Texas Instruments TLC5510I (SO 24pin package), 8-Bit, 20 MSPS ADC, Single Channel, U10, outputs D1-D8 connected to PD0-PD7, OE# grounded, CLOCK from CTL2 on U6
* '''I2C EEPROM''': Atmel 24C02C
* '''Low-dropout voltage regulator''': Advanced Monolithic Systems AMS1117-3.3
* '''Crystal''': 24MHz
* '''Multiplexer''': HCF4051 - Single 8-Channel Analog Multiplexer/Demultiplexer, U12, channel selectors B and C grounded, selector A controlled by PA0 on U6
* '''Op Amp''': LM358 - Single Supply Dual Operational Amplifiers, U15
* ...

== Photos ==

<gallery>
File:Studio XZL AX.jpeg|Device, front
File:Studio XZL AX Probe Port.jpeg|Probe port
File:Studio XZL AX USB.jpeg|USB port
File:Studio XZL AX.back.jpg|Device, back
File:Studio XZL AX PCB.jpeg|PCB, top
File:Studio XZL AX PCB underside.jpeg|PCB, bottom
File:Studio XZL AX clips.jpeg|Probe clips
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

TODO.

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:Supported]]

XZL Studio AX

2014-11-08T15:26:39Z

Nihilist: /* Hardware */ added 2 more ICs recognized from the photo

{{DISPLAYTITLE:XZL_Studio AX}}
{{Infobox logic analyzer
| image = [[File:Xzl studio ax mugshot.png|180px]]
| name = XZL_Studio AX
| status = supported
| source_code_dir = fx2lafw
| channels = 8
| samplerate = 24MHz
| samplerate_state = —
| triggers = 1 independent trigger + (SW-probe 0,1)
| voltages = Digital: max. 5.5V Analog: -10V — +10V
| threshold = Digital: Fixed: VIH=1.4V, VIL=0.8V
| memory = none
| compression = none
| website = [http://www.hotmcu.com/xzl-ax-oscilloscope-and-logic-analyzer-ax-pro-logic-analyzer-p-14.html?cPath=3_26 hotmcu.com]
}}

The '''XZL_Studio AX''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the [[CWAV USBee AX-Pro]].

In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer.

'''Note''': Only the logic analyzer functionality is supported so far, analog support is work in progress, as is the independent trigger.

See [[XZL_Studio AX/Info]] for some more details (such as '''lsusb -v''' output) on the device.

== Hardware ==

* '''Main chip''': Cypress CY7C68013A-56LTXC (FX2LP)
* '''ADC''': 1x Texas Instruments TLC5510I (SO 24pin package), 8-Bit, 20 MSPS ADC, Single Channel
* '''I2C EEPROM''': Atmel 24C02C
* '''Low-dropout voltage regulator''': Advanced Monolithic Systems AMS1117-3.3
* '''Crystal''': 24MHz
* '''Multiplexer''': HCF4051 - Single 8-Channel Analog Multiplexer/Demultiplexer
* '''Op Amp''': LM358 - Single Supply Dual Operational Amplifiers
* ...

== Photos ==

<gallery>
File:Studio XZL AX.jpeg|Device, front
File:Studio XZL AX Probe Port.jpeg|Probe port
File:Studio XZL AX USB.jpeg|USB port
File:Studio XZL AX.back.jpg|Device, back
File:Studio XZL AX PCB.jpeg|PCB, top
File:Studio XZL AX PCB underside.jpeg|PCB, bottom
File:Studio XZL AX clips.jpeg|Probe clips
</gallery>

== Protocol ==

Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol.

== Resources ==

TODO.

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:Supported]]