sigrok - User contributions [en]

Supported hardware

2012-09-14T14:26:38Z

Jkahrs: /* Oscilloscopes */

sigrok is intended as a flexible, cross-platform, and '''hardware-independent''' software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

== Logic analyzers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Saleae Logic.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Saleae Logic]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Eeelec xla esla100.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[EE Electronics ESLA100]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:ASIX SIGMA.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ASIX SIGMA|ASIX SIGMA/SIGMA2]] is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate, and with 256Mbit on-board memory.

|-
| [[File:Openbench logic sniffer front.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Openbench Logic Sniffer]] (OLS) is a USB-based (and FPGA-based), 32-channel logic analyzer with up to 100MHz sampling rate and advanced trigger functionality. It is a fully open source device — the circuit design, VHDL code for the FPGA, firmware for the PIC microcontroller and Java-based client software are all freely available. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].

|-
| [[File:logic-shrimp-front.png|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Logic Shrimp]] is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].

|-
| [[File:Zeroplus Logic Cube.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ZEROPLUS Logic Cube LAP-C]] (16032) is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.

|-
| [[File:Chronovu la8 device.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [http://www.chronovu.com/ ChronoVu LA8] is a USB-based, 8-channel logic analyzer with up to 100MHz sampling rate.

|-
| [[File:Robomotic buglogic3.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Robomotic BugLogic 3]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Robomotic minilogic.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Robomotic MiniLogic]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Lcsoft-miniboard-front.png|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Lcsoft Mini Board]] is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Braintechnology usb lps.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Braintechnology USB-LPS]] is a USB-based, 16-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.

|-
| [[File:Cwav usbee sx.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[CWAV USBee SX]] is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.

|-
| [[File:ARMFLY MINI LOGIC PCB.JPG|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ARMFLY Mini-Logic]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Braintechnology usb interface v2x pcb front.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Braintechnology USB Interface V2.x]] is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Buspirate v3 front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Buspirate|Buspirate v3]] is a USB-based, 5-channel logic analyzer with up to 1MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol]. The Buspirate supports a logic analyzer mode and can thus be used for sample captures, however only at low speeds.

|-
| [[File:Ant18e_closed.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[RockyLogic Ant18e]] is a USB-based, 18-channel logic analyzer with up to 1GHz sampling rate.

|-
| [[File:Rockylogic ant8 device.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[RockyLogic Ant8]] is a USB-based, 8-channel logic analyzer with up to 500MHz sampling rate.

|-
| [[File:Ikalogic scanalogic2 device with probes.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Ikalogic SCANALOGIC-2 PRO]] is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate.

|-
| [[File:Microchip pickit2 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Microchip PICkit2]] is a USB-based, 3-channel logic analyzer with up to 1MHz sampling rate. The PICkit2 is actually a programmer/debugger for PIC microcontrollers, but it can also be used as logic analyzer.

|-
| [[File:Minila mockup.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[MiniLA Mockup]] is a USB-based, 32-channel logic analyzer with up to 100MHz sampling rate.

|-
| [[File:Acute_pkla1216_front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Acute PKLA-1216]] is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.

|-
| [[File:Saleae_Logic16_bottom.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Saleae Logic16]] is a USB-based, 16-channel logic analyzer with 100/50/25/12.5MHz sampling rate (at 2/4/8/16 enabled channels).

|-
| [[File:Intronix Logicport.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Intronix Logicport LA1034]] is a USB-based (and FPGA-based), 34-channel logic analyzer with up to 500MHz sampling rate.

|}

== Mixed-signal devices ==

Devices which can be used as both logic analyzer and oscilloscopes.

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:AX-Pro.JPG|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ARMFLY AX-Pro]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

'''Note:''' Only the logic analyzer functionality is supported so far, analog support is work in progress.

|-
| [[File:Esla201a.JPG|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[EE Electronics ESLA201A]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

'''Note:''' Only the logic analyzer functionality is supported so far, analog support is work in progress.

|-
| [[File:Link Instruments MSO-19 front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Link Instruments MSO-19‎]] is a USB-based, 1-channel 2GSa/s oscilloscope, 8-channel 200MSa/s logic analyzer, 100MSa/s pattern generator and a [https://en.wikipedia.org/wiki/Time-domain_reflectometer TDR].

|-
| [[File:QA100 Full.JPG|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[QuantAsylum QA100]] is a USB-based, mixed-mode oscilloscope with 12 digital inputs, 2 analog, 1 trigger and 1 audio waveform generator.

|-
| [[File:Polabs poscope basic2 device top.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[PoLabs PoScope Basic2]] is a USB-based, 16-channel logic analyzer (plus oscilloscope, signal/pattern generator, and more) with up to 8MHz sampling rate.

|-
| [[File:Rigol_VS5202D_Full.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Rigol VS5202D]] is a USB-based, 2-channel analog oscilloscope (400MSa/S, 200MHz bandwidth) and 16-channel logic analyzer (200MHz sampling rate).

|-
| [[File:Agilent_MSO7104A.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Agilent MSO7104A]] is a standalone, 4-channel mixed-signal digital storage oscilloscope (1GHz bandwidth, 4GSa/s samplerate, 16-channel logic analyzer).

|}

== Oscilloscopes ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Dso2090-case-top-small.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Hantek DSO-2090]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.

|-
| [[File:Hantek dso-5200a device front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Hantek DSO-5200A]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.

|-
| [[File:Velleman pcsu1000 pcb front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Velleman PCSU1000]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.

|-
| [[File:Picoscope 2203 front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Pico Technology PicoScope 2203]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).

|-
| [[File:PicoScope 2205 front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Pico Technology PicoScope 2205]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).

|}

== Multimeters ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Victor 70C.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Victor 70C]] is a 4000 counts, CAT II handheld digital multimeter with USB connectivity.

|-
| [[File:Agilent U1232A.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Agilent U123xA]] series are 6000 counts handheld digital multimeters with IR connectivity.

|-
| [[File:Mastech va18b device front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[V&A VA18B]] is a 6000 counts, CAT II (1000V) handheld digital multimeter with USB connectivity.

|-
| [[File:Uni t ut61d device.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[UNI-T UT61D]] is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Mastech mas345 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[MASTECH MAS345]] is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.

|-
| [[File:Mastech m9803r device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[MASTECH M9803R]] is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity.

|-
| [[File:Peaktech 4370 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Peaktech 4370]] is a 2000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.

|-
| [[File:New ver.JPG|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[UNI-T UT61E]] is a 22000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Voltcraft m4660a device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Voltcraft M-4660A]] is a 20000 counts, handheld digital multimeter with RS232 connectivity.

|-
| [[File:Voltcraft vc820 device.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Voltcraft VC-820]] is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Voltcraft vc840 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Voltcraft VC-840]] is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Escort 179 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Escort 179]] is a 10000 counts, handheld digital multimeter with RS232 connectivity.

|-
|
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Fluke 187/189]] are 50000 counts, handheld digital multimeter with RS232 connectivity.

|}

== Dataloggers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Tondaj sl-814 device front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Tondaj SL-814]] is a sound level meter with USB connectivity.

|-
| [[File:Rding temper front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[RDing TEMPer]] is a USB-based temperature logger.

|-
| [[File:Rding temper1 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[RDing TEMPer1]] is a USB-based temperature logger.

|-
| [[File:Rding temper gold device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[RDing TEMPer Gold]] is a USB-based temperature logger.

|-
| [[File:Uni-t ut325 front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[UNI-T UT325]] is a dual thermocouple logging thermometer.

|}

== Function generators ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Hantek DDS-3X25 top.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Hantek DDS-3X25]] is a 25MHz PC-based function generator (requires a USB connection to work).

|-
| [[File:Siglent sdg1010 device front 8116.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Siglent SDG1010]] is a 10MHz function generator with USB connectivity.

|}

== Power supplies ==

TODO

== GPIB interfaces ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Beiming s82357 device top.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Beiming S82357]] is a USB-based, hardware-implemented [[GPIB]] interface (a clone of the [http://www.home.agilent.com/agilent/product.jspx?ckey=851808&nid=-34193.426029.00&id=851808&cmpid=zzfind82357b Agilent 82357B USB/GPIB interface]).

|-
| [[File:GPIB-USB 82357B clone front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[GPIB-USB 82357B clone]] is a USB-based, hardware-implemented [[GPIB]] interface (a clone of the [http://www.home.agilent.com/agilent/product.jspx?ckey=851808&nid=-34193.426029.00&id=851808&cmpid=zzfind82357b Agilent 82357B USB/GPIB interface]).

|-
| [[File:Prologix-usb.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Prologix GPIB-USB]] a USB-based, firmware-implemented [[GPIB]] interface.

|-
| [[File:NI GPIB-ENET front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[National Instruments GPIB-ENET]] is an Ethernet-based, hardware-implemented [[GPIB]] interface.

|-
| [[File:ICS 488-USB front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[ICS 488-USB]] is a USB-based GPIB interface.

|}

== Potential other candidates ==

If you own any other logic analyzers (or oscilloscopes, multimeters, dataloggers, etc.) and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Contact [mailto:bert@biot.com Bert Vermeulen] and [mailto:uwe@hermann-uwe.de Uwe Hermann] if you want to help out.

__FORCETOC__

Linux

2012-09-12T12:55:24Z

Jkahrs: /* Installing the build-dependencies */

[[File:Sigrok-gtk-0.1.png|thumb|320px|right|sigrok-gtk 0.1.0 on Linux]]

This page describes how to build/install sigrok on Linux.

== Distribution packages ==

See [[Downloads#Binaries_and_distribution_packages|Downloads]].

== Building from source ==

=== Requirements ===

* git
* gcc (>= 4.0)
* g++
* make
* autoconf >= 2.63
* automake >= 1.11
* libtool
* pkg-config >= 0.22
* [http://library.gnome.org/devel/glib/unstable/ libglib] >= 2.28.0
* [http://www.libusb.org libusb] >= 1.0.5 (optional, only required for some devices)
* [http://nih.at/libzip/ libzip] >= 0.8
* zlib >= 1.2.3.1
* [http://www.intra2net.com/en/developer/libftdi/ libftdi] >= 0.16 (optional, only required for some devices)
* [http://www.kernel.org/pub/linux/utils/kernel/hotplug/libudev/ libudev] >= 151 (optional, only required for some devices)
* [http://www.python.org Python] >= 3.0 (optional, only required for libsigrokdecode)
* GTK+ (optional, only required for building/editing sigrok-gtk)
* [http://qt.nokia.com Qt + Qt Creator] >= 4.5 (optional, only required for building/editing the sigrok-qt)

=== Installing the build-dependencies ===

On most Linux distributions there are pre-built packages for the sigrok dependencies (if not, you have to build the packages from source). The installation using a package manager is usually pretty simple.

Debian/Ubuntu:

$ '''sudo apt-get install git-core gcc g++ make autoconf automake libtool pkg-config \'''
'''libglib2.0-dev libftdi-dev libudev-dev libusb-1.0-0-dev libzip-dev zlib1g-dev python3-dev \'''
'''libgtk2.0-dev qtcreator qt4-designer qt4-dev-tools libqt4-dev'''

Fedora (TODO: Needs updates):

$ '''yum install gcc-c++ libtool glib2-devel libftdi-devel libusb1-devel libzip-devel qt-devel python3-devel'''

OpenSuSE (12.2):
$ '''zypper install gcc-c++ libtool glib2-devel libftdi1-devel libusb-1_0-devel libzip-devel libqt4-devel python3-devel'''

=== Building ===

First, checkout the sources:

$ '''git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/sigrok'''
$ '''cd sigrok'''

Building [[libsigrok]]:

$ '''cd libsigrok'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

Building [[libsigrokdecode]]:

$ '''cd libsigrokdecode'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

Then you need to build the chosen user interfaces (cli, qt or gtk).

For building [[sigrok-cli]] (the command-line interface for sigrok):

$ '''cd sigrok-cli'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

For building [[sigrok-gtk]] ('''Note:''' The GTK+ GUI is not yet usable!):

$ '''cd sigrok-gtk'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

For building [[sigrok-qt]] ('''Note:''' The Qt GUI is not yet usable!):

$ '''cd sigrok-qt'''
$ '''qmake'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

If you get warnings claiming potential symbol conflicts when running qmake, you are likely not invoking '''qmake-qt4'''. Try running '''qmake-qt4''' to force the correct version.

=== Pitfalls ===

If you get this error:

sigrok-cli: error while loading shared libraries: libsigrok.so.0: cannot open shared object file: No such file or directory

Then you have to rebuild the links to your shared libraries:

$ '''sudo ldconfig /usr/local/lib'''

=== Testing ===

Scan for devices:

$ '''sigrok-cli -D'''
The following devices were found:
ID Device
0 Zeroplus Logic Cube with 32 probes
demo Demo device with 8 probes

Get 10 samples from device 0 (Zeroplus Logic Cube in this example):

$ '''sigrok-cli -d 0 --samples 10'''

See [[sigrok-cli]] for further usage.

Linux

2012-09-12T12:54:12Z

Jkahrs: /* Installing the build-dependencies */ Added OpenSuSE

[[File:Sigrok-gtk-0.1.png|thumb|320px|right|sigrok-gtk 0.1.0 on Linux]]

This page describes how to build/install sigrok on Linux.

== Distribution packages ==

See [[Downloads#Binaries_and_distribution_packages|Downloads]].

== Building from source ==

=== Requirements ===

* git
* gcc (>= 4.0)
* g++
* make
* autoconf >= 2.63
* automake >= 1.11
* libtool
* pkg-config >= 0.22
* [http://library.gnome.org/devel/glib/unstable/ libglib] >= 2.28.0
* [http://www.libusb.org libusb] >= 1.0.5 (optional, only required for some devices)
* [http://nih.at/libzip/ libzip] >= 0.8
* zlib >= 1.2.3.1
* [http://www.intra2net.com/en/developer/libftdi/ libftdi] >= 0.16 (optional, only required for some devices)
* [http://www.kernel.org/pub/linux/utils/kernel/hotplug/libudev/ libudev] >= 151 (optional, only required for some devices)
* [http://www.python.org Python] >= 3.0 (optional, only required for libsigrokdecode)
* GTK+ (optional, only required for building/editing sigrok-gtk)
* [http://qt.nokia.com Qt + Qt Creator] >= 4.5 (optional, only required for building/editing the sigrok-qt)

=== Installing the build-dependencies ===

On most Linux distributions there are pre-built packages for the sigrok dependencies (if not, you have to build the packages from source). The installation using a package manager is usually pretty simple.

Debian/Ubuntu:

$ '''sudo apt-get install git-core gcc g++ make autoconf automake libtool pkg-config \'''
'''libglib2.0-dev libftdi-dev libudev-dev libusb-1.0-0-dev libzip-dev zlib1g-dev python3-dev \'''
'''libgtk2.0-dev qtcreator qt4-designer qt4-dev-tools libqt4-dev'''

Fedora (TODO: Needs updates):

$ '''yum install gcc-c++ libtool glib2-devel libftdi-devel libusb1-devel libzip-devel qt-devel python3-devel'''

OpenSuSE (12.2):
$ '''zypper install libtool glib2-devel libftdi1-devel libusb-1_0-devel libzip-devel libqt4-devel python3-devel'''

=== Building ===

First, checkout the sources:

$ '''git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/sigrok'''
$ '''cd sigrok'''

Building [[libsigrok]]:

$ '''cd libsigrok'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

Building [[libsigrokdecode]]:

$ '''cd libsigrokdecode'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

Then you need to build the chosen user interfaces (cli, qt or gtk).

For building [[sigrok-cli]] (the command-line interface for sigrok):

$ '''cd sigrok-cli'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

For building [[sigrok-gtk]] ('''Note:''' The GTK+ GUI is not yet usable!):

$ '''cd sigrok-gtk'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

For building [[sigrok-qt]] ('''Note:''' The Qt GUI is not yet usable!):

$ '''cd sigrok-qt'''
$ '''qmake'''
$ '''make'''
$ '''sudo make install'''
$ '''cd ..'''

If you get warnings claiming potential symbol conflicts when running qmake, you are likely not invoking '''qmake-qt4'''. Try running '''qmake-qt4''' to force the correct version.

=== Pitfalls ===

If you get this error:

sigrok-cli: error while loading shared libraries: libsigrok.so.0: cannot open shared object file: No such file or directory

Then you have to rebuild the links to your shared libraries:

$ '''sudo ldconfig /usr/local/lib'''

=== Testing ===

Scan for devices:

$ '''sigrok-cli -D'''
The following devices were found:
ID Device
0 Zeroplus Logic Cube with 32 probes
demo Demo device with 8 probes

Get 10 samples from device 0 (Zeroplus Logic Cube in this example):

$ '''sigrok-cli -d 0 --samples 10'''

See [[sigrok-cli]] for further usage.

Pico Technology PicoScope 2205

2012-09-10T08:52:15Z

Jkahrs: Added links to doc

Pico Technology PicoScope 2205

2012-09-10T08:34:03Z

Jkahrs: Moved output of 'lsusb -vvv' to separate info page

Pico Technology PicoScope 2205/Info

2012-09-10T08:33:17Z

Jkahrs: Filled with 'lsusb -vvv' content

Bus 002 Device 009: ID 0ce9:1007 pico Technology
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0ce9 pico Technology
idProduct 0x1007
bcdDevice 0.03
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Pico Technology PicoScope 2205

2012-09-10T08:32:01Z

Jkahrs: Inserted link to separate info page

[[File:PicoScope 2205 front.jpg|thumb|right|PicoScope 2205.]]

The [http://www.picotech.com/picoscope2200-specifications.html Pico Technology PicoScope 2205] is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 25MHz. The max. sampling rate (one-shot) is 200 MS/s (one channel mode) or 100 MS/s (two channel mode). The max. sampling rate for repetitive signals is 4 GS/s, the max. sampling rate in continuous streaming mode is 5 MS/s.

See [[Pico Technology PicoScope 2205/Info]] for more details (such as '''lsusb -vvv''' output) about the device.

Bus 002 Device 009: ID 0ce9:1007 pico Technology
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0ce9 pico Technology
idProduct 0x1007
bcdDevice 0.03
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

== Components ==

* Xilinx Spartan XC3S250E
* Cypress CY7C68013A-56PVXC
* Analog Devices AD9288
* Analog Devices AD8132
* Meder Electronics SIL05-1A72-71D
* Maxim MAX889S
* HC4052

== More photos ==

<gallery>
File:PicoScope 2205 inside1.jpg|Front inside
</gallery>

See also [http://www.flickr.com/photos/uwehermann/sets/72157625721726427/ the flickr set of the PicoScope 2203] which is very similar to the PicoScope 2205.

== Protocol ==

=== Firmware ===

=== Start acquisition ===

=== Sample format ===

=== End acquisition ===

=== Triggers ===

=== Voltage ranges ===

Pico Technology PicoScope 2205

2012-09-10T08:29:46Z

Jkahrs: /* More photos */

[[File:PicoScope 2205 front.jpg|thumb|right|PicoScope 2205.]]

The [http://www.picotech.com/picoscope2200-specifications.html Pico Technology PicoScope 2205] is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 25MHz. The max. sampling rate (one-shot) is 200 MS/s (one channel mode) or 100 MS/s (two channel mode). The max. sampling rate for repetitive signals is 4 GS/s, the max. sampling rate in continuous streaming mode is 5 MS/s.

On Linux the device is reported with '''lsusb -vvv''' as such:

Bus 002 Device 009: ID 0ce9:1007 pico Technology
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0ce9 pico Technology
idProduct 0x1007
bcdDevice 0.03
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

== Components ==

* Xilinx Spartan XC3S250E
* Cypress CY7C68013A-56PVXC
* Analog Devices AD9288
* Analog Devices AD8132
* Meder Electronics SIL05-1A72-71D
* Maxim MAX889S
* HC4052

== More photos ==

<gallery>
File:PicoScope 2205 inside1.jpg|Front inside
</gallery>

See also [http://www.flickr.com/photos/uwehermann/sets/72157625721726427/ the flickr set of the PicoScope 2203] which is very similar to the PicoScope 2205.

== Protocol ==

=== Firmware ===

=== Start acquisition ===

=== Sample format ===

=== End acquisition ===

=== Triggers ===

=== Voltage ranges ===

File:PicoScope 2205 inside1.jpg

2012-09-10T08:26:59Z

Jkahrs: Inside view of PicoScope 2205

== Summary ==
Inside view of PicoScope 2205
== Licensing ==
{{CC-BY-SA-3.0}}

Pico Technology PicoScope 2205

2012-09-10T08:25:30Z

Jkahrs: corrected file name of PS 2205 front photo

[[File:PicoScope 2205 front.jpg|thumb|right|PicoScope 2205.]]

The [http://www.picotech.com/picoscope2200-specifications.html Pico Technology PicoScope 2205] is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 25MHz. The max. sampling rate (one-shot) is 200 MS/s (one channel mode) or 100 MS/s (two channel mode). The max. sampling rate for repetitive signals is 4 GS/s, the max. sampling rate in continuous streaming mode is 5 MS/s.

On Linux the device is reported with '''lsusb -vvv''' as such:

Bus 002 Device 009: ID 0ce9:1007 pico Technology
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0ce9 pico Technology
idProduct 0x1007
bcdDevice 0.03
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

== Components ==

* Xilinx Spartan XC3S250E
* Cypress CY7C68013A-56PVXC
* Analog Devices AD9288
* Analog Devices AD8132
* Meder Electronics SIL05-1A72-71D
* Maxim MAX889S
* HC4052

== More photos ==

== Protocol ==

=== Firmware ===

=== Start acquisition ===

=== Sample format ===

=== End acquisition ===

=== Triggers ===

=== Voltage ranges ===

Supported hardware

2012-09-10T08:23:50Z

Jkahrs: /* Oscilloscopes */ corrected file name of PS 2205 front photo

sigrok is intended as a flexible, cross-platform, and '''hardware-independent''' software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

== Logic analyzers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Saleae Logic.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Saleae Logic]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Eeelec xla esla100.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[EE Electronics ESLA100]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:ASIX SIGMA.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ASIX SIGMA|ASIX SIGMA/SIGMA2]] is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate, and with 256Mbit on-board memory.

|-
| [[File:Openbench logic sniffer front.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Openbench Logic Sniffer]] (OLS) is a USB-based (and FPGA-based), 32-channel logic analyzer with up to 100MHz sampling rate and advanced trigger functionality. It is a fully open source device — the circuit design, VHDL code for the FPGA, firmware for the PIC microcontroller and Java-based client software are all freely available. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].

|-
| [[File:logic-shrimp-front.png|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Logic Shrimp]] is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].

|-
| [[File:Zeroplus Logic Cube.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ZEROPLUS Logic Cube LAP-C]] (16032) is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.

|-
| [[File:Chronovu la8 device.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [http://www.chronovu.com/ ChronoVu LA8] is a USB-based, 8-channel logic analyzer with up to 100MHz sampling rate.

|-
| [[File:Robomotic buglogic3.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Robomotic BugLogic 3]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Robomotic minilogic.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Robomotic MiniLogic]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Lcsoft-miniboard-front.png|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Lcsoft Mini Board]] is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Braintechnology usb lps.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Braintechnology USB-LPS]] is a USB-based, 16-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.

|-
| [[File:Cwav usbee sx.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[CWAV USBee SX]] is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.

|-
| [[File:ARMFLY MINI LOGIC PCB.JPG|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ARMFLY Mini-Logic]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Braintechnology usb interface v2x pcb front.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Braintechnology USB Interface V2.x]] is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Buspirate v3 front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Buspirate|Buspirate v3]] is a USB-based, 5-channel logic analyzer with up to 1MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol]. The Buspirate supports a logic analyzer mode and can thus be used for sample captures, however only at low speeds.

|-
| [[File:Ant18e_closed.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[RockyLogic Ant18e]] is a USB-based, 18-channel logic analyzer with up to 1GHz sampling rate.

|-
| [[File:Rockylogic ant8 device.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[RockyLogic Ant8]] is a USB-based, 8-channel logic analyzer with up to 500MHz sampling rate.

|-
| [[File:Ikalogic scanalogic2 device with probes.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Ikalogic SCANALOGIC-2 PRO]] is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate.

|-
| [[File:Microchip pickit2 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Microchip PICkit2]] is a USB-based, 3-channel logic analyzer with up to 1MHz sampling rate. The PICkit2 is actually a programmer/debugger for PIC microcontrollers, but it can also be used as logic analyzer.

|-
| [[File:Minila mockup.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[MiniLA Mockup]] is a USB-based, 32-channel logic analyzer with up to 100MHz sampling rate.

|-
| [[File:Acute_pkla1216_front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Acute PKLA-1216]] is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.

|-
| [[File:Saleae_Logic16_bottom.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Saleae Logic16]] is a USB-based, 16-channel logic analyzer with 100/50/25/12.5MHz sampling rate (at 2/4/8/16 enabled channels).

|-
| [[File:Intronix Logicport.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Intronix Logicport LA1034]] is a USB-based (and FPGA-based), 34-channel logic analyzer with up to 500MHz sampling rate.

|}

== Mixed-signal devices ==

Devices which can be used as both logic analyzer and oscilloscopes.

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:AX-Pro.JPG|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ARMFLY AX-Pro]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

'''Note:''' Only the logic analyzer functionality is supported so far, analog support is work in progress.

|-
| [[File:Esla201a.JPG|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[EE Electronics ESLA201A]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

'''Note:''' Only the logic analyzer functionality is supported so far, analog support is work in progress.

|-
| [[File:Link Instruments MSO-19 front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Link Instruments MSO-19‎]] is a USB-based, 1-channel 2GSa/s oscilloscope, 8-channel 200MSa/s logic analyzer, 100MSa/s pattern generator and a [https://en.wikipedia.org/wiki/Time-domain_reflectometer TDR].

|-
| [[File:QA100 Full.JPG|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[QuantAsylum QA100]] is a USB-based, mixed-mode oscilloscope with 12 digital inputs, 2 analog, 1 trigger and 1 audio waveform generator.

|-
| [[File:Polabs poscope basic2 device top.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[PoLabs PoScope Basic2]] is a USB-based, 16-channel logic analyzer (plus oscilloscope, signal/pattern generator, and more) with up to 8MHz sampling rate.

|-
| [[File:Rigol_VS5202D_Full.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Rigol VS5202D]] is a USB-based, 2-channel analog oscilloscope (400MSa/S, 200MHz bandwidth) and 16-channel logic analyzer (200MHz sampling rate).

|-
| [[File:Agilent_MSO7104A.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Agilent MSO7104A]] is a standalone, 4-channel mixed-signal digital storage oscilloscope (1GHz bandwidth, 4GSa/s samplerate, 16-channel logic analyzer).

|}

== Oscilloscopes ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Dso2090-case-top-small.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Hantek DSO-2090]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.

|-
| [[File:Hantek dso-5200a device front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Hantek DSO-5200A]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.

|-
| [[File:Velleman pcsu1000 pcb front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Velleman PCSU1000]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.

|-
| [[File:Picoscope 2203 front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Pico Technology PicoScope 2203]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).

|-
| [[File:PicoScope 2205 front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Pico Technology PicoScope 2205]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 100/200MS/s sampling rate (1-/2-channel one-shot mode).

|}

== Multimeters ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Mastech va18b device front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[V&A VA18B]] is a 6000 counts, CAT II (1000V) handheld digital multimeter with USB connectivity.

|-
| [[File:Mastech mas345 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[MASTECH MAS345]] is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.

|-
| [[File:Mastech m9803r device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[MASTECH M9803R]] is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity.

|-
| [[File:Peaktech 4370 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Peaktech 4370]] is a 2000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.

|-
| [[File:Uni t ut61d device.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[UNI-T UT61D]] is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:New ver.JPG|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[UNI-T UT61E]] is a 22000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Victor 70C.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Victor 70C]] is a 4000 counts, CAT II handheld digital multimeter with USB connectivity.

|-
| [[File:Voltcraft m4660a device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Voltcraft M-4660A]] is a 20000 counts, handheld digital multimeter with RS232 connectivity.

|-
| [[File:Voltcraft vc820 device.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Voltcraft VC-820]] is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Voltcraft vc840 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Voltcraft VC-840]] is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Agilent U1232A.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Agilent U123xA]] series are 6000 counts handheld digital multimeters with IR connectivity.

|-
| [[File:Escort 179 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Escort 179]] is a 10000 counts, handheld digital multimeter with RS232 connectivity.

|}

== Dataloggers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Rding temper front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[RDing TEMPer]] is a USB-based temperature logger.

|-
| [[File:Rding temper1 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[RDing TEMPer1]] is a USB-based temperature logger.

|-
| [[File:Rding temper gold device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[RDing TEMPer Gold]] is a USB-based temperature logger.

|-
| [[File:Tondaj sl-814 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Tondaj SL-814]] is a sound level meter with USB connectivity.

|-
| [[File:Uni-t ut325 front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[UNI-T UT325]] is a dual thermocouple logging thermometer.

|}

== Function generators ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Hantek DDS-3X25 top.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Hantek DDS-3X25]] is a 25MHz PC-based function generator (requires a USB connection to work).

|-
| [[File:Siglent sdg1010 device front 8116.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Siglent SDG1010]] is a 10MHz function generator with USB connectivity.

|}

== Power supplies ==

TODO

== GPIB interfaces ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Beiming s82357 device top.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Beiming S82357]] is a USB-based, hardware-implemented [[GPIB]] interface (a clone of the [http://www.home.agilent.com/agilent/product.jspx?ckey=851808&nid=-34193.426029.00&id=851808&cmpid=zzfind82357b Agilent 82357B USB/GPIB interface]).

|-
| [[File:GPIB-USB 82357B clone front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[GPIB-USB 82357B clone]] is a USB-based, hardware-implemented [[GPIB]] interface (a clone of the [http://www.home.agilent.com/agilent/product.jspx?ckey=851808&nid=-34193.426029.00&id=851808&cmpid=zzfind82357b Agilent 82357B USB/GPIB interface]).

|-
| [[File:Prologix-usb.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Prologix GPIB-USB]] a USB-based, firmware-implemented [[GPIB]] interface.

|-
| [[File:NI GPIB-ENET front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[National Instruments GPIB-ENET]] is an Ethernet-based, hardware-implemented [[GPIB]] interface.

|-
| [[File:ICS 488-USB front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[ICS 488-USB]] is a USB-based GPIB interface.

|}

== Potential other candidates ==

If you own any other logic analyzers (or oscilloscopes, multimeters, oscilloscopes, etc.) and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Contact [mailto:bert@biot.com Bert Vermeulen] and [mailto:uwe@hermann-uwe.de Uwe Hermann] if you want to help out.

__FORCETOC__

File:PicoScope 2205 front.jpg

2012-09-10T08:21:00Z

Jkahrs: PicoScope 2205 front

== Summary ==
PicoScope 2205 front
== Licensing ==
{{CC-BY-SA-3.0}}

Pico Technology PicoScope 2205

2012-09-10T08:07:57Z

Jkahrs: /* Components */ components are the same as in PS2203

[[File:Picoscope 2205 front.jpg|thumb|right|PicoScope 2205.]]

The [http://www.picotech.com/picoscope2200-specifications.html Pico Technology PicoScope 2205] is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 25MHz. The max. sampling rate (one-shot) is 200 MS/s (one channel mode) or 100 MS/s (two channel mode). The max. sampling rate for repetitive signals is 4 GS/s, the max. sampling rate in continuous streaming mode is 5 MS/s.

On Linux the device is reported with '''lsusb -vvv''' as such:

Bus 002 Device 009: ID 0ce9:1007 pico Technology
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0ce9 pico Technology
idProduct 0x1007
bcdDevice 0.03
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

== Components ==

* Xilinx Spartan XC3S250E
* Cypress CY7C68013A-56PVXC
* Analog Devices AD9288
* Analog Devices AD8132
* Meder Electronics SIL05-1A72-71D
* Maxim MAX889S
* HC4052

== More photos ==

== Protocol ==

=== Firmware ===

=== Start acquisition ===

=== Sample format ===

=== End acquisition ===

=== Triggers ===

=== Voltage ranges ===

Pico Technology PicoScope 2205

2012-09-10T07:27:35Z

Jkahrs: Initial page for PS2205 including output of 'lsusb -vvv', no photo yet

[[File:Picoscope 2205 front.jpg|thumb|right|PicoScope 2205.]]

The [http://www.picotech.com/picoscope2200-specifications.html Pico Technology PicoScope 2205] is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 25MHz. The max. sampling rate (one-shot) is 200 MS/s (one channel mode) or 100 MS/s (two channel mode). The max. sampling rate for repetitive signals is 4 GS/s, the max. sampling rate in continuous streaming mode is 5 MS/s.

On Linux the device is reported with '''lsusb -vvv''' as such:

Bus 002 Device 009: ID 0ce9:1007 pico Technology
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x0ce9 pico Technology
idProduct 0x1007
bcdDevice 0.03
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

== Components ==

== More photos ==

== Protocol ==

=== Firmware ===

=== Start acquisition ===

=== Sample format ===

=== End acquisition ===

=== Triggers ===

=== Voltage ranges ===

Supported hardware

2012-09-10T07:07:10Z

Jkahrs: /* Oscilloscopes */ Added PicoScope 2205 (no photos yet)

sigrok is intended as a flexible, cross-platform, and '''hardware-independent''' software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

== Logic analyzers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Saleae Logic.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Saleae Logic]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Eeelec xla esla100.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[EE Electronics ESLA100]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:ASIX SIGMA.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ASIX SIGMA|ASIX SIGMA/SIGMA2]] is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate, and with 256Mbit on-board memory.

|-
| [[File:Openbench logic sniffer front.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Openbench Logic Sniffer]] (OLS) is a USB-based (and FPGA-based), 32-channel logic analyzer with up to 100MHz sampling rate and advanced trigger functionality. It is a fully open source device — the circuit design, VHDL code for the FPGA, firmware for the PIC microcontroller and Java-based client software are all freely available. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].

|-
| [[File:logic-shrimp-front.png|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Logic Shrimp]] is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol].

|-
| [[File:Zeroplus Logic Cube.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ZEROPLUS Logic Cube LAP-C]] (16032) is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.

|-
| [[File:Chronovu la8 device.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [http://www.chronovu.com/ ChronoVu LA8] is a USB-based, 8-channel logic analyzer with up to 100MHz sampling rate.

|-
| [[File:Robomotic buglogic3.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Robomotic BugLogic 3]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Robomotic minilogic.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Robomotic MiniLogic]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Lcsoft-miniboard-front.png|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Lcsoft Mini Board]] is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Braintechnology usb lps.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Braintechnology USB-LPS]] is a USB-based, 16-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.

|-
| [[File:Cwav usbee sx.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[CWAV USBee SX]] is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.

|-
| [[File:ARMFLY MINI LOGIC PCB.JPG|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ARMFLY Mini-Logic]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Braintechnology usb interface v2x pcb front.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Braintechnology USB Interface V2.x]] is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.

|-
| [[File:Buspirate v3 front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Buspirate|Buspirate v3]] is a USB-based, 5-channel logic analyzer with up to 1MHz sampling rate. It uses the [http://dangerousprototypes.com/docs/The_Logic_Sniffer%27s_extended_SUMP_protocol extended SUMP protocol]. The Buspirate supports a logic analyzer mode and can thus be used for sample captures, however only at low speeds.

|-
| [[File:Ant18e_closed.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[RockyLogic Ant18e]] is a USB-based, 18-channel logic analyzer with up to 1GHz sampling rate.

|-
| [[File:Rockylogic ant8 device.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[RockyLogic Ant8]] is a USB-based, 8-channel logic analyzer with up to 500MHz sampling rate.

|-
| [[File:Ikalogic scanalogic2 device with probes.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Ikalogic SCANALOGIC-2 PRO]] is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate.

|-
| [[File:Microchip pickit2 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Microchip PICkit2]] is a USB-based, 3-channel logic analyzer with up to 1MHz sampling rate. The PICkit2 is actually a programmer/debugger for PIC microcontrollers, but it can also be used as logic analyzer.

|-
| [[File:Minila mockup.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[MiniLA Mockup]] is a USB-based, 32-channel logic analyzer with up to 100MHz sampling rate.

|-
| [[File:Acute_pkla1216_front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Acute PKLA-1216]] is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.

|-
| [[File:Saleae_Logic16_bottom.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Saleae Logic16]] is a USB-based, 16-channel logic analyzer with 100/50/25/12.5MHz sampling rate (at 2/4/8/16 enabled channels).

|-
| [[File:Intronix Logicport.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Intronix Logicport LA1034]] is a USB-based (and FPGA-based), 34-channel logic analyzer with up to 500MHz sampling rate.

|}

== Mixed-signal devices ==

Devices which can be used as both logic analyzer and oscilloscopes.

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:AX-Pro.JPG|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[ARMFLY AX-Pro]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

'''Note:''' Only the logic analyzer functionality is supported so far, analog support is work in progress.

|-
| [[File:Esla201a.JPG|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[EE Electronics ESLA201A]] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

'''Note:''' Only the logic analyzer functionality is supported so far, analog support is work in progress.

|-
| [[File:Link Instruments MSO-19 front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Link Instruments MSO-19‎]] is a USB-based, 1-channel 2GSa/s oscilloscope, 8-channel 200MSa/s logic analyzer, 100MSa/s pattern generator and a [https://en.wikipedia.org/wiki/Time-domain_reflectometer TDR].

|-
| [[File:QA100 Full.JPG|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[QuantAsylum QA100]] is a USB-based, mixed-mode oscilloscope with 12 digital inputs, 2 analog, 1 trigger and 1 audio waveform generator.

|-
| [[File:Polabs poscope basic2 device top.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[PoLabs PoScope Basic2]] is a USB-based, 16-channel logic analyzer (plus oscilloscope, signal/pattern generator, and more) with up to 8MHz sampling rate.

|-
| [[File:Rigol_VS5202D_Full.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Rigol VS5202D]] is a USB-based, 2-channel analog oscilloscope (400MSa/S, 200MHz bandwidth) and 16-channel logic analyzer (200MHz sampling rate).

|-
| [[File:Agilent_MSO7104A.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Agilent MSO7104A]] is a standalone, 4-channel mixed-signal digital storage oscilloscope (1GHz bandwidth, 4GSa/s samplerate, 16-channel logic analyzer).

|}

== Oscilloscopes ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Dso2090-case-top-small.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Hantek DSO-2090]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.

|-
| [[File:Hantek dso-5200a device front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Hantek DSO-5200A]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.

|-
| [[File:Velleman pcsu1000 pcb front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[Velleman PCSU1000]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.

|-
| [[File:Picoscope 2203 front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Pico Technology PicoScope 2203]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).

|-
| [[File:Picoscope 2205 front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Pico Technology PicoScope 2205]] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 100/200MS/s sampling rate (1-/2-channel one-shot mode).

|}

== Multimeters ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Mastech va18b device front.jpg|100px|left]]
| bgcolor="yellow" align="center" | [[File:Nuvola Orange.png|16px]] in progress
| style="vertical-align: top" | The [[V&A VA18B]] is a 6000 counts, CAT II (1000V) handheld digital multimeter with USB connectivity.

|-
| [[File:Mastech mas345 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[MASTECH MAS345]] is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.

|-
| [[File:Mastech m9803r device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[MASTECH M9803R]] is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity.

|-
| [[File:Peaktech 4370 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Peaktech 4370]] is a 2000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.

|-
| [[File:Uni t ut61d device.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[UNI-T UT61D]] is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:New ver.JPG|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[UNI-T UT61E]] is a 22000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Victor 70C.jpg|100px|left]]
| bgcolor="lime" align="center" | [[File:Nuvola OK.png|16px]] supported
| style="vertical-align: top" | The [[Victor 70C]] is a 4000 counts, CAT II handheld digital multimeter with USB connectivity.

|-
| [[File:Voltcraft m4660a device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Voltcraft M-4660A]] is a 20000 counts, handheld digital multimeter with RS232 connectivity.

|-
| [[File:Voltcraft vc820 device.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Voltcraft VC-820]] is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Voltcraft vc840 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Voltcraft VC-840]] is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.

|-
| [[File:Agilent U1232A.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Agilent U123xA]] series are 6000 counts handheld digital multimeters with IR connectivity.

|-
| [[File:Escort 179 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Escort 179]] is a 10000 counts, handheld digital multimeter with RS232 connectivity.

|}

== Dataloggers ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Rding temper front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[RDing TEMPer]] is a USB-based temperature logger.

|-
| [[File:Rding temper1 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[RDing TEMPer1]] is a USB-based temperature logger.

|-
| [[File:Rding temper gold device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[RDing TEMPer Gold]] is a USB-based temperature logger.

|-
| [[File:Tondaj sl-814 device front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Tondaj SL-814]] is a sound level meter with USB connectivity.

|-
| [[File:Uni-t ut325 front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[UNI-T UT325]] is a dual thermocouple logging thermometer.

|}

== Function generators ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Hantek DDS-3X25 top.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Hantek DDS-3X25]] is a 25MHz PC-based function generator (requires a USB connection to work).

|-
| [[File:Siglent sdg1010 device front 8116.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Siglent SDG1010]] is a 10MHz function generator with USB connectivity.

|}

== Power supplies ==

TODO

== GPIB interfaces ==

{| border="0" class="alternategrey sigroktable"
|-
!Device
!Status
!Comments

|-
| [[File:Beiming s82357 device top.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Beiming S82357]] is a USB-based, hardware-implemented [[GPIB]] interface (a clone of the [http://www.home.agilent.com/agilent/product.jspx?ckey=851808&nid=-34193.426029.00&id=851808&cmpid=zzfind82357b Agilent 82357B USB/GPIB interface]).

|-
| [[File:GPIB-USB 82357B clone front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[GPIB-USB 82357B clone]] is a USB-based, hardware-implemented [[GPIB]] interface (a clone of the [http://www.home.agilent.com/agilent/product.jspx?ckey=851808&nid=-34193.426029.00&id=851808&cmpid=zzfind82357b Agilent 82357B USB/GPIB interface]).

|-
| [[File:Prologix-usb.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[Prologix GPIB-USB]] a USB-based, firmware-implemented [[GPIB]] interface.

|-
| [[File:NI GPIB-ENET front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[National Instruments GPIB-ENET]] is an Ethernet-based, hardware-implemented [[GPIB]] interface.

|-
| [[File:ICS 488-USB front.jpg|100px|left]]
| bgcolor="orange" align="center" | [[File:Nuvola Red.png|16px]] planned
| style="vertical-align: top" | The [[ICS 488-USB]] is a USB-based GPIB interface.

|}

== Potential other candidates ==

If you own any other logic analyzers (or oscilloscopes, multimeters, oscilloscopes, etc.) and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Contact [mailto:bert@biot.com Bert Vermeulen] and [mailto:uwe@hermann-uwe.de Uwe Hermann] if you want to help out.

__FORCETOC__