sigrok - User contributions [en]

Digilent Analog Discovery

2013-01-01T20:57:24Z

Jstuber: Adds lsusb output

[[File:Digilent_analog-discovery.jpg|thumb|right|Digilent Analog Discovery]]

The [http://www.digilentinc.com/Products/Detail.cfm?Prod=ANALOG-DISCOVERY Digilent Analog Discovery] is a 100MSa/s oscilloscope, function generator, logic analyzer and pattern generator.

== Hardware ==

PCB top side

* XC6SLX16 Xilinx Spartan 6 FPGA
* [http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad9648/products/product.html AD9648BCPZ-125] 14-Bit 125 MSa/s ADC
* [http://www.analog.com/en/rfif-components/pll-synthesizersvcos/adf4360-9/products/product.html ADF4360-9] 65 to 400MHz VCO
* 2 [http://www.analog.com/en/specialty-amplifiers/differential-amplifiers/ada4940-2/products/product.html ADA4940-2ACPZ] ADC driver
* 2 [http://www.analog.com/en/switchesmultiplexers/analog-switches/adg612/products/product.html ADG612] CMOS switches
* 2 [http://www.analog.com/en/all-operational-amplifiers-op-amps/operational-amplifiers-op-amps/ad8066/products/product.html AD8066ARMZ] 145 MHz OpAmp
* FTDI FT232HQ USB-to-serial interface

PCB bottom side

* [http://www.analog.com/en/digital-to-analog-converters/high-speed-da-converters/ad9717/products/product.html AD9717BCPZ] 14-bit 125MSa/s DAC
* [http://www.analog.com/en/digital-to-analog-converters/da-converters/ad5645r/products/product.html AD5645R] Quad 14-bit DAC with I2C interface
* [http://www.analog.com/en/audiovideo-products/video-ampsbuffersfilters/ad8058/products/product.html AD8058ARM] 325 MHz amplifier (marking H8A)
* 2 [http://www.analog.com/en/all-operational-amplifiers-op-amps/operational-amplifiers-op-amps/ada4051-2/products/product.html AD4051-2] OpAmp (marking A2M)
* [http://www.analog.com/en/digital-to-analog-converters/da-converters/ad5623r/products/product.html AD5623R] Dual 12-bit DAC (marking D81)
* [http://www.analog.com/en/all-operational-amplifiers-op-amps/operational-amplifiers-op-amps/ad8591/products/product.html AD8591] OpAmp 250mA output current (marking AQA)
* 2 [http://www.analog.com/en/power-management/hot-swap/adm1177/products/product.html ADM1177-1] Hot swap controller (marking M5Y)

== Photos ==

<gallery>
File:Digilent_analog-discovery.jpg|Device, top
File:Digilent_analog-discovery_bottom.jpg|Device, bottom
File:Digilent_analog-discovery_front.jpg|Device, front
File:Digilent_analog-discovery_back.jpg|Device, back
File:Digilent_analog-discovery_bottom_no-feet.jpg|Device, bottom with rubber feet removed
File:Digilent_analog-discovery_pcb_front.jpg|Device, PCB top
File:Digilent_analog-discovery_pcb_back.jpg|Device, PCB bottom
</gallery>

== lsusb ==


$ '''lsusb -vvv'''
Bus 001 Device 003: ID 0403:6014 Future Technology Devices International, Ltd FT232H Single HS USB-UART/FIFO IC
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0403 Future Technology Devices International, Ltd
idProduct 0x6014 FT232H Single HS USB-UART/FIFO IC
bcdDevice 9.00
iManufacturer 1 Digilent
iProduct 2 Digilent USB Device
iSerial 3 210244449192
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 Digilent USB Device
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)


== Protocol ==

TODO

== Resources ==

TODO.

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:Function generator]]
[[Category:Planned]]

Digilent Analog Discovery

2012-12-31T16:37:13Z

Jstuber: /* Hardware */

Digilent Analog Discovery

2012-12-31T15:05:23Z

Jstuber: Adds pictures

File:Digilent analog-discovery back.jpg

2012-12-31T15:03:16Z

Jstuber:

== Licensing ==
{{CC-BY-SA-3.0}}

File:Digilent analog-discovery front.jpg

2012-12-31T15:02:52Z

Jstuber:

== Licensing ==
{{CC-BY-SA-3.0}}

File:Digilent analog-discovery pcb back.jpg

2012-12-31T15:01:04Z

Jstuber:

== Licensing ==
{{CC-BY-SA-3.0}}

File:Digilent analog-discovery pcb front.jpg

2012-12-31T15:00:15Z

Jstuber:

== Licensing ==
{{CC-BY-SA-3.0}}

File:Digilent analog-discovery bottom no-feet.jpg

2012-12-31T14:59:07Z

Jstuber:

== Licensing ==
{{CC-BY-SA-3.0}}

File:Digilent analog-discovery bottom.jpg

2012-12-31T14:58:02Z

Jstuber:

== Licensing ==
{{CC-BY-SA-3.0}}

Digilent Analog Discovery

2012-12-31T13:59:15Z

Jstuber: Adds category function generator

Digilent Analog Discovery

2012-12-31T13:06:41Z

Jstuber: First version

Supported hardware

2012-12-31T12:57:30Z

Jstuber: Adds Digilent Analog Discovery

sigrok is intended as a flexible, cross-platform, and '''hardware-independent''' software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

The lists are sorted by category (supported, in progress, planned), and alphabetically within those categories.

== Logic analyzers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_supported|ARMFLY Mini-Logic|File:ARMFLY MINI LOGIC.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}

{{hwsup_supported|ASIX SIGMA|File:Sigma2_2.png|is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate, and with 256Mbit on-board memory.}}

{{hwsup_supported|Braintechnology USB Interface V2.x|File:Braintechnology_usb_interface_v26.png|is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.}}

{{hwsup_supported|Braintechnology USB-LPS|File:Braintechnology_usb_lps.png|is a USB-based, 16-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.}}

{{hwsup_supported|ChronoVu LA8|File:Chronovu la8 front.png|is a USB-based, 8-channel logic analyzer with up to 100MHz sampling rate.}}

{{hwsup_supported|CWAV USBee SX|File:Cwav_usbee_sx.png|is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.}}

{{hwsup_progress|Dangerous Prototypes Buspirate|File:Buspirate_v3.png|is a USB-based, 5-channel logic analyzer with up to 1MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol]. The Buspirate supports a logic analyzer mode and can thus be used for sample captures, however only at low speeds.}}

{{hwsup_supported|EE Electronics ESLA100|File:Eeelec xla esla100.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}

{{hwsup_supported|Lcsoft Mini Board|File:Lcsoft-miniboard-front.png|is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.}}

{{hwsup_supported|Logic Shrimp|File:logic-shrimp-front.png|is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].}}

{{hwsup_supported|Openbench Logic Sniffer|File:Openbench logic sniffer front.png|(OLS) is a USB-based (and FPGA-based), 32-channel logic analyzer with up to 100MHz sampling rate and advanced trigger functionality. It is a fully open source device — the circuit design, VHDL code for the FPGA, firmware for the PIC microcontroller and Java-based client software are all freely available. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].}}

{{hwsup_supported|Robomotic BugLogic 3|File:Robomotic buglogic3.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}

{{hwsup_supported|Robomotic MiniLogic|File:Robomotic_minilogic.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}

{{hwsup_supported|Saleae Logic|File:Saleae Logic.png|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.}}

{{hwsup_supported|ZEROPLUS Logic Cube LAP-C(16032)|File:Zeroplus Logic Cube.png| is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.}}

{{hwsup_progress|RockyLogic Ant8|File:Rockylogic_ant8.png|is a USB-based, 8-channel logic analyzer with up to 500MHz sampling rate.}}

{{hwsup_progress|RockyLogic Ant18e|File:RockyLogic Ant18e.png|is a USB-based, 18-channel logic analyzer with up to 1GHz sampling rate.}}

{{hwsup_planned|Acute PKLA-1216|File:Acute_pkla1216.png|is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.}}

{{hwsup_planned|Ideofy LA-08|File:Ideofy_la_08.png|is a USB-based, 8-channel logic analyzer with a max. samplerate of 96Msps@2ch (or 60msps@4ch, or 30msps@8ch).}}

{{hwsup_planned|Ikalogic SCANALOGIC-2 PRO|File:Ikalogic_scanalogic2.png|is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate.}}

{{hwsup_planned|Intronix Logicport LA1034|File:Intronix Logicport.png|is a USB-based (and FPGA-based), 34-channel logic analyzer with up to 500MHz sampling rate.}}

{{hwsup_planned|Microchip PICkit2|File:Microchip_pickit2.png|is a USB-based, 3-channel logic analyzer with up to 1MHz sampling rate. The PICkit2 is actually a programmer/debugger for PIC microcontrollers, but it can also be used as logic analyzer.}}

{{hwsup_planned|MiniLA Mockup|File:Minila mockup.jpg|is a USB-based, 32-channel logic analyzer with up to 100MHz sampling rate.}}

{{hwsup_planned|Saleae Logic16|File:Saleae_Logic16_bottom.png|is a USB-based, 16-channel logic analyzer with 100/50/25/12.5MHz sampling rate (at 2/4/8/16 enabled channels).}}

{{hwsup_planned|Sysclk LWLA1016|File:Sysclk lwla1016 front.jpg|is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.}}

{{hwsup_planned|TechTools DigiView DV1-100|File:Techtools_digiview_dv1-100.png|is a USB-based, 18-channel logic analyzer with 100MHz sampling rate.}}

{{hwsup_planned|ZEROPLUS LAP-16128U|File:Zeroplus_lap-16128u.png|is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.}}

{{hwsup_planned|ZEROPLUS Logic Cube LAP-C(322000)|File:Sigrok_logo_no_text_transparent_512.png|is a USB-based, 32-channel logic analyzer with a max. samplerate of 200MHz.}}

{{hwsup_planned|ZLG LA1032|File:Zlg_la1032.png|is a USB-based, 32-channel, 100MHz logic analyzer.}}

|}

== Mixed-signal devices ==

Devices which can be used as both logic analyzer and oscilloscopes.

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_supported|ARMFLY AX-Pro|File:AX-Pro.JPG|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

'''Note:''' Only the logic analyzer functionality is supported so far, analog support is work in progress.}}

{{hwsup_supported|EE Electronics ESLA201A|File:Esla201a.JPG|is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

'''Note:''' Only the logic analyzer functionality is supported so far, analog support is work in progress.}}

{{hwsup_supported|XZL Studio DX|File:Sigrok_logo_no_text_transparent_512.png|is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

'''Note:''' Only the logic analyzer functionality is supported so far, analog support is work in progress.}}

{{hwsup_progress|Link Instruments MSO-19|File:Link Instruments MSO-19 front.png|is a USB-based, 1-channel 2GSa/s oscilloscope, 8-channel 200MSa/s logic analyzer, 100MSa/s pattern generator and a [https://en.wikipedia.org/wiki/Time-domain_reflectometer TDR].}}

{{hwsup_planned|Agilent MSO7104A|File:Agilent_MSO7104A.jpg|is a standalone, 4-channel mixed-signal digital storage oscilloscope (1GHz bandwidth, 4GSa/s samplerate, 16-channel logic analyzer).}}

{{hwsup_planned|Digilent Analog Discovery|File:Digilent_analog-discovery.jpg|is a USB-based 100MSa/s dual channel oscilloscope, function generator, logic analyzer and pattern generator.}}

{{hwsup_planned|Meilhaus MEphisto Scope1|File:Meilhaus_mephisto_scope1.png|is a USB-based multifunction acquisition device.}}

{{hwsup_planned|PoLabs PoScope Basic2|File:Polabs_poscope_basic2.png|is a USB-based, 16-channel logic analyzer (plus oscilloscope, signal/pattern generator, and more) with up to 8MHz sampling rate.}}

{{hwsup_planned|QuantAsylum QA100|File:QA100.png|is a USB-based, mixed-mode oscilloscope with 12 digital inputs, 2 analog, 1 trigger and 1 audio waveform generator.}}

{{hwsup_planned|Rigol VS5202D|File:Rigol_VS5202D_Full.jpg|is a USB-based, 2-channel analog oscilloscope (400MSa/S, 200MHz bandwidth) and 16-channel logic analyzer (200MHz sampling rate).}}

|}

== Oscilloscopes ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_supported|Fluke ScopeMeter 199B|File:Fluke_Scopemeter_199B.png|is a handheld combined multimeter and oscilloscope. Only the multimeter functionality is supported; the device's slow communication speed does not allow for properly supporting it as an oscilloscope in sigrok.}}

{{hwsup_supported|Hantek DSO-2090|File:Hantek DSO-2090.png|is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.}}

{{hwsup_progress|Hantek DSO-5200A|File:Hantek dso-5200a device front.png|is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.}}

{{hwsup_progress|Velleman PCSU1000|File:Velleman PCSU1000.png|is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.}}

{{hwsup_planned|Hantek DSO-1200|File:Sigrok_logo_no_text_transparent_512.png|is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 500MS/s sampling rate (and a multimeter).}}

{{hwsup_planned|Fluke ScopeMeter 123|File:Fluke scopemeter123.png|is a handheld, 2-channel oscilloscope with an analog bandwidth of 20MHz and 25MS/s sampling rate.}}

{{hwsup_planned|Focussz Fosc21|File:Focussz fosc21 back.jpg|is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3kHz and a sampling rate of 8kHz (1 channel) / 4kHz (2 channels).}}

{{hwsup_planned|Nexus-Computing OsciPrime|File:OsciPrime.png|is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3.3MHz-8MHz. It is 100% open source hardware and software.}}

{{hwsup_planned|Pico Technology PicoScope 2203|File:Picoscope 2203 front.jpg|is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).}}

{{hwsup_planned|Pico Technology PicoScope 2205|File:PicoScope 2205 front.jpg|is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).}}

{{hwsup_planned|Pico Technology PicoScope 3206|File:Picoscope 3206.png|is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).}}

{{hwsup_planned|Rigol DS1052E|File:Rigol DS1052E.png|is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 100MHz analog bandwidth with a software modification.}}

{{hwsup_planned|USB-DUXfast|File:Usbduxfast.png|is an USB-based analog data acquisition device. It supports up to 16 channels at 3 MHz.}}

{{hwsup_planned|Voltcraft DSO-3062C|File:Voltcraft DSO-3062C.png|is a 60MHz, 1GSa/s, 2-channel digital storage oscilloscope. It can be upgraded to 200MHz analog bandwidth with a software modification.}}

|}

== Multimeters ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_supported|Agilent U1231A|File:Sigrok_logo_no_text_transparent_512.png|is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.}}

{{hwsup_supported|Agilent U1232A|File:Agilent U1232A.png|is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.}}

{{hwsup_supported|Agilent U1233A|File:Sigrok_logo_no_text_transparent_512.png|is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.}}

{{hwsup_progress|Brymen BM857|File:Bm_857_mugshot_500000.png|is a 50000 counts (500000 DC), CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 connectivity.}}

{{hwsup_supported|Digitek DT4000ZC|File:Digitek_dt4000zc_device_front.png|is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.}}

{{hwsup_supported|Fluke 187/189|File:Fluke 187.png|are 50000 counts, handheld digital multimeters with RS232 connectivity.}}

{{hwsup_supported|Fluke 287/289|File:Fluke 287.png|are 50000 counts handheld digital multimeters with RS232 connectivity.}}

{{hwsup_supported|MASTECH MAS345|File:Mastech mas345 device front.png|is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.}}

{{hwsup_supported|PCE PCE-DM32|File:Pce-pce-dm32.png|is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 connectivity.}}

{{hwsup_supported|PeakTech 3410|File:Metex_me-31.png|is a 4000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.}}

{{hwsup_supported|PeakTech 4370|File:Peaktech 4370 device front.png|is a 2000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.}}

{{hwsup_supported|RadioShack 22-168|File:Rs_22_168_mugshot.png|is a 2000 counts, handheld digital multimeter with RS232 connectivity.}}

{{hwsup_supported|RadioShack 22-812|File:radioshack_22_812_front.png|is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.}}

{{hwsup_supported|TekPower TP4000ZC|File:Tp4000zc_front.png|is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.}}

{{hwsup_supported|UNI-T UT61D|File:Uni t ut61d device.png|is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.}}

{{hwsup_supported|V&A VA18B|File:Va_va18b.png|is a 6000 counts, CAT II (1000V) handheld digital multimeter with USB connectivity.}}

{{hwsup_supported|Victor 86C|File:Victor 86c device front.png|is a 4000 counts, CAT III (1000V) handheld digital multimeter with USB connectivity.}}

{{hwsup_supported|Victor 70C|File:Victor 70C.png|is a 4000 counts, CAT II handheld digital multimeter with USB connectivity.}}

{{hwsup_supported|Voltcraft VC-820|File:Voltcraft vc820 device.png|is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.}}

{{hwsup_progress|UNI-T UT61E|File:Old ver front.png|is a 22000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.}}

{{hwsup_progress|Voltcraft VC-840|File:Voltcraft vc840 device front.png|is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.}}

{{hwsup_planned|Escort 179|File:Escort 179 device front.png|is a 10000 counts, handheld digital multimeter with RS232 connectivity.}}

{{hwsup_planned|MASTECH M9803R|File:800px-Mastech m9803r device front.png|is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity.}}

{{hwsup_planned|Protek 6500|File:Sigrok_logo_no_text_transparent_512.png|is a 50000 counts handheld digital multimeter with RS232 connectivity.}}

{{hwsup_planned|Voltcraft M-4660A|File:Voltcraft m4660a device front.png|is a 20000 counts, handheld digital multimeter with RS232 connectivity.}}

|}

== LCR meters ==

TODO.

== Sound level meters ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_supported|Colead SL-5868P|File:Colead SL-5868P.png|is a sound level meter with RS232 connectivity.}}

{{hwsup_supported|Tondaj SL-814|File:Tondaj sl-814.png|is a sound level meter with USB connectivity.}}

{{hwsup_planned|CEM DT-8852|File:CEM DT-8852.png|is an IEC 61672-1 class 2-compliant sound level meter with USB connectivity.}}

{{hwsup_planned|PCE PCE-222|File:Pce_pce-222_front.png|is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity. }}

{{hwsup_planned|Voltcraft DL-160S|File:Voltcraft_dl_160s.png|is a sound level meter with USB connectivity.}}

|}

== Thermometers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_supported|Lascar Electronics EL-USB-2|File:EL-USB-2.png|is a USB-based temperature and humidity logger.}}

{{hwsup_planned|PCE PCE-222|File:Pce_pce-222_front.png|is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity. }}

{{hwsup_planned|RDing TEMPer|File:Rding temper front.png|is a USB-based temperature logger.}}

{{hwsup_planned|RDing TEMPer Gold|File:Rding temper gold device front.png|is a USB-based temperature logger.}}

{{hwsup_planned|RDing TEMPer1|File:Rding temper1 device front.png|is a USB-based temperature logger.}}

{{hwsup_planned|RDing TEMPer1K2|File:Pcsensor temper1k2 front.jpg|is a USB-based temperature logger.}}

{{hwsup_planned|Voltcraft DL-120TH|File:Voltcraft dl-120th front.jpg|is a USB-based temperature logger.}}

{{hwsup_planned|Voltcraft DL-140TH|File:Voltcraft_dl-140th.png|is a USB-based temperature logger.}}

{{hwsup_planned|UNI-T UT325|File:Uni-t ut325 front.png|is a dual thermocouple logging thermometer.}}

|}

== Hygrometers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_planned|PCE PCE-222|File:Pce_pce-222_front.png|is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity. }}

|}

== Anemometers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_planned|MASTECH MS6252B|File:Mastech ms6252b device front.jpg|an anemometer with USB connectivity.}}

|}

== Light meters ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_planned|Lutron YK-2005LX|File:Lutron YK-2005LX.png|is a light meter with RS232 connectivity.}}

{{hwsup_planned|PCE PCE-222|File:Pce_pce-222_front.png|is a multi-function measurement device (light meter, thermometer, hygrometer, and sound level meter) with RS232 connectivity. }}

|}

== Dataloggers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_supported|Lascar Electronics EL-USB-CO|File:EL-USB-CO.png|is a standalone carbon monoxide (CO) logger.}}

{{hwsup_planned|GSG Indoor Air Monitor|File:Gsg_indoor_air_monitor.png|is a USB-based air quality monitor.}}

{{hwsup_planned|MAUL studio i|File:Maul_studio_i.png|is an RS232-based weighing scale.}}

{{hwsup_planned|Voltcraft CO-20|File:Voltcraft co-20 front.jpg|is a USB-based air quality monitor.}}

|}

== Function generators ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_planned|Hantek DDS-3X25|File:Hantek DDS-3X25 top.png|is a 25MHz PC-based function generator (requires a USB connection to work).}}

{{hwsup_planned|Siglent SDG1010|File:Siglent sdg1010 device front 8116.png|is a 10MHz function generator with USB connectivity.}}

|}

== Power supplies ==

TODO

== GPIB interfaces ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

{{hwsup_planned|Beiming S82357|File:Beiming_s82357.png|is a USB-based, hardware-implemented [[GPIB]] interface (a clone of the [http://www.home.agilent.com/en/pd-851808-pn-82357B/usb-gpib-interface-high-speed-usb-20 Agilent 82357B USB/GPIB interface]).}}

{{hwsup_planned|ICS 488-USB|File:ICS 488-USB.png|is a USB-based, hardware-implemented [[GPIB]] interface.}}

{{hwsup_planned|GPIB-USB 82357B clone|File:GPIB-USB 82357B clone.png|is a USB-based, hardware-implemented [[GPIB]] interface (a clone of the [http://www.home.agilent.com/en/pd-851808-pn-82357B/usb-gpib-interface-high-speed-usb-20 Agilent 82357B USB/GPIB interface]).}}

{{hwsup_planned|National Instruments GPIB-ENET|File:NI GPIB-ENET.png|is an Ethernet-based, hardware-implemented [[GPIB]] interface.}}

{{hwsup_planned|National Instruments GPIB-USB-HS|File:NI GPIB-USB-HS.png|is a USB-based, hardware-implemented [[GPIB]] interface.}}

{{hwsup_planned|Prologix GPIB-USB|File:Prologix-usb.png|is a USB-based, firmware-implemented [[GPIB]] interface.}}

|}

== Potential other candidates ==

If you own any other logic analyzers (or oscilloscopes, multimeters, dataloggers, etc.) and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Contact [mailto:bert@biot.com Bert Vermeulen] and [mailto:uwe@hermann-uwe.de Uwe Hermann] if you want to help out.

__FORCETOC__

File:Digilent analog-discovery.jpg

2012-12-31T12:50:13Z

Jstuber:

== Licensing ==
{{CC-BY-SA-3.0}}