sigrok - User contributions [en]

Connection parameters

2024-10-21T11:29:25Z

Bert: /* USB HID connections */

In case a device can not be [[Device discovery|autodetected]] or connection to a specific device is required, is is possible to specify the connection
explicitly as an driver option, using the "<driver-name>:conn=<connection>" syntax. See the '''README.devices''' file for details.

= Digital Multimeters =

Most multimeters use a serial connection. The corresponding [[Device cables|device cables]] either povide an RS232 connection or an USB connection
using an serial to USB-CDC or serial to USB-HID converter chip, see [[Serial port]]. Some devices are available with different data
cables. RS232 and USB-CDC (Virtual Com Port, VCP) cables use a common driver, USB HID cables need a seperate one. If a device has two drivers, the one
for RS232/VCP is typically suffixed with "-ser"

== RS232 / Virtual Com Port ==

<code>conn=<device-path></code>

<tt><device-path></tt> is an absolute path to the wanted device, e.g. <tt>/dev/ttyUSB1</tt> or <tt>/dev/ttyACM0</tt>.

<source lang="bash">
$ sigrok-cli --driver=uni-t-ut61e-ser:conn=/dev/ttyUSB0 -O analog
</source>

== USB HID connections ==

'''TODO''' This chapter needs an update. It has not yet caught up with the recent '''HIDAPI library''' approach, and '''conn=hid/''' syntax. When in doubt, check the '''README.devices''' file -- it's probably more up to date than this wiki page.

When a device driver exclusively supports HID based cables, then it usually accepts USB vendor and product ID pairs, or bus and device addresses:

<code>conn=<vendor-id>.<product-id></code>

<tt><vendor-id></tt> and <tt><product-id></tt> have to be specifid as 4 hexadecimal digits.

<code>conn=<bus-nr>.<device-address></code>

<bus-nr> is an integer between 1 and 255, <device-address> is an integer between 1 and 127. The device address changes
every time a device is reconnected. Bus number and device address can e.g. be found using <tt>lsusb</tt>.

<source lang="bash">
$ sigrok-cli --driver=uni-t-ut61e:conn=1a86.e008 -O analog
$ sigrok-cli --driver=uni-t-ut61e:conn=2.12 -O analog
</source>

When a device driver supports several different cable types, then a unified form of specifying serial connections can be used instead:

<source lang="bash">
$ sigrok-cli -d uni-t-ut61c:conn=/dev/ttyUSB0 --continuous
$ sigrok-cli -d uni-t-ut61c:conn=hid/ch9325 --continuous
</source>

Individual drivers may require that users specify the connection, or may come with builtin defaults and accept user overrides to ease their use.

= Devices using SCPI =

SCPI has several backends. For all backends but serial the backend name is the first parameter, followed by one or more
backend specific parameters.

== Serial / Virtual Com Port ==

Same syntax as for [[Connection_parameters#RS232 / Virtual Com Port|DMMs with serial connection]].

<code>conn=<device-path></code>
<source lang="bash">
$ sigrok-cli --driver=hameg-hmo:conn=/dev/ttyACM0 -O analog --frames 1
</source>

Baudrate can be set with option '''serialcomm''':

<source lang="bash">
$ sigrok-cli --driver=scpi-dmm:conn=/dev/ttyUSB0:serialcomm=115200/8n1 -O analog --frames 1
</source>

== USBTMC ==

Similar syntax as for [[Connection_parameters#USB HID connections|DMMs with USB HID datacables]].

<code>conn=usbtmc/<vendor-id>.<product-id></code>

<code>conn=usbtmc/<bus-nr>.<device-address></code>

<source lang="bash">
$ sigrok-cli --driver=hameg-hmo:conn=usbtmc/0aad.0119 -O analog --frames 1
</source>

== TCP RAW ==

<code>conn=tcp-raw/<ip-address>/<tcp-port></code>

<source lang="bash">
$ sigrok-cli --driver=hameg-hmo:conn=tcp-raw/192.168.1.20/5025 -O analog --frames 1
</source>

== Linux-GPIB ==

For GPIB devices connected via [http://linux-gpib.sourceforge.net/ linux-gpib], use the <code>libgpib</code> prefix, followed by the device name as defined in your <code>gpib.conf</code> file.

<source lang="bash">
$ sigrok-cli --driver=scpi-pps:conn=libgpib/pm2813 -O analog --samples 1
</source>

== VXI ==

Devices using a VXI-based network connection can be specified with the <code>vxi</code> prefix, followed by the hostname (or IP address). Optionally, the instrument name can be added with another <code>/</code> and the name; this defaults to <code>inst0</code>.

<source lang="bash">
$ sigrok-cli --driver=scpi-pps:conn=vxi/labps -O analog --samples 1
</source>

= Forced detection =

Sometimes unsupported device models might be covered by existing drivers, but would not match against a builtin list of known devices. Therefore the scan option <code>force_detect</code> provides a way for the users to force
the use of a driver with an unsupported device.

Right now only the Korad power supplies (driver <code>korad-kaxxxxp</code>) support the <code>force_detect</code> scan option:
<source lang="bash">
$ sigrok-cli -d korad-kaxxxxp:conn=/dev/ttyUSB0:force_detect=KORADKA3005PV2.0 --show
</source>

= Vendor specific protocols =

Most (all?) devices using a vendor specific protocol use either RS232 or a USB-to-serial converter, thus
the connection string is the same as for [[Connection_parameters#RS232 / Virtual Com Port|DMMs with serial connection]].

Developers/Release 0.8.0

2024-10-16T21:35:39Z

Bert:

This is an attempt at a checklist for the "next release" - as of 2023/10, for sigrok-cli this would be either 0.7.3 or 0.8.0 (maybe the latter would be more appropriate given that 0.7.2 was over 2 years ago ?). Other subprojects have different numbers e.g. last libsigrok was 0.5.2 .

Most of this is intended to expand on the main release guidelines here https://sigrok.org/wiki/Developers/Release_process

* {{checkbox|checked}} Get the blog to work

* what platforms "must work" ?
** linux is the most tested based on IRC traffic, but maybe we can explicitly list distros to test ?
** win : would be nice to have a list of people we can ping to get them test a build
** osx : no idea, few users (see https://github.com/sigrokproject/sigrok-util/pull/16 ,)
** *BSD : no idea, no user reports in IRC

* what currently open issues should be considered "blockers" for a release ?
** {{checkbox|checked|(Done)}} PyEval_InitThreads() deprecated in Python 3.13 see https://bugzilla.redhat.com/show_bug.cgi?id=2245598
** {{checkbox|unchecked|Possibly some other Python2 / 3 compatibility and deprecation issues ?}}
** {{checkbox|unchecked|random weird issues that always seem to come from Win* users running weird combinations of hardware / firmware, mostly USB ?}}
** {{checkbox|unchecked|-flto}} can break builds if driver list gets optimized out - see https://sigrok.org/bugzilla/show_bug.cgi?id=1433 , https://bugs.launchpad.net/ubuntu/+source/libsigrok/+bug/2025248 , https://github.com/sigrokproject/libsigrok/pull/233

* what external projects depend on sigrok components or bindings ? does it actually matter ?
** Pulseview
** smuview

Transports (this would be better presented in a matrix format with feature vs OS) :

*serial (native/USB-CDC)
*USB (non-serial)
*USB
*TCP/IP
*GPIB (probably just linux ?)
*VXI ?

Checklists copied from the template:

= libserialport-0.1.2 =

*{{checkbox|checked}} Check if all relevant PRs are merged.
*{{checkbox|checked}} Check the mailing list for relevant patches.
*{{checkbox|checked}} Check if the manpages are up-to-date.
*{{checkbox|checked}} Test that '''make distcheck''' works without errors and creates a '''.tar.gz''' file. Unpack that file somewhere.
**{{checkbox|checked}} Test that no files are missing, and no extra/unneeded files are in there (non-public header files, *.o files, and that kind of stuff).
**{{checkbox|checked}} Test that building from that unpacked directory works without errors.
**{{checkbox|checked}} Test that installing from there works.
**{{checkbox|checked}} Test that running/using the newly installed library/program works fine.
*{{checkbox|checked}} Do all of the above tests on all supported platforms if possible, e.g. Linux, Windows, Mac OS X, FreeBSD.
*{{checkbox|checked}} Write release notes (containing user-visible, important changes) in the respective NEWS file(s).
*{{checkbox|checked}} Figure out if this applies to 0.1.2 as well: https://sigrok.org/gitweb/?p=libserialport.git;a=commit;h=3fcdc9f7d5aa9bbae3041d80ab50b83e9bef182d
*{{checkbox|checked}} Increase the respective package version number.
**{{checkbox|checked}} If there were any backwards-incompatible changes in libsigrok and/or libsigrokdecode, increase the respective lib version numbers too.
**{{checkbox|checked}} Then, push your current status, including the version number change commit via '''git push'''.
*{{checkbox|checked}} Create a release branch via '''git checkout -b libserialport-0.1.2'''
**{{checkbox|checked}} Set the correct version in the Doxyfile, e.g. https://sigrok.org/gitweb/?p=libserialport.git;a=commit;h=348a6d353af8ac142f68fbf9fe0f4d070448d945
**{{checkbox|checked}} Tag the release branch via '''git tag -a "libserialport-0.1.2" -m "libserialport 0.1.2 release"'''.
**{{checkbox|checked}} Verify that the tag is placed correctly via '''git tag''' or '''gitk'''.
**{{checkbox|checked}} Switch to master and delete the release branch so it isn't pushed to the server: '''git checkout master && git branch -D libserialport-0.1.2'''
**{{checkbox|checked}} Then, push the update via '''git push --tags'''.
*{{checkbox|checked}} Now create the final tarball via '''make distcheck''' as described above, place it in apache/download/source/libserialport and set owner/group accordingly.
*{{checkbox|checked}} Update https://sigrok.org/wiki/Downloads#Releases with the new link.
*{{checkbox|checked}} Announce the new release in the blog, then purge the wiki page to force an update of the NEWS section: https://sigrok.org/w/index.php?title=Main_Page&action=purge.
*{{checkbox|checked}} Announce the new release on the mailing list with an [ANNOUNCE] prefix in the subject line.
*{{checkbox|checked}} Create a github release at https://github.com/sigrokproject/libserialport/releases with the content of NEWS and the tarball attached.

= libsigrok =

*{{checkbox|unchecked}} Check if all relevant PRs are merged.
*{{checkbox|unchecked}} Check the mailing list for relevant patches.
*{{checkbox|unchecked}} Check if the manpages are up-to-date.
*{{checkbox|unchecked}} Test that '''make distcheck''' works without errors and creates a '''.tar.gz''' file. Unpack that file somewhere.
**{{checkbox|unchecked}} Test that no files are missing, and no extra/unneeded files are in there (non-public header files, *.o files, and that kind of stuff).
**{{checkbox|unchecked}} Test that building from that unpacked directory works without errors.
**{{checkbox|unchecked}} Test that installing from there works.
**{{checkbox|unchecked}} Test that running/using the newly installed library/program works fine.
**{{checkbox|unchecked}} Test at least the demo driver, one hardware LA, one non-default input- and output driver, and one protocol decoder. The more tests the better, of course.
*{{checkbox|unchecked}} Do all of the above tests on all supported platforms if possible, e.g. Linux, Windows, Mac OS X, FreeBSD.
*{{checkbox|unchecked}} Write release notes (containing user-visible, important changes) in the respective NEWS file(s).
*{{checkbox|unchecked}} Increase the respective package version number.
**{{checkbox|unchecked}} If there were any backwards-incompatible changes in libsigrok and/or libsigrokdecode, increase the respective lib version numbers too.
**{{checkbox|unchecked}} Then, push your current status, including the version number change commit via '''git push'''.
*{{checkbox|unchecked}} If everything works OK, tag the new release in git via (for example): '''git tag -a "libsigrok-0.1.0" -m "libsigrok 0.1.0 release" <hash>'''. Replace '''<hash>''' with the commit hash that should be tagged.
**{{checkbox|unchecked}} Verify that the tag is placed correctly via '''git tag''' or '''gitk'''.
**{{checkbox|unchecked}} Then, push it via '''git push --tags'''.
*{{checkbox|unchecked}} Now create the final tarball via '''make distcheck''' as described above, and upload it.
*{{checkbox|unchecked}} Announce the new release in the blog and on the mailing list.

= libsigrokdecode =

*{{checkbox|unchecked}} Check if all relevant PRs are merged.
*{{checkbox|unchecked}} Check the mailing list for relevant patches.
*{{checkbox|unchecked}} Check if the manpages are up-to-date.
*{{checkbox|unchecked}} Test that '''make distcheck''' works without errors and creates a '''.tar.gz''' file. Unpack that file somewhere.
**{{checkbox|unchecked}} Test that no files are missing, and no extra/unneeded files are in there (non-public header files, *.o files, and that kind of stuff).
**{{checkbox|unchecked}} Test that building from that unpacked directory works without errors.
**{{checkbox|unchecked}} Test that installing from there works.
**{{checkbox|unchecked}} Test that running/using the newly installed library/program works fine.
**{{checkbox|unchecked}} Test at least the demo driver, one hardware LA, one non-default input- and output driver, and one protocol decoder. The more tests the better, of course.
*{{checkbox|unchecked}} Do all of the above tests on all supported platforms if possible, e.g. Linux, Windows, Mac OS X, FreeBSD.
*{{checkbox|unchecked}} Write release notes (containing user-visible, important changes) in the respective NEWS file(s).
*{{checkbox|unchecked}} Increase the respective package version number.
**{{checkbox|unchecked}} If there were any backwards-incompatible changes in libsigrok and/or libsigrokdecode, increase the respective lib version numbers too.
**{{checkbox|unchecked}} Then, push your current status, including the version number change commit via '''git push'''.
*{{checkbox|unchecked}} If everything works OK, tag the new release in git via (for example): '''git tag -a "libsigrok-0.1.0" -m "libsigrok 0.1.0 release" <hash>'''. Replace '''<hash>''' with the commit hash that should be tagged.
**{{checkbox|unchecked}} Verify that the tag is placed correctly via '''git tag''' or '''gitk'''.
**{{checkbox|unchecked}} Then, push it via '''git push --tags'''.
*{{checkbox|unchecked}} Now create the final tarball via '''make distcheck''' as described above, and upload it.
*{{checkbox|unchecked}} Announce the new release in the blog and on the mailing list.

= sigrok-firmware =

*{{checkbox|unchecked}} Check if all relevant PRs are merged.
*{{checkbox|unchecked}} Check the mailing list for relevant patches.
*{{checkbox|unchecked}} Check if the manpages are up-to-date.
*{{checkbox|unchecked}} Test that '''make distcheck''' works without errors and creates a '''.tar.gz''' file. Unpack that file somewhere.
**{{checkbox|unchecked}} Test that no files are missing, and no extra/unneeded files are in there (non-public header files, *.o files, and that kind of stuff).
**{{checkbox|unchecked}} Test that building from that unpacked directory works without errors.
**{{checkbox|unchecked}} Test that installing from there works.
**{{checkbox|unchecked}} Test that running/using the newly installed library/program works fine.
**{{checkbox|unchecked}} Test at least the demo driver, one hardware LA, one non-default input- and output driver, and one protocol decoder. The more tests the better, of course.
*{{checkbox|unchecked}} Do all of the above tests on all supported platforms if possible, e.g. Linux, Windows, Mac OS X, FreeBSD.
*{{checkbox|unchecked}} Write release notes (containing user-visible, important changes) in the respective NEWS file(s).
*{{checkbox|unchecked}} Increase the respective package version number.
**{{checkbox|unchecked}} If there were any backwards-incompatible changes in libsigrok and/or libsigrokdecode, increase the respective lib version numbers too.
**{{checkbox|unchecked}} Then, push your current status, including the version number change commit via '''git push'''.
*{{checkbox|unchecked}} If everything works OK, tag the new release in git via (for example): '''git tag -a "libsigrok-0.1.0" -m "libsigrok 0.1.0 release" <hash>'''. Replace '''<hash>''' with the commit hash that should be tagged.
**{{checkbox|unchecked}} Verify that the tag is placed correctly via '''git tag''' or '''gitk'''.
**{{checkbox|unchecked}} Then, push it via '''git push --tags'''.
*{{checkbox|unchecked}} Now create the final tarball via '''make distcheck''' as described above, and upload it.
*{{checkbox|unchecked}} In case of a client program (sigrok-cli / PV), create all pre-built binaries, upload them and make them available on the wiki for future reference.
*{{checkbox|unchecked}} Announce the new release in the blog and on the mailing list.

= sigrok-cli =

*{{checkbox|unchecked}} Check if all relevant PRs are merged.
*{{checkbox|unchecked}} Check the mailing list for relevant patches.
*{{checkbox|unchecked}} Check if the manpages are up-to-date.
*{{checkbox|unchecked}} Test that '''make distcheck''' works without errors and creates a '''.tar.gz''' file. Unpack that file somewhere.
**{{checkbox|unchecked}} Test that no files are missing, and no extra/unneeded files are in there (non-public header files, *.o files, and that kind of stuff).
**{{checkbox|unchecked}} Test that building from that unpacked directory works without errors.
**{{checkbox|unchecked}} Test that installing from there works.
**{{checkbox|unchecked}} Test that running/using the newly installed library/program works fine.
**{{checkbox|unchecked}} Test at least the demo driver, one hardware LA, one non-default input- and output driver, and one protocol decoder. The more tests the better, of course.
*{{checkbox|unchecked}} Do all of the above tests on all supported platforms if possible, e.g. Linux, Windows, Mac OS X, FreeBSD.
*{{checkbox|unchecked}} Write release notes (containing user-visible, important changes) in the respective NEWS file(s).
*{{checkbox|unchecked}} Increase the respective package version number.
**{{checkbox|unchecked}} If there were any backwards-incompatible changes in libsigrok and/or libsigrokdecode, increase the respective lib version numbers too.
**{{checkbox|unchecked}} Then, push your current status, including the version number change commit via '''git push'''.
*{{checkbox|unchecked}} If everything works OK, tag the new release in git via (for example): '''git tag -a "libsigrok-0.1.0" -m "libsigrok 0.1.0 release" <hash>'''. Replace '''<hash>''' with the commit hash that should be tagged.
**{{checkbox|unchecked}} Verify that the tag is placed correctly via '''git tag''' or '''gitk'''.
**{{checkbox|unchecked}} Then, push it via '''git push --tags'''.
*{{checkbox|unchecked}} Now create the final tarball via '''make distcheck''' as described above, and upload it.
*{{checkbox|unchecked}} In case of a client program (sigrok-cli / PV), create all pre-built binaries, upload them and make them available on the wiki for future reference.
*{{checkbox|unchecked}} Announce the new release in the blog and on the mailing list.

= PulseView =

*{{checkbox|unchecked}} Check if all relevant PRs are merged.
*{{checkbox|unchecked}} Check the mailing list for relevant patches.
*{{checkbox|unchecked}} Check if the manpages are up-to-date.
*{{checkbox|unchecked}} Test that '''make distcheck''' works without errors and creates a '''.tar.gz''' file. Unpack that file somewhere.
**{{checkbox|unchecked}} Test that no files are missing, and no extra/unneeded files are in there (non-public header files, *.o files, and that kind of stuff).
**{{checkbox|unchecked}} Test that building from that unpacked directory works without errors.
**{{checkbox|unchecked}} Test that installing from there works.
**{{checkbox|unchecked}} Test that running/using the newly installed library/program works fine.
**{{checkbox|unchecked}} Test at least the demo driver, one hardware LA, one non-default input- and output driver, and one protocol decoder. The more tests the better, of course.
*{{checkbox|unchecked}} Do all of the above tests on all supported platforms if possible, e.g. Linux, Windows, Mac OS X, FreeBSD.
*{{checkbox|unchecked}} Write release notes (containing user-visible, important changes) in the respective NEWS file(s).
*{{checkbox|unchecked}} Increase the respective package version number.
**{{checkbox|unchecked}} If there were any backwards-incompatible changes in libsigrok and/or libsigrokdecode, increase the respective lib version numbers too.
**{{checkbox|unchecked}} Then, push your current status, including the version number change commit via '''git push'''.
*{{checkbox|unchecked}} If everything works OK, tag the new release in git via (for example): '''git tag -a "libsigrok-0.1.0" -m "libsigrok 0.1.0 release" <hash>'''. Replace '''<hash>''' with the commit hash that should be tagged.
**{{checkbox|unchecked}} Verify that the tag is placed correctly via '''git tag''' or '''gitk'''.
**{{checkbox|unchecked}} Then, push it via '''git push --tags'''.
*{{checkbox|unchecked}} Now create the final tarball via '''make distcheck''' as described above, and upload it.
*{{checkbox|unchecked}} In case of a client program (sigrok-cli / PV), create all pre-built binaries, upload them and make them available on the wiki for future reference.
*{{checkbox|unchecked}} Announce the new release in the blog and on the mailing list.

Supported hardware

2024-10-15T16:41:05Z

Bert: /* Function generators */

sigrok is intended as a flexible, cross-platform, and '''hardware-independent''' software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) in the [http://sigrok.org/gitweb/?p=libsigrok.git;a=summary latest git version of libsigrok] (fewer devices might be supported in tarball releases) and devices we plan to support in the future. The [http://sigrok.org/gitweb/?p=libsigrok.git;a=blob_plain;f=README.devices README.devices] document discusses more device or platform specific details, physical transports, dependencies on firmware and external tools, how to enable communication modes, etc.

The lists are sorted by category ([[File:Nuvola OK.png|16px]] supported: [[:Category:Supported|{{PAGESINCATEGORY:Supported|pages}}]], [[File:Nuvola Orange.png|16px]] in progress: [[:Category:In progress|{{PAGESINCATEGORY:In progress|pages}}]], [[File:Nuvola Red.png|16px]] planned: [[:Category:Planned|{{PAGESINCATEGORY:Planned|pages}}]]), and alphabetically within those categories.

== Logic analyzers ==

<gallery widths="100px" heights="100px">
File:128axc-usbee-axpro-clone-Overview.jpg|link=128axc-based USBee AX-Pro clone|[[File:Nuvola OK.png|16px]] [[128axc-based USBee AX-Pro clone|128axc-based USBee AX-Pro clone ]] (8ch, 24MHz)
File:ARMFLY MINI LOGIC.png|link=ARMFLY Mini-Logic|[[File:Nuvola OK.png|16px]] [[ARMFLY Mini-Logic]] (8ch, 24MHz)
File:ASIX Omega.png|link=ASIX OMEGA|[[File:Nuvola OK.png|16px]] [[ASIX OMEGA]] (16ch, 400MHz)
File:ASIX SIGMA 2.png|link=ASIX SIGMA|[[File:Nuvola OK.png|16px]] [[ASIX SIGMA]] (16ch, 200MHz)
File:AZ-Delivery logic analyzer.png|link=AZDelivery Logic Analyzer|[[File:Nuvola OK.png|16px]] [[AZDelivery Logic Analyzer | AZ-Delivery Logic Analyzer]]] (8ch, 24MHz)
File:BeagleLogic.jpg|link=BeagleLogic|[[File:Nuvola OK.png|16px]] [[BeagleLogic]] (12(max 14)ch, 100MHz)
File:Braintechnology_usb_interface_v26.png|link=Braintechnology USB Interface V2.x|[[File:Nuvola OK.png|16px]] [[Braintechnology USB Interface V2.x]] (8/16ch, 24/12MHz)
File:Braintechnology_usb_lps.png|link=Braintechnology USB-LPS|[[File:Nuvola OK.png|16px]] [[Braintechnology USB-LPS]] (8/16ch, 24/12MHz)
File:Chronovu la8 front.png|link=ChronoVu LA8|[[File:Nuvola OK.png|16px]] [[ChronoVu LA8]] (8ch, 100MHz)
File:Chronovu la16.png|link=ChronoVu LA16|[[File:Nuvola OK.png|16px]] [[ChronoVu LA16]] (16ch, 200MHz)
File:Cwav_usbee_sx.png|link=CWAV USBee SX|[[File:Nuvola OK.png|16px]] [[CWAV USBee SX]] (8ch, 24MHz)
File:Buspirate_v3.png|link=Dangerous Prototypes Buspirate|[[File:Nuvola OK.png|16px]] [[Dangerous Prototypes Buspirate]] (5ch, 1MHz)
File:Dangerous prototypes irtoy mugshot.png|link=Dangerous Prototypes USB IR Toy|[[File:Nuvola OK.png|16px]] [[Dangerous Prototypes USB IR Toy]] (1ch, 10kHz)
File:DSLogic.png|link=DreamSourceLab DSLogic|[[File:Nuvola OK.png|16px]] [[DreamSourceLab DSLogic]] (16ch, 400MHz)
File:DSLogic.png|link=DreamSourceLab DSLogic Basic|[[File:Nuvola OK.png|16px]] [[DreamSourceLab DSLogic Basic]] (16ch, 100MHz)
File:DSLogic.png|link=DreamSourceLab DSLogic Plus|[[File:Nuvola OK.png|16px]] [[DreamSourceLab DSLogic Plus]] (16ch, 400MHz)
File:DSLogic.png|link=DreamSourceLab DSLogic Pro|[[File:Nuvola OK.png|16px]] [[DreamSourceLab DSLogic Pro]] (16ch, 400MHz)
File:Eeelec xla esla100.png|link=EE Electronics ESLA100|[[File:Nuvola OK.png|16px]] [[EE Electronics ESLA100]] (8ch, 24MHz)
File:Chronovu la8 ftdi ft245rl.jpg|link=FTDI-LA|[[File:Nuvola OK.png|16px]] [[FTDI-LA]] (8ch, ~10MHz)
File:jtagulator-transparent.png|link=JTAGulator|[[File:Nuvola OK.png|16px]][[JTAGulator | Grand Idea Studio JTAGulator]] (24ch, 1.2MHz)
File:Greatfet_mugshot.png|link=GreatFET One|[[File:Nuvola OK.png|16px]] [[GreatFET One]] (8/4/2/1ch, 40.8/68/102/204MHz)
File:Hantek 4032l mugshot.png|link=Hantek 4032L|[[File:Nuvola OK.png|16px]] [[Hantek 4032L]] (32ch, 400MHz)
File:Hantek 6022be mugshot.png|link=Hantek 6022BL|[[File:Nuvola OK.png|16px]] [[Hantek 6022BL]] (8ch, 24MHz)
File:Hobby components hctest0006 mugshot.png|link=Hobby Components HCTEST0006|[[File:Nuvola OK.png|16px]] [[Hobby Components HCTEST0006]] (8ch, 24MHz)
File:Ikalogic_scanalogic2.png|link=IKALOGIC Scanalogic-2|[[File:Nuvola OK.png|16px]] [[IKALOGIC Scanalogic-2]] (4ch, 20MHz)
File:Ikalogic scanaplus mugshot.png|link=IKALOGIC ScanaPLUS|[[File:Nuvola OK.png|16px]] [[IKALOGIC ScanaPLUS]] (9ch, 100MHz)
File:Kingst la2016 mugshot.png|link=Kingst LA2016|[[File:Nuvola OK.png|16px]] [[Kingst LA2016]] (16ch, 200MHz)
File:Kingst-la5016-mugshot.png|link=Kingst LA5016|[[File:Nuvola OK.png|16px]] [[Kingst LA5016]] (16ch, 500MHz)
File:Kingst-la5032-mugshot.jpg|link=Kingst LA5032|[[File:Nuvola OK.png|16px]] [[Kingst LA5032]] (32ch, 500MHz)
File:Kingst kqs3506 la16100.png|link=KingST KQS3506-LA16100|[[File:Nuvola OK.png|16px]] [[KingST KQS3506-LA16100]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
File:Lcsoft-miniboard-front.png|link=Lcsoft Mini Board|[[File:Nuvola OK.png|16px]] [[Lcsoft Mini Board]] (8/16ch, 24/12MHz)
File:Lecroy logicstudio16 mugshot.png|link=LeCroy LogicStudio|[[File:Nuvola OK.png|16px]] [[LeCroy LogicStudio]] (8/16ch, 1GHz/500MHz)
File:logic-shrimp-front.png|link=Logic Shrimp|[[File:Nuvola OK.png|16px]] [[Logic Shrimp]] (4ch, 20MHz)
File:Mcu123 saleae logic clone.png|link=MCU123 Saleae Logic clone|[[File:Nuvola OK.png|16px]] [[MCU123 Saleae Logic clone]] (8ch, 24MHz)
File:Meilhaus logian 16l mugshot.png|link=Meilhaus Logian-16L|[[File:Nuvola OK.png|16px]] [[Meilhaus Logian-16L]] (16ch, 200MHz)
File:Microchip_pickit2.png|link=Microchip PICkit2|[[File:Nuvola OK.png|16px]] [[Microchip PICkit2]] (3ch, 1MHz)
File:Usbee_ax_clone_front.png|link=MCU123 USBee AX Pro clone|[[File:Nuvola OK.png|16px]] [[MCU123 USBee AX Pro clone]] (8ch, 24MHz)
File:Mcupro_Logic16_overview.png|link=mcupro Logic16 clone|[[File:Nuvola OK.png|16px]] [[mcupro Logic16 clone]] (16ch, 100MHz)
File:Noname_saleae_logic_clone_mugshot.png|link=Noname Saleae Logic clone|[[File:Nuvola OK.png|16px]] [[Noname Saleae Logic clone|Noname Saleae Logic clone]] (8ch, 24MHz)
File:Openbench logic sniffer front.png|link=Openbench Logic Sniffer|[[File:Nuvola OK.png|16px]] [[Openbench Logic Sniffer]] (32ch, 100MHz)
File:Prist akip 9101 mugshot.png|link=Prist AKIP-9101|[[File:Nuvola OK.png|16px]] [[Prist AKIP-9101]] (16ch, 200MHz)
File:Robomotic buglogic3.png|link=Robomotic BugLogic 3|[[File:Nuvola OK.png|16px]] [[Robomotic BugLogic 3]] (8ch, 24MHz)
File:Robomotic_minilogic.png|link=Robomotic MiniLogic|[[File:Nuvola OK.png|16px]] [[Robomotic MiniLogic]] (8ch, 24MHz)
File:Saleae Logic.png|link=Saleae Logic|[[File:Nuvola OK.png|16px]] [[Saleae Logic]] (8ch, 24MHz)
File:Saleae_Logic16_bottom.png|link=Saleae Logic16|[[File:Nuvola OK.png|16px]] [[Saleae Logic16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
File:Saanlima Pipistrello-OLS.png|link=Saanlima Pipistrello OLS|[[File:Nuvola OK.png|16px]] [[Saanlima Pipistrello OLS]] (32ch, 100MHz)
File:Sigrok_logo_no_text_transparent_512.png|link=SUMP compatibles|[[File:Nuvola OK.png|16px]] [[SUMP compatibles]]
File:Sysclk lwla1016.png|link=Sysclk LWLA1016|[[File:Nuvola OK.png|16px]] [[Sysclk LWLA1016]] (16ch, 100MHz)
File:Sysclk lwla1034 mugshot.png|link=Sysclk LWLA1034|[[File:Nuvola OK.png|16px]] [[Sysclk LWLA1034]] (34ch, 125MHz)
File:Sysclk sla5032 mugshot.png|link=Sysclk SLA5032|[[File:Nuvola OK.png|16px]] [[Sysclk SLA5032]] (32ch, 500MHz)
File:VKTECH_thumb.jpg|link=VKTECH_saleae_clone|[[File:Nuvola OK.png|16px]] [[VKTECH_saleae_clone|VKTECH saleae clone]] (8ch, 24MHz)
File:Wayengineer saleae16.png|link=WayEngineer Saleae16|[[File:Nuvola OK.png|16px]] [[WayEngineer Saleae16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
File:Zeroplus Logic Cube.png|link=ZEROPLUS Logic Cube LAP-C(16032)|[[File:Nuvola OK.png|16px]] [[ZEROPLUS Logic Cube LAP-C(16032)]] (16ch, 100MHz)
File:Zeroplus Logic Cube.png|link=ZEROPLUS Logic Cube LAP-C(322000)|[[File:Nuvola OK.png|16px]] [[ZEROPLUS Logic Cube LAP-C(322000)]] (32ch, 200MHz)
File:Zeroplus_lap-16128u.png|link=ZEROPLUS LAP-16128U|[[File:Nuvola OK.png|16px]] [[ZEROPLUS LAP-16128U]] (16ch, 200MHz)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Acute_pkla1216.png|link=Acute PKLA-1216|[[File:Nuvola Red.png|16px]] [[Acute PKLA-1216]] (16ch, 200MHz)
File:Arduino_Uno-R3.jpg|link=Arduino|[[File:Nuvola Orange.png|16px]] [[Arduino]] (6ch, 4MHz)
File:Sigrok_logo_no_text_transparent_512.png|link=Codethink Interrogizer|[[File:Nuvola Red.png|16px]] [[Codethink Interrogizer]] (16ch, 200kHz)
File:IMG 20191206 105430.jpg|link=CoLA|[[File:Nuvola Red.png|16px]] [[CoLA]] (96/48/24ch, 25/50/100MHz)
File:DSLogic U3Pro16.png|link=DreamSourceLab DSLogic U3Pro16|[[File:Nuvola Red.png|16px]] [[DreamSourceLab DSLogic U3Pro16]] (16ch, 1GHz)
File:Hsa-logic.png|link=HSA Logic|[[File:Nuvola Red.png|16px]] [[HSA Logic]] (8ch, 6.25MHz)
File:Ideofy_la_08.png|link=Ideofy LA-08|[[File:Nuvola Red.png|16px]] [[Ideofy LA-08]] (8ch, 96/60/30MHz @ 2/4/8ch)
File:Intronix Logicport.png|link=Intronix Logicport LA1034|[[File:Nuvola Red.png|16px]] [[Intronix Logicport LA1034]] (34ch, 500MHz)
File:Sigrok_logo_no_text_transparent_512.png|link=Link Instruments LA-5580|[[File:Nuvola Red.png|16px]] [[Link Instruments LA-5580]] (80ch, 500MHz)
File:Minila parport.png|link=MiniLA|[[File:Nuvola Red.png|16px]] [[MiniLA]] (32ch, 100MHz)
File:Minila_mockup.png|link=MiniLA Mockup|[[File:Nuvola Red.png|16px]] [[MiniLA Mockup]] (32ch, 100MHz)
File:Noname_la16_mugshot.png|link=Noname LA16|[[File:Nuvola Red.png|16px]] [[Noname LA16]] (16ch, 100MHz)
File:Noname xl logic16 100m mugshot.png|link=Noname XL-LOGIC16-100M|[[File:Nuvola Orange.png|16px]] [[Noname XL-LOGIC16-100M]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
File:Rockylogic_ant8.png|link=RockyLogic Ant8|[[File:Nuvola Red.png|16px]] [[RockyLogic Ant8]] (8ch, 500MHz)
File:RockyLogic Ant18e.png|link=RockyLogic Ant18e|[[File:Nuvola Red.png|16px]] [[RockyLogic Ant18e]] (8ch, 1GHz)
File:Sysclk lwla2034 mugshot.png|link=Sysclk LWLA2034|[[File:Nuvola Red.png|16px]] [[Sysclk LWLA2034]] (34ch, 200MHz)
File:Techtools_digiview_dv1-100.png|link=TechTools DigiView DV1-100|[[File:Nuvola Red.png|16px]] [[TechTools DigiView DV1-100]] (18ch, 100MHz)
File:Tektronix TLA5204 1000.png|link=Tektronix TLA520X|[[File:Nuvola Red.png|16px]] [[Tektronix TLA520X]] (128ch, 2Ghz)
File:Xmos xtag2.png|link=XMOS XTAG-2|[[File:Nuvola Red.png|16px]] [[XMOS XTAG-2]] (?ch, 50MHz)
File:Zlg_la1032.png|link=ZLG LA1032|[[File:Nuvola Red.png|16px]] [[ZLG LA1032]] (32ch, 100MHz)
</gallery>

== Mixed-signal devices ==

<gallery widths=105px heights=105px>
File:Armfly_ax_pro.png|link=ARMFLY AX-Pro|[[File:Nuvola OK.png|16px]] [[ARMFLY AX-Pro]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Sysclk ax pro mugshot.png|link=Sysclk AX-Pro|[[File:Nuvola OK.png|16px]] [[Sysclk AX-Pro]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Esla201a.png|link=EE Electronics ESLA201A|[[File:Nuvola OK.png|16px]] [[EE Electronics ESLA201A]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Ht usbee axpro v5 mugshot.png|link=HT USBee-AxPro|[[File:Nuvola OK.png|16px]] [[HT USBee-AxPro]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:LeCroy_WaveSurfer_24Xs-A_front.png|link=LeCroy oscilloscope series|[[File:Nuvola OK.png|16px]] [[LeCroy oscilloscope series]] (various)
File:Noname lht00su1 mugshot.png|link=Noname LHT00SU1|[[File:Nuvola OK.png|16px]] [[Noname LHT00SU1]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Rigol DS1052E.png|link=Rigol DS1000 series|[[File:Nuvola OK.png|16px]] [[Rigol DS1000 series|Rigol DS1000D series]] (16ch, 2ch analog, 50-150MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Rigol DS4000 series|[[File:Nuvola OK.png|16px]] [[Rigol DS4000 series]] (0/16ch , 2-4ch analog, 2-4GS/s, 100MHz/200MHz/350MHz/500MHz BW)
File:Rigol_VS5202D.png|link=Rigol VS5000 series|[[File:Nuvola OK.png|16px]] [[Rigol VS5000 series|Rigol VS5000D series]] (16ch, 2ch analog, 20-200MHz BW)
File:RS HMO1002.png|link=Rohde&Schwarz HMO1002 series|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz HMO1002 series]] (2ch, 1GS/s, 50-100MHz BW)
File:HMO3000.jpg|link=Rohde&Schwarz HMO3000 series|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz HMO 3000 series]] (16ch, 2/4ch analog, 4GS/s, 300-500MHz BW)
File:RTA4000.jpg|link=Rohde&Schwarz RT series|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz RT series]] (8/16ch, 2/4ch analog, 2-5GS/s, 50MHz-1GHz BW)
File:Saleae Logic Pro 16 bottom.jpg|link=Saleae Logic Pro 16|[[File:Nuvola OK.png|16px]] [[Saleae Logic Pro 16]] (4/16ch, 500/100MHz; 16ch analog, 50MSa/s, 5MHz BW)
File:Siglent_SDS1202X-E_front.png|link=Siglent SDS1000X series|[[File:Nuvola OK.png|16px]] [[Siglent SDS1000X series]] (16ch, 2ch analog, 1GSa/s, 200/100MHz BW)
File:sds2304x-mugshot.png|link=Siglent SDS2000X series|[[File:Nuvola OK.png|16px]] [[Siglent SDS2000X series]] (16ch, 2/4ch analog, 2GSa/s, 300/200/150/100/70MHz BW)
File:Yokogawa DLM2000 front.png|link=Yokogawa DLM2000 series|[[File:Nuvola OK.png|16px]] [[Yokogawa DLM2000 series]] (8ch, 2/4ch analog, 2.5GSa/s, 200/350/500MHz BW)
File:Xzl studio ax mugshot.png|link=XZL_Studio AX|[[File:Nuvola OK.png|16px]] [[XZL_Studio AX]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Xzl studio-dx mugshot.png|link=XZL_Studio DX|[[File:Nuvola OK.png|16px]] [[XZL_Studio DX]] (16ch, 24MHz; 2ch analog), Analog not supported
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Agilent_MSO7104A.png|link=Agilent MSO7104A|[[File:Nuvola Red.png|16px]] [[Agilent MSO7104A]] (16ch, ?; 4ch analog, 2GSa/s, 1GHz BW)
File:BitScope BS10.png|link=BitScope BS10|[[File:Nuvola Red.png|16px]] [[BitScope BS10]] (8ch, 40MHz; 2ch analog, 20MSa/s, ? BW)
File:Digilent_analog_discovery.png|link=Digilent Analog Discovery|[[File:Nuvola Red.png|16px]] [[Digilent Analog Discovery]] (16ch, 100MHz; 2ch analog, 100MSa/s, 5MHz BW)
File:Hantek_1008C.png|link=Hantek 1008C|[[File:Nuvola Red.png|16px]] [[Hantek 1008C]] (8ch)
File:Ht usbee dxpro mugshot.png|link=HT USBee-DxPro|[[File:Nuvola Red.png|16px]] [[HT USBee-DxPro]] (16ch, 24MHz; 2ch analog)
File:Lab nation smartscope mugshot.png|link=LabNation SmartScope|[[File:Nuvola Red.png|16px]] [[LabNation SmartScope]] (8ch, 100MHz; 2ch analog, 100MSa/s, 45MHz BW)
File:Link Instruments MSO-19 front.png|link=Link Instruments MSO-19|[[File:Nuvola Red.png|16px]] [[Link Instruments MSO-19]] (8ch, 200MHz; 1ch analog, 200MSa/s, 60MHz BW)
File:Meilhaus_mephisto_scope1.png|link=Meilhaus MEphisto Scope1|[[File:Nuvola Red.png|16px]] [[Meilhaus MEphisto Scope1]] (16ch, 100kHz; 2ch analog, 1MSa/s, 500kHz BW)
File:Polabs_poscope_basic2.png|link=PoLabs PoScope Basic2|[[File:Nuvola Red.png|16px]] [[PoLabs PoScope Basic2]] (16ch, 8MHz; 2ch analog, 200kSa/s, ? BW)
File:QuantAsylum QA100.png|link=QuantAsylum QA100|[[File:Nuvola Red.png|16px]] [[QuantAsylum QA100]] (12ch; 2ch analog)
File:Sigrok_logo_no_text_transparent_512.png|link=Rigol MSO5000 Series|[[File:Nuvola Orange.png|16px]] [[Rigol MSO5000 Series]] (16ch, 2-4ch analog, 70-350MHz BW)
File:Saleae_Logic8_case_bottom.jpg|link=Saleae Logic8|[[File:Nuvola Red.png|16px]] [[Saleae Logic8]] (3/6/7/8ch, 100/50/40/25MHz; 8ch analog, 10MSa/s, 1MHz BW)
File:Saleae_logic_pro_8-bottom.png|link=Saleae Logic Pro 8|[[File:Nuvola Red.png|16px]] [[Saleae Logic Pro 8]] (4/8ch, 500/100MHz; 8ch analog, 50MSa/s, 5MHz BW)
File:Picoscope 3205D MSO fp.jpg|link=Pico Technology PicoScope 3205D MSO|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 3205D MSO]] (16ch, 100MHz; 2ch analog, 1/0.5GS/s, 100MHz BW)
File:DSO3254A.jpg|link=Hantek DSO3254A|[[File:Nuvola Red.png|16px]] [[Hantek DSO3254A]] (16ch, 250MHz; 4ch analog, 1GS/s, 250MHz BW; 1 ch func/arb generator, 200MHz)

</gallery>

== Oscilloscopes ==

<gallery widths=100px heights=100px>
File:Agilent DSO1014A.png|link=Agilent DSO1000 series|[[File:Nuvola OK.png|16px]] [[Agilent DSO1000 series]] (2-4ch, 2GS/s, 60-200MHz BW)
File:Fluke_Scopemeter_199B.png|link=Fluke ScopeMeter 199B|[[File:Nuvola OK.png|16px]] [[Fluke ScopeMeter 199B]] (2ch, 2.5GS/s, 200MHz BW)
File:Voltcraft dso-6060c mugshot.png|link=GW Instek GDS-800 series|[[File:Nuvola OK.png|16px]] [[GW Instek GDS-800 series]] (2ch, 25GS/s, 60-250MHz BW)
File:Hameg HMO2024.png|link=Hameg HMO compact series|[[File:Nuvola OK.png|16px]] [[Hameg HMO compact series]] (2-4ch, 2GS/s, 70-200MHz BW)
File:Hantek 6022be mugshot.png|link=Hantek 6022BE|[[File:Nuvola OK.png|16px]] [[Hantek 6022BE]] (2ch, 48MS/s, 20MHz BW)
File:Hantek DSO-2090.png|link=Hantek DSO-2090|[[File:Nuvola OK.png|16px]] [[Hantek DSO-2090]] (2ch, 100MS/s, 40MHz)
File:Hung chang dso 2100 mugshot.png|link=Hung-Chang_DSO-2100|[[File:Nuvola OK.png|16px]] [[Hung-Chang DSO-2100]] (2ch, 100MS/s, 30MHz BW)
File:Rigol DS1052E.png|link=Rigol DS1000 series|[[File:Nuvola OK.png|16px]] [[Rigol DS1000 series|Rigol DS1000E series]] (2ch, 1GS/s, 50-150MHz BW)
File:Rigol DS1074Z front.png|link=Rigol DS1000Z series|[[File:Nuvola OK.png|16px]] [[Rigol DS1000Z series|Rigol DS1000Z series]] (4ch, 1GS/s, 50-100MHz BW)
File:Rigol-ds2072 mugshot.png|link=Rigol DS2000 series|[[File:Nuvola OK.png|16px]] [[Rigol DS2000 series]] (2ch, 2GS/s, 70-200MHz BW)
File:Rigol_VS5202D.png|link=Rigol VS5000 series|[[File:Nuvola OK.png|16px]] [[Rigol VS5000 series]] (2ch, 20-200MHz BW)
File:Rocktech bm102 mugshot.png|link=Rocktech BM102|[[File:Nuvola OK.png|16px]] [[Rocktech BM102]] (2ch, 50MS/s, 20MHz BW)
File:Dds120 mugshot.png|link=SainSmart DDS120|[[File:Nuvola OK.png|16px]] [[SainSmart DDS120]] (2ch, 50MS/s, 20MHz BW)
File:YiXingDianZi-MDSO.png|link=YiXingDianZi MDSO|[[File:Nuvola OK.png|16px]] [[YiXingDianZi MDSO]] (2ch, 48MS/s, 20MHz BW)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Dreamsourcelab dscope c20p front.jpg|link=DreamSourceLab DScope C20P|[[File:Nuvola Red.png|16px]] [[DreamSourceLab DScope C20P]] (2ch, 200MS/s, 50MHz BW)
File:Fluke scopemeter123.png|link=Fluke ScopeMeter 123|[[File:Nuvola Red.png|16px]] [[Fluke ScopeMeter 123]] (2ch, 25MS/s, 20MHz BW)
File:Focussz_fosc21_mugshot.png|link=Focussz Fosc21|[[File:Nuvola Red.png|16px]] [[Focussz Fosc21]] (2ch, 8kS/s, 3kHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=GW Instek GDS-2000 series|[[File:Nuvola Red.png|16px]] [[GW Instek GDS-2000 series]] (2ch, 1GS/s, 60MHz/100MHz/200MHz BW)
File:Hantek front.jpg|link=Hantek 6052BE|[[File:Nuvola Red.png|16px]] [[Hantek 6052BE]] (2ch, 150MS/s, 50MHz BW)
File:Hantek 6254bd mugshot.png|link=Hantek 6254BD|[[File:Nuvola Red.png|16px]] [[Hantek 6254BD]] (4ch, 1GS/s, 250MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Hantek DSO-1200|[[File:Nuvola Red.png|16px]] [[Hantek DSO-1200]] (2ch, 500MS/s, 200MHz BW)
File:Hantek_DSO_2100_usb.jpg|link=Hantek DSO-2100|[[File:Nuvola Red.png|16px]] [[Hantek DSO-2100]] (2ch, 100M/s, 30MHz BW)
File:Hantek DSO-220 Back.jpg|link=Hantek DSO-220|[[File:Nuvola Red.png|16px]] [[Hantek DSO-220]] (2ch, 60MS/s, 20MHz BW)
File:Hantek_PSO2020_0.JPG|link=Hantek PSO2020|[[File:Nuvola Red.png|16px]] [[Hantek PSO2020]] (1ch, 96MS/s, 20MHz BW)
File:Hantek dso2250 mugshot.png|link=Hantek DSO-2250|[[File:Nuvola Red.png|16px]] [[Hantek DSO-2250]] (2ch, 250MS/s, 100MHz BW)
File:Hantek dso-5200a device front.png|link=Hantek DSO-5200A|[[File:Nuvola Red.png|16px]] [[Hantek DSO-5200A]] (2ch, 250MS/s, 200MHz BW)
File:Hantek iDSO1070A.JPG|link=Hantek iDSO1070|[[File:Nuvola Red.png|16px]] [[Hantek iDSO1070]] (2ch, 250MS/s, 70MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Hantek iDSO1070A|[[File:Nuvola Red.png|16px]] [[Hantek iDSO1070A]] (2ch, 125MS/s, 70MHz BW)
File:Usbduxfast.png|link=Incite Technology USB-DUXfast|[[File:Nuvola Red.png|16px]] [[Incite Technology USB-DUXfast]] (16ch, 3MHz, ? BW)
File:Instrustar-IDS205A CaseFront.jpg|link=Instrustar ISDS205A|[[File:Nuvola Red.png|16px]] [[Instrustar_ISDS205A]] (2ch, 48MS/s, 20MHz BW)
File:Loto_OSC802.jpg|link=Loto OSC802|[[File:Nuvola Red.png|16px]] [[Loto OSC802]] (2ch, 80MS/s, 20MHz BW)
File:OsciPrime.png|link=Nexus-Computing OsciPrime|[[File:Nuvola Red.png|16px]] [[Nexus-Computing OsciPrime]] (2ch, ?MS/s, 3.3MHz-8MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Owon SDS series|[[File:Nuvola Red.png|16px]] [[Owon SDS series]] (2ch, 0.5-3.2GS/s, 60-300MHz BW)
File:Picoscope 2203.png|link=Pico Technology PicoScope 2203|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 2203]] (40/20MS/s, 5MHz BW)
File:Picoscope 2204A.png|link=Pico Technology PicoScope 2204A|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 2204A]] (100MS/s, 10MHz BW)
File:PicoScope_2205.png|link=Pico Technology PicoScope 2205|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 2205]] (200/100MS/s, 25MHz BW)
File:Picoscope 3206.png|link=Pico Technology PicoScope 3206|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 3206]] (200/100MS/s, 200MHz BW)
File:Picoscope 5203.png|link=Pico Technology PicoScope 5203|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 5203]] (1/0.5GS/s, 250MHz BW)
File:Sainsmart dds140 mugshot.png|link=SainSmart DDS140|[[File:Nuvola Red.png|16px]] [[SainSmart DDS140]] (2ch, 200MS/s, 40MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Soundcard|[[File:Nuvola Orange.png|16px]] [[Soundcard]] (7.1ch, 192kS/s, 22kHz BW)
File:Tektronix tds2024b mugshot.png|link=Tektronix TDS2000B series|[[File:Nuvola Orange.png|16px]] [[Tektronix TDS2000B series]] (2-4ch, 1-2GS/s, 60-200MHz BW)
File:UNI-T UTD2042C.png|link=UNI-T UTD2042C|[[File:Nuvola Red.png|16px]] [[UNI-T UTD2042C]] (2ch, 500MS/s, 40MHz BW)
File:Velleman PCSU1000.png|link=Velleman PCSU1000|[[File:Nuvola Red.png|16px]] [[Velleman PCSU1000]] (2ch, 1GS/s, 50MHz BW)
File:VellemanWFS210.png|link=Velleman WFS210|[[File:Nuvola Red.png|16px]] [[Velleman WFS210]] (2ch, 10MS/s, ?? MHz BW)
File:Voltcraft dso-220 usb.png|link=Voltcraft DSO-220|[[File:Nuvola Red.png|16px]] [[Voltcraft DSO-220]] (2ch, 60MS/s, 20MHz BW)
File:Voltcraft DSO-3062C.png|link=Voltcraft DSO-3062C|[[File:Nuvola Orange.png|16px]] [[Voltcraft DSO-3062C]] (2ch, 1GS/s, 60MHz BW)
</gallery>

== Multimeters ==

<gallery widths="100px" heights="100px">
File:Agilent_34401A_-_front.png|link=Agilent_34401A|[[file:Nuvola OK.png|16px]] [[Agilent 34401A]] (6.5 digits, GPIB, RS232)
File:Agilent_34405A.png|link=Agilent_34405A|[[file:Nuvola OK.png|16px]] [[Agilent 34405A]] (120000 counts, USB TMC)
File:Agilent U1232A.png|link=Agilent U12xxx series|[[File:Nuvola OK.png|16px]] [[Agilent U12xxx series]] (USB/Bluetooth)
File:Bbc gm m2110 mugshot.png|link=BBC Goertz Metrawatt M2110|[[File:Nuvola OK.png|16px]] [[BBC Goertz Metrawatt M2110]] (30000 counts, RS232)
File:Brymen BM257.png|link=Brymen BM257|[[File:Nuvola OK.png|16px]] [[Brymen BM257]] (6000 counts, RS232/USB)
File:Brymen bm257s mugshot.png|link=Brymen BM257s|[[File:Nuvola OK.png|16px]] [[Brymen BM257s]] (6000 counts, RS232/USB)
File:Bm525s-mugshot.png|link=Brymen BM525s|[[File:Nuvola OK.png|16px]] [[Brymen BM525s]] (10000 counts, USB)
File:Bm829s-mugshot.png|link=Brymen BM829s|[[File:Nuvola OK.png|16px]] [[Brymen BM829s]] (10000 counts, USB)
File:Bm_857_mugshot_500000.png|link=Brymen BM857|[[File:Nuvola OK.png|16px]] [[Brymen BM857]] (50000 counts, RS232)
File:Bm859s-front-sleeve.png|link=Brymen BM859s|[[File:Nuvola OK.png|16px]] [[Brymen BM859s]] (50000 counts, USB)
File:Bm869_mugshot.png|link=Brymen BM869|[[File:Nuvola OK.png|16px]] [[Brymen BM869]] (50000 counts, USB)
File:Digitek_dt4000zc_device_front.png|link=Digitek DT4000ZC|[[File:Nuvola OK.png|16px]] [[Digitek DT4000ZC]] (4000 counts, RS232)
File:Eevblog 121gw mugshot.png|link=EEVBlog 121GW|[[File:Nuvola OK.png|16px]] [[EEVBlog 121GW]] (50000 counts, BLE, SD)
File:Fluke 187.png|link=Fluke 187/189|[[File:Nuvola OK.png|16px]] [[Fluke 187/189]] (50000 counts, RS232)
File:Fluke 287.png|link=Fluke 287/289|[[File:Nuvola OK.png|16px]] [[Fluke 287/289]] (50000 counts, RS232)
File:Fluke_45_mugshot.png|link=Fluke 45|[[File:Nuvola OK.png|16px]] [[Fluke 45]] (100000 counts, GPIB/RS232)
File:Gmc metrahit 14a logo.png|link=Gossen Metrawatt Metrahit 14A|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 14A]] (3100 counts, RS232)
File:Gossen Metrawatt Metrahit 16I small.png|link=Gossen Metrawatt Metrahit 16I|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 16I]] (3100 counts, RS232)
File:Gossen Metrawatt Metrahit 18S small.png|link=Gossen Metrawatt Metrahit 18S|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 18S]] (31000 counts, RS232)
File:Gossen Metrawatt Metrahit 25S Logo.png|link=Gossen Metrawatt Metrahit 25S|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 25S]] (31000 counts, RS232/USB)
File:Gmc metrahit 29s logo.png|link=Gossen Metrawatt Metrahit 29S|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 29S]] (310000 counts, RS232/USB)
File:Gmc kmm2002 logo.png|link=Gossen Metrawatt T-Com KMM2002|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt T-Com KMM2002]] (3100 counts, RS232)
File:Gdm-397_front.png|link=GW Instek GDM-397|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-397]] (4000 counts, RS232/USB)
File:Gdm-8251a frontpanel.png|link=GW Instek GDM-8251A|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-8251A]] (120000 counts, RS232/USB/DigitalIO)
File:Gdm-8251a frontpanel.png|link=GW Instek GDM-8255A|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-8255A]] (199999 counts, RS232/USB/DigitalIO)
File:Gdm-9061_frontpanel.png|link=GW Instek GDM-9060|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-9060]] (1200000 counts, LAN/RS232/USB/DigitalIO/GPIB)
File:Gdm-9061_frontpanel.png|link=GW Instek GDM-9061|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-9061]] (1200000 counts, LAN/RS232/USB/DigitalIO/GPIB)
File:HP_3457a_sigrok_teaser.png|link=HP 3457A|[[File:Nuvola OK.png|16px]] [[HP 3457A]] (7.5 digits, GPIB)
File:Hp3478a mugshot.png|link=HP 3478A|[[File:Nuvola OK.png|16px]] [[HP 3478A]] (5.5 digits, GPIB)
File:HT410 logo.png|link=HT Instruments HT410|[[File:Nuvola OK.png|16px]] [[HT Instruments HT410]] (3100 counts, RS232)
File:100px_Idm103n.png|link=ISO-TECH IDM103N|[[File:Nuvola OK.png|16px]] [[ISO-TECH IDM103N]] (4000 counts, RS232)
File:keysight-34465a-mugshot.png|link=Keysight 34465A|[[File:Nuvola OK.png|16px]] [[Keysight 34465A]] (1200000 counts, LAN/USB/GPIB)
File:Mastech mas345 device front.png|link=MASTECH MAS345|[[File:Nuvola OK.png|16px]] [[MASTECH MAS345]] (4000 counts, RS232)
File:Mastech_ms2115b_mugshot.png|link=MASTECH MS2115B|[[File:Nuvola OK.png|16px]] [[MASTECH MS2115B]] (6000 counts, USB)
File:Mastech ms8250b mugshot.png|link=MASTECH MS8250B|[[File:Nuvola OK.png|16px]] [[MASTECH MS8250B]] (4000 counts, USB)
File:Mastech ms8250d mugshot.png|link=MASTECH MS8250D|[[File:Nuvola OK.png|16px]] [[MASTECH MS8250D]] (6600 counts, USB)
File:Meterman-38xr.png|link=Meterman_38XR|[[File:Nuvola OK.png|16px]] [[Meterman 38XR]] (10000 counts, RS232)
File:Metex M3850M mugshot.png|link=Metex M-3850M|[[File:Nuvola OK.png|16px]] [[Metex M-3850M]] (4000 counts, RS232)
File:Metex m4650cr mugshot.png|link=Metex M-4650CR|[[File:Nuvola OK.png|16px]] [[Metex M-4650CR]] (20000 counts, RS232)
File:Metex_ME-21.jpg|link=Metex ME-21|[[File:Nuvola OK.png|16px]] [[Metex ME-21]] (2000 counts, RS232)
File:Metex_me-31.png|link=Metex ME-31|[[File:Nuvola OK.png|16px]] [[Metex ME-31]] (4000 counts, RS232)
File:Metrix mx56c.png|link=Metrix MX56C|[[File:Nuvola OK.png|16px]] [[Metrix MX56C]] (50000 counts, RS232)
File:Mooshimeter_mugshot.png|link=Mooshim Engineering Mooshimeter|[[File:Nuvola OK.png|16px]] [[Mooshim Engineering Mooshimeter]] (24bit, BLE)
File:Norma dm950.png|link=Norma DM950|[[File:Nuvola OK.png|16px]] [[Norma DM950]] (21000 counts, RS232)
File:Pce-pce-dm32.png|link=PCE PCE-DM32|[[File:Nuvola OK.png|16px]] [[PCE PCE-DM32]] (4000 counts, RS232)
File:Peaktech 3330 mugshot.png|link=PeakTech 3330|[[File:Nuvola OK.png|16px]] [[PeakTech 3330]] (4000 counts, RS232/USB)
File:Metex_me-31.png|link=PeakTech 3410|[[File:Nuvola OK.png|16px]] [[PeakTech 3410]] (4000 counts, RS232)
File:Peaktech3415_top.png|link=PeakTech 3415|[[File:Nuvola OK.png|16px]] [[PeakTech 3415]] (6000 counts, USB)
File:Peaktech 4370 device front.png|link=PeakTech 4370|[[File:Nuvola OK.png|16px]] [[PeakTech 4370]] (2000 counts, RS232)
File:Peaktech 4390a metex m-3860m mugshot.png|link=PeakTech 4390A|[[File:Nuvola OK.png|16px]] [[PeakTech 4390A]] (4000 counts, RS232)
File:Rs_22_168_mugshot.png|link=RadioShack 22-168|[[File:Nuvola OK.png|16px]] [[RadioShack 22-168]] (2000 counts, RS232)
File:Rs_22-805_front.png|link=RadioShack 22-805|[[File:Nuvola OK.png|16px]] [[RadioShack 22-805]] (4000 counts, RS232)
File:radioshack_22_812_front.png|link=RadioShack 22-812|[[File:Nuvola OK.png|16px]] [[RadioShack 22-812]] (4000 counts, RS232)
File:siemens_b1026_logo.png|link=Siemens B1026|[[File:Nuvola OK.png|16px]] [[Siemens B1026]] (21000 counts, RS232)
File:Siemens B1105 small.png|link=Siemens B1105|[[File:Nuvola OK.png|16px]] [[Siemens B1105]] (310000 counts, RS232/USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Siglent SDM3055|[[File:Nuvola OK.png|16px]] [[Siglent SDM3055]] (5.5 digits, LAN/USB/GPIB)
File:Sparkfun 70c mugshot.png|link=SparkFun 70C|[[File:Nuvola OK.png|16px]] [[SparkFun 70C]] (6000 counts, USB)
File:Tecpel dmm8061.png|link=Tecpel DMM-8061|[[File:Nuvola OK.png|16px]] [[Tecpel DMM-8061]] (4000 counts, RS232/USB)
File:Tp4000zc_front.png|link=TekPower TP4000ZC|[[File:Nuvola OK.png|16px]] [[TekPower TP4000ZC]] (4000 counts, RS232)
File:Tenma 72-7730.png|link=Tenma 72-7730|[[File:Nuvola OK.png|16px]] [[Tenma 72-7730]] (20000 counts, RS232/USB)
File:Tenma 72-7732.png|link=Tenma 72-7732|[[File:Nuvola OK.png|16px]] [[Tenma 72-7732]] (40000 counts, RS232/USB)
File:Tenma 72-7745.png|link=Tenma 72-7745|[[File:Nuvola OK.png|16px]] [[Tenma 72-7745]] (4000 counts, RS232/USB)
File:Tenma 72-7750.png|link=Tenma 72-7750|[[File:Nuvola OK.png|16px]] [[Tenma 72-7750]] (6000 counts, RS232/USB)
File:Tenma 72-9380A.png|link=Tenma 72-9380A|[[File:Nuvola OK.png|16px]] [[Tenma 72-9380A]] (40000 counts, RS232/USB)
File:Ut60e_-_front_-_alpha.png|link=UNI-T UT60E|[[File:Nuvola OK.png|16px]] [[UNI-T UT60E]] (4000 counts, RS232/USB)
File:Uni-t ut61b mugshot.png|link=UNI-T UT61B|[[File:Nuvola OK.png|16px]] [[UNI-T UT61B]] (4000 counts, RS232/USB)
File:Uni-t ut61c mugshot.png|link=UNI-T UT61C|[[File:Nuvola OK.png|16px]] [[UNI-T UT61C]] (6000 counts, RS232/USB)
File:Uni t ut61d device.png|link=UNI-T UT61D|[[File:Nuvola OK.png|16px]] [[UNI-T UT61D]] (6000 counts, RS232/USB)
File:Old ver front.png|link=UNI-T UT61E|[[File:Nuvola OK.png|16px]] [[UNI-T UT61E]] (22000 counts, RS232/USB)
File:Ut71c mugshot.png|link=UNI-T UT71C|[[File:Nuvola OK.png|16px]] [[UNI-T UT71C]] (40000 counts, RS232/USB)
File:Uni-t-ut181a mugshot.png|link=UNI-T UT181A|[[File:Nuvola OK.png|16px]] [[UNI-T UT181A]] (60000 counts, USB)
File:Va_va18b.png|link=V&A VA18B|[[File:Nuvola OK.png|16px]] [[V&A VA18B]] (6000 counts, USB)
File:Va va40b mugshot.png|link=V&A VA40B|link=V&A VA40B|[[File:Nuvola OK.png|16px]] [[V&A VA40B]] (6000 counts, USB)
File:DVM4100.png|link=Velleman DVM4100|link=Velleman DVM4100|[[File:Nuvola OK.png|16px]] [[Velleman DVM4100]] (6000 counts, USB)
File:Victor 70C.png|link=Victor 70C|[[File:Nuvola OK.png|16px]] [[Victor 70C]] (4000 counts, USB)
File:Victor 86c device front.png|link=Victor 86C|[[File:Nuvola OK.png|16px]] [[Victor 86C]] (4000 counts, USB)
File:Voltcraft m-3650cr.png|link=Voltcraft M-3650CR|[[File:Nuvola OK.png|16px]] [[Voltcraft M-3650CR]] (2000 counts, RS232)
File:Voltcraft_M-3650D_transparent.png|link=Voltcraft M-3650D|[[File:Nuvola OK.png|16px]] [[Voltcraft M-3650D]] (2000 counts, RS232)
File:Voltcraft m4650cr.png|link=Voltcraft M-4650CR|[[File:Nuvola OK.png|16px]] [[Voltcraft M-4650CR]] (20000 counts, RS232)
File:Voltcraft ME-42 logo.png|link=Voltcraft ME-42|[[File:Nuvola OK.png|16px]] [[Voltcraft ME-42]] (4000 counts, RS232)
File:Voltcraft vc820 device.png|link=Voltcraft VC-820|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-820]] (4000 counts, RS232/USB)
File:Voltcraft vc830.png|link=Voltcraft VC-830|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-830]] (6000 counts, RS232/USB)
File:Voltcraft vc840 device front.png|link=Voltcraft VC-840|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-840]] (4000 counts, RS232/USB)
File:Voltcraft vc870 mugshot.png|link=Voltcraft VC-870|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-870]] (40000 counts, RS232/USB)
File:Voltcraft vc920.png|link=Voltcraft VC-920|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-920]] (40000/4000 counts, RS232/USB)
File:Voltcraft vc940.png|link=Voltcraft VC-940|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-940]] (40000/4000 counts, RS232/USB)
File:Voltcraft vc96 mugshot.png|link=Voltcraft VC-96|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-96]] (4000 counts, RS232)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Appa 107.png|link=APPA 107|[[File:Nuvola Orange.png|16px]] [[APPA 107]] (4000 / 20000 counts, RS232)
File:Sigrok_logo_no_text_transparent_512.png|link=APPA Multimeters|[[File:Nuvola Orange.png|16px]] [[APPA Multimeters]] (Most models, Optical RS232/USB, BLE)
File:Benning MM 12 - 01 - Front Sleeve.png|link=BENNING MM 12|[[File:Nuvola Orange.png|16px]] [[BENNING MM 12]] (40000 counts, RS232/USB, BLE)
File:Sigrok_logo_no_text_transparent_512.png|link=CEM DT-987BT|[[File:Nuvola Red.png|16px]] [[CEM DT-987BT]] (50000 counts, BLE)
File:Digitek dt8000.png|link=Digitek DT8000|[[File:Nuvola Red.png|16px]] [[Digitek DT8000]] (8000 counts, RS232)
File:Digitek dt80000.png|link=Digitek DT80000|[[File:Nuvola Red.png|16px]] [[Digitek DT80000]] (80000 counts, RS232)
File:Escort 179 device front.png|link=Escort 179|[[File:Nuvola Red.png|16px]] [[Escort 179]] (10000 counts, RS232)
File:Sigrok_logo_no_text_transparent_512.png|link=Gossen Metrawatt Metrahit 28C|[[File:Nuvola Red.png|16px]] [[Gossen Metrawatt Metrahit 28C]] (310000 counts, RS232/USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Gossen Metrawatt Metrahit 28S|[[File:Nuvola Red.png|16px]] [[Gossen Metrawatt Metrahit 28S]] (310000 counts, RS232/USB)
File:Gossen metrahit 30m.png|link=Gossen-Metrawatt METRAHIT 30M|[[File:Nuvola Red.png|16px]] [[Gossen-Metrawatt METRAHIT 30M]] (1200000 counts, RS232/USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Gossen Metrawatt Metrahit X-Tra|[[File:Nuvola Red.png|16px]] [[Gossen Metrawatt Metrahit X-Tra]] (12000 counts, USB)
File:Sigrok_logo_no_text_transparent_512.png|link=HYELEC MS8236|[[File:Nuvola Red.png|16px]] [[HYELEC MS8236]] (6000 counts, USB)
File:800px-Mastech m9803r device front.png|link=MASTECH M9803R|[[File:Nuvola Red.png|16px]] [[MASTECH M9803R]] (4000 counts, RS232)
File:Metrix mx53.png|link=Metrix MX53|[[File:Nuvola Red.png|16px]] [[Metrix MX53]] (50000 counts, RS232)
File:Owon_XDM2041.JPG|link=Owon XDM2041|[[File:Nuvola Orange.png|16px]] [[Owon XDM2041]] (55000 counts, RS232)
File:Peaktech-3442-front.png|link=PeakTech 3442|[[File:Nuvola Red.png|16px]] [[PeakTech 3442]] (50000 counts, BLE)
File:Peaktech 4380 mugshot.png|link=PeakTech 4380|[[File:Nuvola Red.png|16px]] [[PeakTech 4380]] (4000 counts, RS232)
File:Peaktech 4390 mugshot.png|link=PeakTech 4390|[[File:Nuvola Red.png|16px]] [[PeakTech 4390]] (6000 counts, USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Protek 6500|[[File:Nuvola Red.png|16px]] [[Protek 6500]] (50000 counts, RS232)
File:Rigol DM3068 front.png|link=Rigol DM3068|[[File:Nuvola Red.png|16px]] [[Rigol DM3068]] (2200000 counts, LAN/USB/GPIB/RS232)
File:RS PRO S2 - 01 - Front.png|link=RS PRO S2|[[File:Nuvola Orange.png|16px]] [[RS PRO S2]] (6000 counts, BLE)
File:Tenma 72-1016.png|link=Tenma 72-1016|[[File:Nuvola Red.png|16px]] [[Tenma 72-1016]] (6000 counts, RS232/USB)
File:Uni-t-ut81b mugshot.png|link=UNI-T UT81B|[[File:Nuvola Red.png|16px]] [[UNI-T UT81B]] (6000 counts, USB)
File:Voltcraft 3850D front transp.png|link=Voltcraft M-3850D|[[File:Nuvola Red.png|16px]] [[Voltcraft M-3850D]] (4000 counts, RS232)
File:Voltcraft m3890dt usb.png|link=Voltcraft M-3890DT|[[File:Nuvola Red.png|16px]] [[Voltcraft M-3890DT]] (4000 counts, USB)
File:Voltcraft m4660a device front.png|link=Voltcraft M-4660A|[[File:Nuvola Red.png|16px]] [[Voltcraft M-4660A]] (20000 counts, RS232)
File:Voltcraft vc890 mugshot.png|link=Voltcraft VC-890|[[File:Nuvola Red.png|16px]] [[Voltcraft VC-890]] (60000 counts, USB/serial)
File:Voltcraft VC-950 - 01 - Front.png|link=Voltcraft VC-950|[[File:Nuvola Orange.png|16px]] [[Voltcraft VC-950]] (100000/10000 counts, serial/USB)
</gallery>

== LCR meters ==

<gallery widths="100Px" heights="100px">
File:Der ee de-5000 mugshot.png|link=DER EE DE-5000|[[File:Nuvola_OK.png|16px]] [[DER EE DE-5000]] (serial)
File:Sigrok_logo_no_text_transparent_512.png|link=MASTECH MS5308|[[File:Nuvola_OK.png|16px]] [[MASTECH MS5308]] (serial)
File:peaktech2165-front.png|link=Peaktech 2165|[[File:Nuvola_OK.png|16px]] [[Peaktech 2165]] (serial)
File:Peaktech 2170 mugshot.png|link=PeakTech 2170|[[File:Nuvola_OK.png|16px]] [[PeakTech 2170]] (serial)
File:uni_t_ut612_1.png|link=UNI-T UT612|[[File:Nuvola_OK.png|16px]] [[UNI-T UT612]] (USB/HID)
File:Voltcraft4080_2.png|link=Voltcraft 4080|[[File:Nuvola_OK.png|16px]] [[Voltcraft 4080]] (serial)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Agilent U1732B.png|link=Agilent U1732B|[[File:Nuvola Red.png|16px]] [[Agilent U1732B]] (IR)
File:Sigrok_logo_no_text_transparent_512.png|link=BK Precision 879B|[[File:Nuvola Red.png|16px]] [[BK Precision 879B]] (USB)
</gallery>

== Sound level meters ==

<gallery widths="100px" heights="100px">
File:CEM DT-8852.png|link=CEM DT-8852|[[File:Nuvola OK.png|16px]] [[CEM DT-8852]] (USB)
File:Colead SL-5868P.png|link=Colead SL-5868P|[[File:Nuvola OK.png|16px]] [[Colead SL-5868P]] (RS232)
File:Kecheng KC-330B.png|link=Kecheng KC-330B|[[File:Nuvola OK.png|16px]] [[Kecheng KC-330B]] (RS232)
File:PCE-322A.png|link=PCE PCE-322A|[[File:Nuvola OK.png|16px]] [[PCE PCE-322A]] (USB)
File:Tondaj sl-814.png|link=Tondaj SL-814|[[File:Nuvola OK.png|16px]] [[Tondaj SL-814]] (USB)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Pce_pce-222_front.png|link=PCE PCE-222|[[File:Nuvola Red.png|16px]] [[PCE PCE-222]] (also: light-/thermo-/hygrometer; RS232)
File:Voltcraft_dl_160s.png|link=Voltcraft DL-160S|[[File:Nuvola Red.png|16px]] [[Voltcraft DL-160S]] (USB)
File:Voltcraft_DL-161S.png|link=Voltcraft DL-161S|[[File:Nuvola Red.png|16px]] [[Voltcraft DL-161S]] (USB)
</gallery>

== Thermometers ==

<gallery widths="100px" heights="100px">
File:rs55ii.png|link=APPA 55II|[[File:Nuvola OK.png|16px]] [[APPA 55II]] (2xtemp, RS232)
File:EL-USB-2.png|link=Lascar Electronics EL-USB-2|[[File:Nuvola OK.png|16px]] [[Lascar Electronics EL-USB-2]] (1xtemp, 1xhum, USB)
File:MASTECH_MS6514_mugshot.png|link=MASTECH MS6514|[[File:Nuvola OK.png|16px]] [[MASTECH MS6514]] (2x temp, USB/serial)
File:Mic 98581.png|link=MIC 98581|[[File:Nuvola OK.png|16px]] [[MIC 98581]] (1xtemp, USB)
File:Mic 98583.png|link=MIC 98583|[[File:Nuvola OK.png|16px]] [[MIC 98583]] (1xtemp, 1xhum, USB)
File:Uni-t ut325 front.png|link=UNI-T UT325|[[File:Nuvola OK.png|16px]] [[UNI-T UT325]] (2xtemp, USB)
File:Voltcraft k204.png|link=Voltcraft K204|[[File:Nuvola OK.png|16px]] [[Voltcraft K204]] (4xtemp, RS232)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Elitech rc3.png|link=Elitech RC-3|[[File:Nuvola Red.png|16px]] [[Elitech RC-3]] (1xtemp, RS232)
File:Escort 19.png|link=Escort 19|[[File:Nuvola Red.png|16px]] [[Escort 19]] (1x temp, RS232)
File:Pax_instruments_t400.jpg|link=Pax Instruments T400|[[File:Nuvola Red.png|16px]] [[Pax Instruments T400]] (4xtemp, USB)
File:Pce_pce-222_front.png|link=PCE PCE-222|[[File:Nuvola Red.png|16px]] [[PCE PCE-222]] (1xtemp, RS232)
File:Rding temper front.png|link=RDing TEMPer|[[File:Nuvola Red.png|16px]] [[RDing TEMPer]] (1xtemp, USB)
File:Rding temper gold device front.png|link=RDing TEMPer Gold|[[File:Nuvola Red.png|16px]] [[RDing TEMPer Gold]] (1xtemp, USB)
File:Rding temper1 device front.png|link=RDing TEMPer1|[[File:Nuvola Red.png|16px]] [[RDing TEMPer1]] (1xtemp, USB)
File:Pcsensor_temper1k2.png|link=RDing TEMPer1K2|[[File:Nuvola Red.png|16px]] [[RDing TEMPer1K2]] (1xtemp, USB)
File:Voltcraft dl-120th.png|link=Voltcraft DL-120TH|[[File:Nuvola Red.png|16px]] [[Voltcraft DL-120TH]] (1xtemp, USB)
File:Voltcraft dl-140th.png|link=Voltcraft DL-140TH|[[File:Nuvola Red.png|16px]] [[Voltcraft DL-140TH]] (1xtemp, USB)
</gallery>

== Hygrometers ==

<gallery widths="100px" heights="100px">
File:EL-USB-2.png|link=Lascar Electronics EL-USB-2|[[File:Nuvola OK.png|16px]] [[Lascar Electronics EL-USB-2]] (temp/humidity, USB)
File:Mic 98583.png|link=MIC 98583|[[File:Nuvola OK.png|16px]] [[MIC 98583]] (temp/humidity, USB)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Pce_pce-222_front.png|link=PCE PCE-222|[[File:Nuvola Red.png|16px]] [[PCE PCE-222]] (also: light-/soundlevelmeter; RS232)
File:Silabs si7005usb dgl eb top.jpg|link=SiLabs Si7005USB-Dongle|[[File:Nuvola Red.png|16px]] [[SiLabs Si7005USB-Dongle]] (USB)
</gallery>

== Anemometers ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Mastech ms6252b.png|link=MASTECH MS6252B|[[File:Nuvola Red.png|16px]] [[MASTECH MS6252B]] (USB)
</gallery>

== Light meters ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Lutron YK-2005LX.png|link=Lutron YK-2005LX|[[File:Nuvola Red.png|16px]] [[Lutron YK-2005LX]] (RS232)
File:Pce_pce-222_front.png|link=PCE PCE-222|[[File:Nuvola Red.png|16px]] [[PCE PCE-222]] (RS232)
</gallery>

== Energy meters ==

<gallery widths="100px" heights="100px">
File:ATORCH J7-c.jpg|link=ATORCH_J7-c|[[File:Nuvola OK.png|16px]] [[ATORCH_J7-c]] (USB tester)
File:Acme.png|link=BayLibre ACME|[[File:Nuvola OK.png|16px]] [[BayLibre ACME]] (I2C)
File:Actaris_a14c5_teleinfo.png|link=EDF Teleinfo|[[File:Nuvola OK.png|16px]] [[EDF Teleinfo]] (RS232)
File:Rdtech-tc66c-mugshot.png|link=RDTech_TC66C|[[File:Nuvola OK.png|16px]] [[RDTech TC66C]] (USB tester)
File:UM24C_display.jpg|link=RDTech_UM_series|[[File:Nuvola OK.png|16px]] [[RDTech UM series]] (USB testers)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">

</gallery>

== DAQs ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Ni usb 6008.png|link=NI USB-6008|[[File:Nuvola Red.png|16px]] [[NI USB-6008]] (8/2 analog inputs/outputs, 12 digital I/Os)
</gallery>

== Dataloggers ==

<gallery widths="100px" heights="100px">
File:EL-USB-CO.png|link=Lascar Electronics EL-USB-CO|[[File:Nuvola OK.png|16px]] [[Lascar Electronics EL-USB-CO]] (carbon monoxide (CO) logger, USB)
File:Testo_435-4.png|link=Testo 435-4|[[File:Nuvola OK.png|16px]] [[Testo 435-4]] (USB)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Gsg_indoor_air_monitor.png|link=GSG Indoor Air Monitor|[[File:Nuvola Red.png|16px]] [[GSG Indoor Air Monitor]] (air quality monitor, USB)
File:Maul_studio_i.png|link=MAUL studio i|[[File:Nuvola Red.png|16px]] [[MAUL studio i]] (weighing scale, RS232)
File:Voltcraft co-20.png|link=Voltcraft CO-20|[[File:Nuvola Red.png|16px]] [[Voltcraft CO-20]] (air quality monitor, USB)
</gallery>

== Tachometers ==

<gallery widths="100px" heights="100px">
File:Uni-t ut372 mugshot.png|link=UNI-T UT372|[[File:Nuvola OK.png|16px]] [[UNI-T UT372]] (USB)
</gallery>

== Scales ==

<gallery widths="100px" heights="100px">
File:Kern ew-6200-2nm mugshot.png|link=KERN scale series|[[File:Nuvola OK.png|16px]] [[KERN scale series]] (RS232)
</gallery>

== Digital loads ==

<gallery widths="100px" heights="100px">
File:Arachnid Labs ReLoad Pro - Mugshot.png|link=Arachnid Labs Reload Pro|[[File:Nuvola OK.png|16px]] [[Arachnid Labs Reload Pro]] (USB)
File:ATORCH DL24MP-150W Purple Picture.jpg|link=ATORCH DL24MP-150W Purple|[[File:Nuvola OK.png|16px]] [[ATORCH DL24MP-150W Purple]]
File:Itech It8511plus frontpanel.png|link=ITECH IT8500 series|[[File:Nuvola OK.png|16px]] [[ITECH IT8500 series]]
File:Maynuo m9812 mugshot.png|link=Maynuo M9812|[[File:Nuvola OK.png|16px]] [[Maynuo M9812]]
File:Ztetech-ebd-usb%2B.png|link=ZKETECH_EBD-USB|[[File:Nuvola OK.png|16px]] [[ZKETECH EBD-USB]]
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Atten ATZ9711.png|link=ATTEN ATZ9711|[[File:Nuvola Red.png|16px]] [[ATTEN ATZ9711]]
File:SIGLENT_SDL1020X-E_-_Mugshot.jpg|link=SIGLENT SDL10X0|[[File:Nuvola Orange.png|16px]] [[SIGLENT SDL10X0]]
</gallery>

== Function generators ==

<gallery widths="100px" heights="100px">
File:Jds6600-mugshot.png|link=Joy-IT JDS6600|[[File:Nuvola OK.png|16px]] [[Joy-IT JDS6600]] (60MHz, USB RS232)
File:Sigrok_logo_no_text_transparent_512.png|link=Rohde&Schwarz SME series|[[file:Nuvola OK.png|16px]] [[Rohde&Schwarz SME series]] (1ch, various, GPIB&RS232)
File:Rigol_DG811_frontpanel.png|link=Rigol DG800 Series|[[File:Nuvola OK.png|16px]] [[Rigol DG800 Series]] (1-2ch, 10/25/35MHz, USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Rigol DG900 Series|[[File:Nuvola OK.png|16px]] [[Rigol DG900 Series]] (2ch, 50/70/100MHz, USB)
File:Dg1000z_series.png|link=Rigol DG1000z Series|[[File:Nuvola OK.png|16px]] [[Rigol DG1000z Series]] (2ch, 25/35/60MHz, USB, LAN)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Agilent 33120A Front.png|link=Agilent 33120A|[[File:Nuvola Red.png|16px]] [[Agilent 33120A]] (15MHz, GPIB/Serial)
File:BG7TBL small.png|link=BG7TBL|[[File:Nuvola Red.png|16px]] [[BG7TBL]] (138MHz-4.4GHz, PC-based, USB)
File:Hantek DDS-3X25 top.png|link=Hantek DDS-3X25|[[File:Nuvola Red.png|16px]] [[Hantek DDS-3X25]] (25MHz, PC-based, USB)
File:Hp_3325a_front.png|link=HP 3325A|[[File:Nuvola Red.png|16px]] [[HP 3325A]] (20MHz, GPIB)
File:MHINSTEK UDB1305S persp.jpg|link=MHINSTEK UDB1xxxS|[[File:Nuvola Red.png|16px]] [[MHINSTEK UDB1xxxS]] (2/5/8MHz, Serial)
File:MHINSTEK MHS-5200A persp.jpg|link=MHINSTEK MHS-5200A|[[File:Nuvola Orange.png|16px]] [[MHINSTEK MHS-5200A]] (6/12/20/25MHz, USB)
File:Siglent sdg1010 device front 8116.png|link=Siglent SDG1010|[[File:Nuvola Red.png|16px]] [[Siglent SDG1010]] (10MHz, USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Velleman PCG10|[[File:Nuvola Red.png|16px]] [[Velleman PCG10]] (1MHz, PC-based, LPT)
</gallery>

== Frequency counters ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Hantek DDS-3X25 top.png|link=Hantek DDS-3X25|[[File:Nuvola Red.png|16px]] [[Hantek DDS-3X25]] (50MHz, PC-based, USB)
File:HP 5350B.png|link=HP 5350B|[[File:Nuvola Red.png|16px]] [[HP 5350B]] (10Hz-20GHz, GPIB)
</gallery>

== RF receivers ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Per vices noctar.png|link=Per Vices Noctar|[[File:Nuvola Red.png|16px]] [[Per Vices Noctar]] (100kHz-4GHz, IQ modulator/demodulator, PCIe)
</gallery>

== Spectrum analyzers ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Sigrok_logo_no_text_transparent_512.png|link=Siglent SSA3000X series|[[File:Nuvola Red.png|16px]] [[Siglent SSA3000X series]] (9kHz-2.1GHz, USB, Ethernet)
</gallery>

== Power supplies ==

<gallery widths="100px" heights="100px">
File:Sigrok logo no text transparent 512.png|link=Agilent N5700 series|[[File:Nuvola OK.png|16px]] [[Agilent N5700 series]]
File:Atten PPS3203T-3S.png|link=Atten PPS3203T-3S|[[File:Nuvola OK.png|16px]] [[Atten PPS3203T-3S]] (3ch, 2x 0-32V, 1x 0-6V at 0-3A, USB&RS232)
File:Sigrok logo no text transparent 512.png|link=BK Precision 9310|[[File:Nuvola OK.png|16px]] [[BK Precision 9310]]
File:Chroma_61604_front.png|link=Chroma 61604|[[File:Nuvola OK.png|16px]] [[Chroma 61604]] (1ch, 0-300V, 0-16A, 2kVA)
File:Conrad_digi_35_cpu_logo.png|link=Conrad DIGI 35 CPU|[[File:Nuvola OK.png|16px]] [[Conrad DIGI 35 CPU]] (1ch, 0-35V / 0-2.55A, RS232)
File:Envox_eez_h24005_front_panel.jpg|link=Envox EEZ H24005|[[File:Nuvola OK.png|16px]] [[Envox EEZ H24005]] (2ch, USB&LAN)
File:Envox_eez_bb3_enclosure_prototype.jpg|link=Envox EEZ Bench Box 3|[[File:Nuvola OK.png|16px]] [[Envox EEZ Bench Box 3]] (6ch, modular, USB&LAN)
File:Gwinstek-gpd-3303s.png|link=GW Instek GPD series|[[File:Nuvola OK.png|16px]] [[GW Instek GPD series]] (2/3/4ch, 0-30V / 0-3A, USB/serial)
File:Sigrok logo no text transparent 512.png|link=HP 661xC series|[[File:Nuvola OK.png|16px]] [[HP 661xC series]]
File:Agilent-66312a-mugshot.png|link=HP 66312A|[[File:Nuvola OK.png|16px]] [[HP 66312A]] (1ch, 0-20V / 0-2A, GPIB&RS232)
File:HP-6632B_mugshot.png|link=HP 6632B|[[File:Nuvola OK.png|16px]] [[HP 6632B]] (1ch, 0-20V / 0-5A, GPIB&RS232)
File:Velleman ps3005d mugshot.png|link=Korad KAxxxxP series|[[File:Nuvola OK.png|16px]] [[Korad KAxxxxP series]] (1ch, 0-30V / 0-5A, USB&RS232)
File:Manson hcs3202.png|link=Manson HCS-3xxx series|[[File:Nuvola OK.png|16px]] [[Manson HCS-3xxx series]] (1ch, 1-36V / 0-10A, USB)
File:Motech_LPS-301_logo.png|link=Motech LPS-301|[[File:Nuvola OK.png|16px]] [[Motech LPS-301]] (1ch, 1-32V / 0-2A, RS232)
File:Owon_P4603.JPG|link=Owon P4000 series|[[File:Nuvola OK.png|16px]] [[Owon P4000 series]] (1ch, 30V/5A or 60V/3A, RS232)
File:Philips PM2813.png|link=Philips PM2800 series|[[File:Nuvola OK.png|16px]] [[Philips_PM2800_series|Fluke/Philips PM2800 series]]
File:Rdtech-dps.png|link=RDTech DPS series|[[File:Nuvola OK.png|16px]] [[RDTech DPS series]] (1ch, various, USB/BT)
File:RD6006 frontpanel.png|link=RDTech RD series|[[File:Nuvola OK.png|16px]] [[RDTech RD series]] (1ch, 0-60V, 0-6/12/18A, USB/Serial/WiFi)
File:Sigrok logo no text transparent 512.png|link=Rigol DP700 series|[[File:Nuvola OK.png|16px]] [[Rigol DP700 series]]
File:Rigol DP832.png|link=Rigol DP800 series|[[File:Nuvola OK.png|16px]] [[Rigol DP800 series]]
File:rs_hmc8043_mugshot.png|link=Rohde&Schwarz HMC 8043|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz HMC 8043]] (3ch, 0-32V / 0-3A, USB&LXI)
File:rs_hmp4040_mugshot.png|link=Rohde&Schwarz HMP 4000 series|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz HMP 4000 series]] (3/4ch, 0-32V / 0-10A, USB&LAN)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Sigrok logo no text transparent 512.png|link=Delta Elektronika SM3300 series|[[File:Nuvola Red.png|16px]] [[Delta Elektronika SM3300 series]] (1ch, 18V-660V/3.3kW, USB, RS232, RS485, RS422)
File:Sigrok logo no text transparent 512.png|link=ETommens eTM-xxxxP Series|[[File:Nuvola Orange.png|16px]] [[ETommens eTM-xxxxP Series]] (1ch, various, USB/Serial)
File:Hanmatek_HM305P_front.JPG|link=Hanmatek HM305P|[[File:Nuvola Orange.png|16px]] [[Hanmatek HM305P]] (1ch, 0-30V/0-5A, USB/Serial)
File:Rockseed_rs310p.jpg|link=RockSeed RS310P|[[File:Nuvola Orange.png|16px]] [[RockSeed RS310P]] (1ch, 0-30V/0-10A, USB/Serial)
File:Sigrok logo no text transparent 512.png|link=Siglent SPD3303 series|[[File:Nuvola Orange.png|16px]] [[Siglent SPD3303 series]] (3ch, 0-32V/0-3.2A, USB, LAN)
File:Sigrok logo no text transparent 512.png|link=Voltcraft 18220|[[File:Nuvola Red.png|16px]] [[Voltcraft 18220]] (1ch, 0-40V/0-5A, RS232)
</gallery>

== Multiplexer / Relay actuators ==

<gallery>
File:dcttech_usbrelay_mugshot.png|link=dcttech usbrelay|[[File:Nuvola OK.png|16px]] [[dcttech usbrelay]] (1-8ch, 10A @ 250VAC, 10A @ 30VDC, USB HID)
File:devantech-eth008b-mugshot.png|link=Devantech ETH008|[[File:Nuvola OK.png|16px]] [[Devantech ETH008]] (2-20ch, 250VAC, 16A, Ethernet/Wifi)
File:HP_59306A-mugshot.png|link=HP 59306A|[[File:Nuvola OK.png|16px]] [[HP 59306A]] (6ch, 0.5A @ 28VDC, 0.5A @ 115VAC, GPIB)
File:ICStation_ICSE012A-mugshot.png|link=ICStation USBRelay|[[File:Nuvola OK.png|16px]] [[ICStation USBRelay]] (2-8ch, 10A @ 30VDC, 10A @ 250VAC, USB/Serial)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Gembird-silvershield-front.png|link=Gembird silvershield|[[File:Nuvola Red.png|16px]] [[Gembird silvershield]] (1-4ch, 230V, 10A, USB HID)
</gallery>

== GPIB interfaces ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Agilent_82357a_top_cover_removed.jpg|link=Agilent_82357A|[[File:Nuvola Red.png|16px]] [[Agilent 82357A]] (Hardware-based, USB)
File:Ar488-artag-pcb-top.png|link=AR488|[[File:Nuvola Red.png|16px]] [[AR488]] (Arduino based, USB/RS232)
File:Beiming_s82357.png|link=Beiming S82357|[[File:Nuvola Red.png|16px]] [[Beiming S82357]] (hardware-based, USB)
File:ICS 488-USB.png|link=ICS 488-USB|[[File:Nuvola Red.png|16px]] [[ICS 488-USB]] (hardware-based, USB)
File:GPIB-USB 82357B clone.png|link=GPIB-USB 82357B clone|[[File:Nuvola Red.png|16px]] [[GPIB-USB 82357B clone]] (hardware-based, USB)
File:NI GPIB-ENET.png|link=National Instruments GPIB-ENET|[[File:Nuvola Red.png|16px]] [[National Instruments GPIB-ENET]] (hardware-based, Ethernet)
File:NI GPIB-USB-HS.png|link=National Instruments GPIB-USB-HS|[[File:Nuvola Red.png|16px]] [[National Instruments GPIB-USB-HS]] (hardware-based, USB)
File:Prologix-usb.png|link=Prologix GPIB-USB|[[File:Nuvola Red.png|16px]] [[Prologix GPIB-USB]] (firmware-based, USB)
File:GalvantGPIBUSBrev4.JPG|link=Galvant GPIBUSB|[[File:Nuvola Red.png|16px]] [[Galvant GPIBUSB]] (firmware-based, USB, OSHW)
</gallery>

== Potential other candidates ==

If you own any other logic analyzers, oscilloscopes, multimeters, dataloggers, ... and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Join the [https://lists.sourceforge.net/lists/listinfo/sigrok-devel mailing list] or ask on [https://web.libera.chat/#sigrok #sigrok@libera.chat] if you want to help out.

__FORCETOC__

Envox EEZ H24005

2024-10-11T18:15:45Z

Bert: /* Sigrok Support */

{{Infobox power supply
| image = [[File:Envox_eez_h24005_front_panel.jpg|300px]]
| name = Envox EEZ H24005
| status = supported
| source_code_dir = scpi-pps
| channels = 2
| connectivity = SCPI over USB serial or TCP
| features = values, output, over-(voltage,current,power) thresholds.
| website = [https://www.envox.eu/bench-power-supply/introduction/ www.envox.eu]
}}

The '''Envox EEZ H24005''' is an open hardware and open source firmware bench DC power supply with two channels and a remote control interface based on SCPI 1999.0.

EEZ H24005 is [https://www.crowdsupply.com/envox/eez-h24005/updates/the-h24005-is-dead-long-live-the-bb3 no longer under active development] and the official kits are no longer available for puchase; its successor is the [[Envox EEZ Bench Box 3|EEZ Bench Box 3]]. (The hardware designs are still available if you want to build one yourself from raw parts.)

== Hardware ==

Due to being an open hardware design, there is comprehensive documentation of all of the hardware on [https://www.envox.eu/bench-power-supply/introduction/ the project website], including a [https://www.envox.eu/bench-power-supply/technology-overview/ Technology overview].

The system is designed to be modular, so it can in principle have different power supply implementations and other custom modifications. A driver for this device should thus ideally be implemented in a dynamic way that can, as far as possible, respond to a particular system's different capabilities.

== Protocol ==

The EEZ H24005 has a SCPI-based protocol available either over USB Serial or over TCP/IP on the device's Ethernet port. The project website has [https://www.envox.eu/bench-power-supply/psu-scpi-reference-manual/ a comprehensive guide to the SCPI implementation].

The SCPI self-identification strings (from <code>*IDN?</code>) changed in firmware v1.02:

* Before v1.02: <code>EEZ,PSU 2/40/5</code> followed by the platform name
* v1.02 and later: <code>Envox,EEZ H24005</code> followed by the platform name

Only the newer form is shown in the documentation.

There is [https://www.envox.hr/eez-psu-simulator/ an online simulator] which allows exercising both the touch user interface and the SCPI port. The simulator is an emscripten build of a variant of the real system firmware, so its behavior is pretty realistic aside from (of course) having just a software model of the power supply module behavior.

== Sigrok Support ==

The sigrok <code>scpi-pps</code> driver supports the EEZ H24005, [[User:Apparentlymart]] provided the implementation.

Only the USB port can be used to communicate with the device. The firmware's implementation of TCP over the ethernet port is broken.

== See also ==

* [[Programmable power supply]]
* [[Power supply comparison]]

[[Category:Device]]
[[Category:Power supply]]
[[Category:Supported]]

Supported hardware

2024-09-12T14:55:27Z

Bert: /* Function generators */

sigrok is intended as a flexible, cross-platform, and '''hardware-independent''' software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) in the [http://sigrok.org/gitweb/?p=libsigrok.git;a=summary latest git version of libsigrok] (fewer devices might be supported in tarball releases) and devices we plan to support in the future. The [http://sigrok.org/gitweb/?p=libsigrok.git;a=blob_plain;f=README.devices README.devices] document discusses more device or platform specific details, physical transports, dependencies on firmware and external tools, how to enable communication modes, etc.

The lists are sorted by category ([[File:Nuvola OK.png|16px]] supported: [[:Category:Supported|{{PAGESINCATEGORY:Supported|pages}}]], [[File:Nuvola Orange.png|16px]] in progress: [[:Category:In progress|{{PAGESINCATEGORY:In progress|pages}}]], [[File:Nuvola Red.png|16px]] planned: [[:Category:Planned|{{PAGESINCATEGORY:Planned|pages}}]]), and alphabetically within those categories.

== Logic analyzers ==

<gallery widths="100px" heights="100px">
File:128axc-usbee-axpro-clone-Overview.jpg|link=128axc-based USBee AX-Pro clone|[[File:Nuvola OK.png|16px]] [[128axc-based USBee AX-Pro clone|128axc-based USBee AX-Pro clone ]] (8ch, 24MHz)
File:ARMFLY MINI LOGIC.png|link=ARMFLY Mini-Logic|[[File:Nuvola OK.png|16px]] [[ARMFLY Mini-Logic]] (8ch, 24MHz)
File:ASIX Omega.png|link=ASIX OMEGA|[[File:Nuvola OK.png|16px]] [[ASIX OMEGA]] (16ch, 400MHz)
File:ASIX SIGMA 2.png|link=ASIX SIGMA|[[File:Nuvola OK.png|16px]] [[ASIX SIGMA]] (16ch, 200MHz)
File:AZ-Delivery logic analyzer.png|link=AZDelivery Logic Analyzer|[[File:Nuvola OK.png|16px]] [[AZDelivery Logic Analyzer | AZ-Delivery Logic Analyzer]]] (8ch, 24MHz)
File:BeagleLogic.jpg|link=BeagleLogic|[[File:Nuvola OK.png|16px]] [[BeagleLogic]] (12(max 14)ch, 100MHz)
File:Braintechnology_usb_interface_v26.png|link=Braintechnology USB Interface V2.x|[[File:Nuvola OK.png|16px]] [[Braintechnology USB Interface V2.x]] (8/16ch, 24/12MHz)
File:Braintechnology_usb_lps.png|link=Braintechnology USB-LPS|[[File:Nuvola OK.png|16px]] [[Braintechnology USB-LPS]] (8/16ch, 24/12MHz)
File:Chronovu la8 front.png|link=ChronoVu LA8|[[File:Nuvola OK.png|16px]] [[ChronoVu LA8]] (8ch, 100MHz)
File:Chronovu la16.png|link=ChronoVu LA16|[[File:Nuvola OK.png|16px]] [[ChronoVu LA16]] (16ch, 200MHz)
File:Cwav_usbee_sx.png|link=CWAV USBee SX|[[File:Nuvola OK.png|16px]] [[CWAV USBee SX]] (8ch, 24MHz)
File:Buspirate_v3.png|link=Dangerous Prototypes Buspirate|[[File:Nuvola OK.png|16px]] [[Dangerous Prototypes Buspirate]] (5ch, 1MHz)
File:Dangerous prototypes irtoy mugshot.png|link=Dangerous Prototypes USB IR Toy|[[File:Nuvola OK.png|16px]] [[Dangerous Prototypes USB IR Toy]] (1ch, 10kHz)
File:DSLogic.png|link=DreamSourceLab DSLogic|[[File:Nuvola OK.png|16px]] [[DreamSourceLab DSLogic]] (16ch, 400MHz)
File:DSLogic.png|link=DreamSourceLab DSLogic Basic|[[File:Nuvola OK.png|16px]] [[DreamSourceLab DSLogic Basic]] (16ch, 100MHz)
File:DSLogic.png|link=DreamSourceLab DSLogic Plus|[[File:Nuvola OK.png|16px]] [[DreamSourceLab DSLogic Plus]] (16ch, 400MHz)
File:DSLogic.png|link=DreamSourceLab DSLogic Pro|[[File:Nuvola OK.png|16px]] [[DreamSourceLab DSLogic Pro]] (16ch, 400MHz)
File:Eeelec xla esla100.png|link=EE Electronics ESLA100|[[File:Nuvola OK.png|16px]] [[EE Electronics ESLA100]] (8ch, 24MHz)
File:Chronovu la8 ftdi ft245rl.jpg|link=FTDI-LA|[[File:Nuvola OK.png|16px]] [[FTDI-LA]] (8ch, ~10MHz)
File:jtagulator-transparent.png|link=JTAGulator|[[File:Nuvola OK.png|16px]][[JTAGulator | Grand Idea Studio JTAGulator]] (24ch, 1.2MHz)
File:Greatfet_mugshot.png|link=GreatFET One|[[File:Nuvola OK.png|16px]] [[GreatFET One]] (8/4/2/1ch, 40.8/68/102/204MHz)
File:Hantek 4032l mugshot.png|link=Hantek 4032L|[[File:Nuvola OK.png|16px]] [[Hantek 4032L]] (32ch, 400MHz)
File:Hantek 6022be mugshot.png|link=Hantek 6022BL|[[File:Nuvola OK.png|16px]] [[Hantek 6022BL]] (8ch, 24MHz)
File:Hobby components hctest0006 mugshot.png|link=Hobby Components HCTEST0006|[[File:Nuvola OK.png|16px]] [[Hobby Components HCTEST0006]] (8ch, 24MHz)
File:Ikalogic_scanalogic2.png|link=IKALOGIC Scanalogic-2|[[File:Nuvola OK.png|16px]] [[IKALOGIC Scanalogic-2]] (4ch, 20MHz)
File:Ikalogic scanaplus mugshot.png|link=IKALOGIC ScanaPLUS|[[File:Nuvola OK.png|16px]] [[IKALOGIC ScanaPLUS]] (9ch, 100MHz)
File:Kingst la2016 mugshot.png|link=Kingst LA2016|[[File:Nuvola OK.png|16px]] [[Kingst LA2016]] (16ch, 200MHz)
File:Kingst-la5016-mugshot.png|link=Kingst LA5016|[[File:Nuvola OK.png|16px]] [[Kingst LA5016]] (16ch, 500MHz)
File:Kingst-la5032-mugshot.jpg|link=Kingst LA5032|[[File:Nuvola OK.png|16px]] [[Kingst LA5032]] (32ch, 500MHz)
File:Kingst kqs3506 la16100.png|link=KingST KQS3506-LA16100|[[File:Nuvola OK.png|16px]] [[KingST KQS3506-LA16100]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
File:Lcsoft-miniboard-front.png|link=Lcsoft Mini Board|[[File:Nuvola OK.png|16px]] [[Lcsoft Mini Board]] (8/16ch, 24/12MHz)
File:Lecroy logicstudio16 mugshot.png|link=LeCroy LogicStudio|[[File:Nuvola OK.png|16px]] [[LeCroy LogicStudio]] (8/16ch, 1GHz/500MHz)
File:logic-shrimp-front.png|link=Logic Shrimp|[[File:Nuvola OK.png|16px]] [[Logic Shrimp]] (4ch, 20MHz)
File:Mcu123 saleae logic clone.png|link=MCU123 Saleae Logic clone|[[File:Nuvola OK.png|16px]] [[MCU123 Saleae Logic clone]] (8ch, 24MHz)
File:Meilhaus logian 16l mugshot.png|link=Meilhaus Logian-16L|[[File:Nuvola OK.png|16px]] [[Meilhaus Logian-16L]] (16ch, 200MHz)
File:Microchip_pickit2.png|link=Microchip PICkit2|[[File:Nuvola OK.png|16px]] [[Microchip PICkit2]] (3ch, 1MHz)
File:Usbee_ax_clone_front.png|link=MCU123 USBee AX Pro clone|[[File:Nuvola OK.png|16px]] [[MCU123 USBee AX Pro clone]] (8ch, 24MHz)
File:Mcupro_Logic16_overview.png|link=mcupro Logic16 clone|[[File:Nuvola OK.png|16px]] [[mcupro Logic16 clone]] (16ch, 100MHz)
File:Noname_saleae_logic_clone_mugshot.png|link=Noname Saleae Logic clone|[[File:Nuvola OK.png|16px]] [[Noname Saleae Logic clone|Noname Saleae Logic clone]] (8ch, 24MHz)
File:Openbench logic sniffer front.png|link=Openbench Logic Sniffer|[[File:Nuvola OK.png|16px]] [[Openbench Logic Sniffer]] (32ch, 100MHz)
File:Prist akip 9101 mugshot.png|link=Prist AKIP-9101|[[File:Nuvola OK.png|16px]] [[Prist AKIP-9101]] (16ch, 200MHz)
File:Robomotic buglogic3.png|link=Robomotic BugLogic 3|[[File:Nuvola OK.png|16px]] [[Robomotic BugLogic 3]] (8ch, 24MHz)
File:Robomotic_minilogic.png|link=Robomotic MiniLogic|[[File:Nuvola OK.png|16px]] [[Robomotic MiniLogic]] (8ch, 24MHz)
File:Saleae Logic.png|link=Saleae Logic|[[File:Nuvola OK.png|16px]] [[Saleae Logic]] (8ch, 24MHz)
File:Saleae_Logic16_bottom.png|link=Saleae Logic16|[[File:Nuvola OK.png|16px]] [[Saleae Logic16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
File:Saanlima Pipistrello-OLS.png|link=Saanlima Pipistrello OLS|[[File:Nuvola OK.png|16px]] [[Saanlima Pipistrello OLS]] (32ch, 100MHz)
File:Sigrok_logo_no_text_transparent_512.png|link=SUMP compatibles|[[File:Nuvola OK.png|16px]] [[SUMP compatibles]]
File:Sysclk lwla1016.png|link=Sysclk LWLA1016|[[File:Nuvola OK.png|16px]] [[Sysclk LWLA1016]] (16ch, 100MHz)
File:Sysclk lwla1034 mugshot.png|link=Sysclk LWLA1034|[[File:Nuvola OK.png|16px]] [[Sysclk LWLA1034]] (34ch, 125MHz)
File:Sysclk sla5032 mugshot.png|link=Sysclk SLA5032|[[File:Nuvola OK.png|16px]] [[Sysclk SLA5032]] (32ch, 500MHz)
File:VKTECH_thumb.jpg|link=VKTECH_saleae_clone|[[File:Nuvola OK.png|16px]] [[VKTECH_saleae_clone|VKTECH saleae clone]] (8ch, 24MHz)
File:Wayengineer saleae16.png|link=WayEngineer Saleae16|[[File:Nuvola OK.png|16px]] [[WayEngineer Saleae16]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
File:Zeroplus Logic Cube.png|link=ZEROPLUS Logic Cube LAP-C(16032)|[[File:Nuvola OK.png|16px]] [[ZEROPLUS Logic Cube LAP-C(16032)]] (16ch, 100MHz)
File:Zeroplus Logic Cube.png|link=ZEROPLUS Logic Cube LAP-C(322000)|[[File:Nuvola OK.png|16px]] [[ZEROPLUS Logic Cube LAP-C(322000)]] (32ch, 200MHz)
File:Zeroplus_lap-16128u.png|link=ZEROPLUS LAP-16128U|[[File:Nuvola OK.png|16px]] [[ZEROPLUS LAP-16128U]] (16ch, 200MHz)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Acute_pkla1216.png|link=Acute PKLA-1216|[[File:Nuvola Red.png|16px]] [[Acute PKLA-1216]] (16ch, 200MHz)
File:Arduino_Uno-R3.jpg|link=Arduino|[[File:Nuvola Orange.png|16px]] [[Arduino]] (6ch, 4MHz)
File:Sigrok_logo_no_text_transparent_512.png|link=Codethink Interrogizer|[[File:Nuvola Red.png|16px]] [[Codethink Interrogizer]] (16ch, 200kHz)
File:IMG 20191206 105430.jpg|link=CoLA|[[File:Nuvola Red.png|16px]] [[CoLA]] (96/48/24ch, 25/50/100MHz)
File:DSLogic U3Pro16.png|link=DreamSourceLab DSLogic U3Pro16|[[File:Nuvola Red.png|16px]] [[DreamSourceLab DSLogic U3Pro16]] (16ch, 1GHz)
File:Hsa-logic.png|link=HSA Logic|[[File:Nuvola Red.png|16px]] [[HSA Logic]] (8ch, 6.25MHz)
File:Ideofy_la_08.png|link=Ideofy LA-08|[[File:Nuvola Red.png|16px]] [[Ideofy LA-08]] (8ch, 96/60/30MHz @ 2/4/8ch)
File:Intronix Logicport.png|link=Intronix Logicport LA1034|[[File:Nuvola Red.png|16px]] [[Intronix Logicport LA1034]] (34ch, 500MHz)
File:Sigrok_logo_no_text_transparent_512.png|link=Link Instruments LA-5580|[[File:Nuvola Red.png|16px]] [[Link Instruments LA-5580]] (80ch, 500MHz)
File:Minila parport.png|link=MiniLA|[[File:Nuvola Red.png|16px]] [[MiniLA]] (32ch, 100MHz)
File:Minila_mockup.png|link=MiniLA Mockup|[[File:Nuvola Red.png|16px]] [[MiniLA Mockup]] (32ch, 100MHz)
File:Noname_la16_mugshot.png|link=Noname LA16|[[File:Nuvola Red.png|16px]] [[Noname LA16]] (16ch, 100MHz)
File:Noname xl logic16 100m mugshot.png|link=Noname XL-LOGIC16-100M|[[File:Nuvola Orange.png|16px]] [[Noname XL-LOGIC16-100M]] (16ch, 100/50/32/16MHz @ 3/6/9/16ch)
File:Rockylogic_ant8.png|link=RockyLogic Ant8|[[File:Nuvola Red.png|16px]] [[RockyLogic Ant8]] (8ch, 500MHz)
File:RockyLogic Ant18e.png|link=RockyLogic Ant18e|[[File:Nuvola Red.png|16px]] [[RockyLogic Ant18e]] (8ch, 1GHz)
File:Sysclk lwla2034 mugshot.png|link=Sysclk LWLA2034|[[File:Nuvola Red.png|16px]] [[Sysclk LWLA2034]] (34ch, 200MHz)
File:Techtools_digiview_dv1-100.png|link=TechTools DigiView DV1-100|[[File:Nuvola Red.png|16px]] [[TechTools DigiView DV1-100]] (18ch, 100MHz)
File:Tektronix TLA5204 1000.png|link=Tektronix TLA520X|[[File:Nuvola Red.png|16px]] [[Tektronix TLA520X]] (128ch, 2Ghz)
File:Xmos xtag2.png|link=XMOS XTAG-2|[[File:Nuvola Red.png|16px]] [[XMOS XTAG-2]] (?ch, 50MHz)
File:Zlg_la1032.png|link=ZLG LA1032|[[File:Nuvola Red.png|16px]] [[ZLG LA1032]] (32ch, 100MHz)
</gallery>

== Mixed-signal devices ==

<gallery widths=105px heights=105px>
File:Armfly_ax_pro.png|link=ARMFLY AX-Pro|[[File:Nuvola OK.png|16px]] [[ARMFLY AX-Pro]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Sysclk ax pro mugshot.png|link=Sysclk AX-Pro|[[File:Nuvola OK.png|16px]] [[Sysclk AX-Pro]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Esla201a.png|link=EE Electronics ESLA201A|[[File:Nuvola OK.png|16px]] [[EE Electronics ESLA201A]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Ht usbee axpro v5 mugshot.png|link=HT USBee-AxPro|[[File:Nuvola OK.png|16px]] [[HT USBee-AxPro]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:LeCroy_WaveSurfer_24Xs-A_front.png|link=LeCroy oscilloscope series|[[File:Nuvola OK.png|16px]] [[LeCroy oscilloscope series]] (various)
File:Noname lht00su1 mugshot.png|link=Noname LHT00SU1|[[File:Nuvola OK.png|16px]] [[Noname LHT00SU1]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Rigol DS1052E.png|link=Rigol DS1000 series|[[File:Nuvola OK.png|16px]] [[Rigol DS1000 series|Rigol DS1000D series]] (16ch, 2ch analog, 50-150MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Rigol DS4000 series|[[File:Nuvola OK.png|16px]] [[Rigol DS4000 series]] (0/16ch , 2-4ch analog, 2-4GS/s, 100MHz/200MHz/350MHz/500MHz BW)
File:Rigol_VS5202D.png|link=Rigol VS5000 series|[[File:Nuvola OK.png|16px]] [[Rigol VS5000 series|Rigol VS5000D series]] (16ch, 2ch analog, 20-200MHz BW)
File:RS HMO1002.png|link=Rohde&Schwarz HMO1002 series|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz HMO1002 series]] (2ch, 1GS/s, 50-100MHz BW)
File:HMO3000.jpg|link=Rohde&Schwarz HMO3000 series|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz HMO 3000 series]] (16ch, 2/4ch analog, 4GS/s, 300-500MHz BW)
File:RTA4000.jpg|link=Rohde&Schwarz RT series|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz RT series]] (8/16ch, 2/4ch analog, 2-5GS/s, 50MHz-1GHz BW)
File:Saleae Logic Pro 16 bottom.jpg|link=Saleae Logic Pro 16|[[File:Nuvola OK.png|16px]] [[Saleae Logic Pro 16]] (4/16ch, 500/100MHz; 16ch analog, 50MSa/s, 5MHz BW)
File:Siglent_SDS1202X-E_front.png|link=Siglent SDS1000X series|[[File:Nuvola OK.png|16px]] [[Siglent SDS1000X series]] (16ch, 2ch analog, 1GSa/s, 200/100MHz BW)
File:sds2304x-mugshot.png|link=Siglent SDS2000X series|[[File:Nuvola OK.png|16px]] [[Siglent SDS2000X series]] (16ch, 2/4ch analog, 2GSa/s, 300/200/150/100/70MHz BW)
File:Yokogawa DLM2000 front.png|link=Yokogawa DLM2000 series|[[File:Nuvola OK.png|16px]] [[Yokogawa DLM2000 series]] (8ch, 2/4ch analog, 2.5GSa/s, 200/350/500MHz BW)
File:Xzl studio ax mugshot.png|link=XZL_Studio AX|[[File:Nuvola OK.png|16px]] [[XZL_Studio AX]] (8ch, 24MHz; 1ch analog, 3MHz BW)
File:Xzl studio-dx mugshot.png|link=XZL_Studio DX|[[File:Nuvola OK.png|16px]] [[XZL_Studio DX]] (16ch, 24MHz; 2ch analog), Analog not supported
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Agilent_MSO7104A.png|link=Agilent MSO7104A|[[File:Nuvola Red.png|16px]] [[Agilent MSO7104A]] (16ch, ?; 4ch analog, 2GSa/s, 1GHz BW)
File:BitScope BS10.png|link=BitScope BS10|[[File:Nuvola Red.png|16px]] [[BitScope BS10]] (8ch, 40MHz; 2ch analog, 20MSa/s, ? BW)
File:Digilent_analog_discovery.png|link=Digilent Analog Discovery|[[File:Nuvola Red.png|16px]] [[Digilent Analog Discovery]] (16ch, 100MHz; 2ch analog, 100MSa/s, 5MHz BW)
File:Hantek_1008C.png|link=Hantek 1008C|[[File:Nuvola Red.png|16px]] [[Hantek 1008C]] (8ch)
File:Ht usbee dxpro mugshot.png|link=HT USBee-DxPro|[[File:Nuvola Red.png|16px]] [[HT USBee-DxPro]] (16ch, 24MHz; 2ch analog)
File:Lab nation smartscope mugshot.png|link=LabNation SmartScope|[[File:Nuvola Red.png|16px]] [[LabNation SmartScope]] (8ch, 100MHz; 2ch analog, 100MSa/s, 45MHz BW)
File:Link Instruments MSO-19 front.png|link=Link Instruments MSO-19|[[File:Nuvola Red.png|16px]] [[Link Instruments MSO-19]] (8ch, 200MHz; 1ch analog, 200MSa/s, 60MHz BW)
File:Meilhaus_mephisto_scope1.png|link=Meilhaus MEphisto Scope1|[[File:Nuvola Red.png|16px]] [[Meilhaus MEphisto Scope1]] (16ch, 100kHz; 2ch analog, 1MSa/s, 500kHz BW)
File:Polabs_poscope_basic2.png|link=PoLabs PoScope Basic2|[[File:Nuvola Red.png|16px]] [[PoLabs PoScope Basic2]] (16ch, 8MHz; 2ch analog, 200kSa/s, ? BW)
File:QuantAsylum QA100.png|link=QuantAsylum QA100|[[File:Nuvola Red.png|16px]] [[QuantAsylum QA100]] (12ch; 2ch analog)
File:Sigrok_logo_no_text_transparent_512.png|link=Rigol MSO5000 Series|[[File:Nuvola Orange.png|16px]] [[Rigol MSO5000 Series]] (16ch, 2-4ch analog, 70-350MHz BW)
File:Saleae_Logic8_case_bottom.jpg|link=Saleae Logic8|[[File:Nuvola Red.png|16px]] [[Saleae Logic8]] (3/6/7/8ch, 100/50/40/25MHz; 8ch analog, 10MSa/s, 1MHz BW)
File:Saleae_logic_pro_8-bottom.png|link=Saleae Logic Pro 8|[[File:Nuvola Red.png|16px]] [[Saleae Logic Pro 8]] (4/8ch, 500/100MHz; 8ch analog, 50MSa/s, 5MHz BW)
File:Picoscope 3205D MSO fp.jpg|link=Pico Technology PicoScope 3205D MSO|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 3205D MSO]] (16ch, 100MHz; 2ch analog, 1/0.5GS/s, 100MHz BW)
File:DSO3254A.jpg|link=Hantek DSO3254A|[[File:Nuvola Red.png|16px]] [[Hantek DSO3254A]] (16ch, 250MHz; 4ch analog, 1GS/s, 250MHz BW; 1 ch func/arb generator, 200MHz)

</gallery>

== Oscilloscopes ==

<gallery widths=100px heights=100px>
File:Agilent DSO1014A.png|link=Agilent DSO1000 series|[[File:Nuvola OK.png|16px]] [[Agilent DSO1000 series]] (2-4ch, 2GS/s, 60-200MHz BW)
File:Fluke_Scopemeter_199B.png|link=Fluke ScopeMeter 199B|[[File:Nuvola OK.png|16px]] [[Fluke ScopeMeter 199B]] (2ch, 2.5GS/s, 200MHz BW)
File:Voltcraft dso-6060c mugshot.png|link=GW Instek GDS-800 series|[[File:Nuvola OK.png|16px]] [[GW Instek GDS-800 series]] (2ch, 25GS/s, 60-250MHz BW)
File:Hameg HMO2024.png|link=Hameg HMO compact series|[[File:Nuvola OK.png|16px]] [[Hameg HMO compact series]] (2-4ch, 2GS/s, 70-200MHz BW)
File:Hantek 6022be mugshot.png|link=Hantek 6022BE|[[File:Nuvola OK.png|16px]] [[Hantek 6022BE]] (2ch, 48MS/s, 20MHz BW)
File:Hantek DSO-2090.png|link=Hantek DSO-2090|[[File:Nuvola OK.png|16px]] [[Hantek DSO-2090]] (2ch, 100MS/s, 40MHz)
File:Hung chang dso 2100 mugshot.png|link=Hung-Chang_DSO-2100|[[File:Nuvola OK.png|16px]] [[Hung-Chang DSO-2100]] (2ch, 100MS/s, 30MHz BW)
File:Rigol DS1052E.png|link=Rigol DS1000 series|[[File:Nuvola OK.png|16px]] [[Rigol DS1000 series|Rigol DS1000E series]] (2ch, 1GS/s, 50-150MHz BW)
File:Rigol DS1074Z front.png|link=Rigol DS1000Z series|[[File:Nuvola OK.png|16px]] [[Rigol DS1000Z series|Rigol DS1000Z series]] (4ch, 1GS/s, 50-100MHz BW)
File:Rigol-ds2072 mugshot.png|link=Rigol DS2000 series|[[File:Nuvola OK.png|16px]] [[Rigol DS2000 series]] (2ch, 2GS/s, 70-200MHz BW)
File:Rigol_VS5202D.png|link=Rigol VS5000 series|[[File:Nuvola OK.png|16px]] [[Rigol VS5000 series]] (2ch, 20-200MHz BW)
File:Rocktech bm102 mugshot.png|link=Rocktech BM102|[[File:Nuvola OK.png|16px]] [[Rocktech BM102]] (2ch, 50MS/s, 20MHz BW)
File:Dds120 mugshot.png|link=SainSmart DDS120|[[File:Nuvola OK.png|16px]] [[SainSmart DDS120]] (2ch, 50MS/s, 20MHz BW)
File:YiXingDianZi-MDSO.png|link=YiXingDianZi MDSO|[[File:Nuvola OK.png|16px]] [[YiXingDianZi MDSO]] (2ch, 48MS/s, 20MHz BW)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Dreamsourcelab dscope c20p front.jpg|link=DreamSourceLab DScope C20P|[[File:Nuvola Red.png|16px]] [[DreamSourceLab DScope C20P]] (2ch, 200MS/s, 50MHz BW)
File:Fluke scopemeter123.png|link=Fluke ScopeMeter 123|[[File:Nuvola Red.png|16px]] [[Fluke ScopeMeter 123]] (2ch, 25MS/s, 20MHz BW)
File:Focussz_fosc21_mugshot.png|link=Focussz Fosc21|[[File:Nuvola Red.png|16px]] [[Focussz Fosc21]] (2ch, 8kS/s, 3kHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=GW Instek GDS-2000 series|[[File:Nuvola Red.png|16px]] [[GW Instek GDS-2000 series]] (2ch, 1GS/s, 60MHz/100MHz/200MHz BW)
File:Hantek front.jpg|link=Hantek 6052BE|[[File:Nuvola Red.png|16px]] [[Hantek 6052BE]] (2ch, 150MS/s, 50MHz BW)
File:Hantek 6254bd mugshot.png|link=Hantek 6254BD|[[File:Nuvola Red.png|16px]] [[Hantek 6254BD]] (4ch, 1GS/s, 250MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Hantek DSO-1200|[[File:Nuvola Red.png|16px]] [[Hantek DSO-1200]] (2ch, 500MS/s, 200MHz BW)
File:Hantek_DSO_2100_usb.jpg|link=Hantek DSO-2100|[[File:Nuvola Red.png|16px]] [[Hantek DSO-2100]] (2ch, 100M/s, 30MHz BW)
File:Hantek DSO-220 Back.jpg|link=Hantek DSO-220|[[File:Nuvola Red.png|16px]] [[Hantek DSO-220]] (2ch, 60MS/s, 20MHz BW)
File:Hantek_PSO2020_0.JPG|link=Hantek PSO2020|[[File:Nuvola Red.png|16px]] [[Hantek PSO2020]] (1ch, 96MS/s, 20MHz BW)
File:Hantek dso2250 mugshot.png|link=Hantek DSO-2250|[[File:Nuvola Red.png|16px]] [[Hantek DSO-2250]] (2ch, 250MS/s, 100MHz BW)
File:Hantek dso-5200a device front.png|link=Hantek DSO-5200A|[[File:Nuvola Red.png|16px]] [[Hantek DSO-5200A]] (2ch, 250MS/s, 200MHz BW)
File:Hantek iDSO1070A.JPG|link=Hantek iDSO1070|[[File:Nuvola Red.png|16px]] [[Hantek iDSO1070]] (2ch, 250MS/s, 70MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Hantek iDSO1070A|[[File:Nuvola Red.png|16px]] [[Hantek iDSO1070A]] (2ch, 125MS/s, 70MHz BW)
File:Usbduxfast.png|link=Incite Technology USB-DUXfast|[[File:Nuvola Red.png|16px]] [[Incite Technology USB-DUXfast]] (16ch, 3MHz, ? BW)
File:Instrustar-IDS205A CaseFront.jpg|link=Instrustar ISDS205A|[[File:Nuvola Red.png|16px]] [[Instrustar_ISDS205A]] (2ch, 48MS/s, 20MHz BW)
File:Loto_OSC802.jpg|link=Loto OSC802|[[File:Nuvola Red.png|16px]] [[Loto OSC802]] (2ch, 80MS/s, 20MHz BW)
File:OsciPrime.png|link=Nexus-Computing OsciPrime|[[File:Nuvola Red.png|16px]] [[Nexus-Computing OsciPrime]] (2ch, ?MS/s, 3.3MHz-8MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Owon SDS series|[[File:Nuvola Red.png|16px]] [[Owon SDS series]] (2ch, 0.5-3.2GS/s, 60-300MHz BW)
File:Picoscope 2203.png|link=Pico Technology PicoScope 2203|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 2203]] (40/20MS/s, 5MHz BW)
File:Picoscope 2204A.png|link=Pico Technology PicoScope 2204A|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 2204A]] (100MS/s, 10MHz BW)
File:PicoScope_2205.png|link=Pico Technology PicoScope 2205|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 2205]] (200/100MS/s, 25MHz BW)
File:Picoscope 3206.png|link=Pico Technology PicoScope 3206|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 3206]] (200/100MS/s, 200MHz BW)
File:Picoscope 5203.png|link=Pico Technology PicoScope 5203|[[File:Nuvola Red.png|16px]] [[Pico Technology PicoScope 5203]] (1/0.5GS/s, 250MHz BW)
File:Sainsmart dds140 mugshot.png|link=SainSmart DDS140|[[File:Nuvola Red.png|16px]] [[SainSmart DDS140]] (2ch, 200MS/s, 40MHz BW)
File:Sigrok_logo_no_text_transparent_512.png|link=Soundcard|[[File:Nuvola Orange.png|16px]] [[Soundcard]] (7.1ch, 192kS/s, 22kHz BW)
File:Tektronix tds2024b mugshot.png|link=Tektronix TDS2000B series|[[File:Nuvola Orange.png|16px]] [[Tektronix TDS2000B series]] (2-4ch, 1-2GS/s, 60-200MHz BW)
File:UNI-T UTD2042C.png|link=UNI-T UTD2042C|[[File:Nuvola Red.png|16px]] [[UNI-T UTD2042C]] (2ch, 500MS/s, 40MHz BW)
File:Velleman PCSU1000.png|link=Velleman PCSU1000|[[File:Nuvola Red.png|16px]] [[Velleman PCSU1000]] (2ch, 1GS/s, 50MHz BW)
File:VellemanWFS210.png|link=Velleman WFS210|[[File:Nuvola Red.png|16px]] [[Velleman WFS210]] (2ch, 10MS/s, ?? MHz BW)
File:Voltcraft dso-220 usb.png|link=Voltcraft DSO-220|[[File:Nuvola Red.png|16px]] [[Voltcraft DSO-220]] (2ch, 60MS/s, 20MHz BW)
File:Voltcraft DSO-3062C.png|link=Voltcraft DSO-3062C|[[File:Nuvola Orange.png|16px]] [[Voltcraft DSO-3062C]] (2ch, 1GS/s, 60MHz BW)
</gallery>

== Multimeters ==

<gallery widths="100px" heights="100px">
File:Agilent_34401A_-_front.png|link=Agilent_34401A|[[file:Nuvola OK.png|16px]] [[Agilent 34401A]] (6.5 digits, GPIB, RS232)
File:Agilent_34405A.png|link=Agilent_34405A|[[file:Nuvola OK.png|16px]] [[Agilent 34405A]] (120000 counts, USB TMC)
File:Agilent U1232A.png|link=Agilent U12xxx series|[[File:Nuvola OK.png|16px]] [[Agilent U12xxx series]] (USB/Bluetooth)
File:Bbc gm m2110 mugshot.png|link=BBC Goertz Metrawatt M2110|[[File:Nuvola OK.png|16px]] [[BBC Goertz Metrawatt M2110]] (30000 counts, RS232)
File:Brymen BM257.png|link=Brymen BM257|[[File:Nuvola OK.png|16px]] [[Brymen BM257]] (6000 counts, RS232/USB)
File:Brymen bm257s mugshot.png|link=Brymen BM257s|[[File:Nuvola OK.png|16px]] [[Brymen BM257s]] (6000 counts, RS232/USB)
File:Bm525s-mugshot.png|link=Brymen BM525s|[[File:Nuvola OK.png|16px]] [[Brymen BM525s]] (10000 counts, USB)
File:Bm829s-mugshot.png|link=Brymen BM829s|[[File:Nuvola OK.png|16px]] [[Brymen BM829s]] (10000 counts, USB)
File:Bm_857_mugshot_500000.png|link=Brymen BM857|[[File:Nuvola OK.png|16px]] [[Brymen BM857]] (50000 counts, RS232)
File:Bm859s-front-sleeve.png|link=Brymen BM859s|[[File:Nuvola OK.png|16px]] [[Brymen BM859s]] (50000 counts, USB)
File:Bm869_mugshot.png|link=Brymen BM869|[[File:Nuvola OK.png|16px]] [[Brymen BM869]] (50000 counts, USB)
File:Digitek_dt4000zc_device_front.png|link=Digitek DT4000ZC|[[File:Nuvola OK.png|16px]] [[Digitek DT4000ZC]] (4000 counts, RS232)
File:Eevblog 121gw mugshot.png|link=EEVBlog 121GW|[[File:Nuvola OK.png|16px]] [[EEVBlog 121GW]] (50000 counts, BLE, SD)
File:Fluke 187.png|link=Fluke 187/189|[[File:Nuvola OK.png|16px]] [[Fluke 187/189]] (50000 counts, RS232)
File:Fluke 287.png|link=Fluke 287/289|[[File:Nuvola OK.png|16px]] [[Fluke 287/289]] (50000 counts, RS232)
File:Fluke_45_mugshot.png|link=Fluke 45|[[File:Nuvola OK.png|16px]] [[Fluke 45]] (100000 counts, GPIB/RS232)
File:Gmc metrahit 14a logo.png|link=Gossen Metrawatt Metrahit 14A|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 14A]] (3100 counts, RS232)
File:Gossen Metrawatt Metrahit 16I small.png|link=Gossen Metrawatt Metrahit 16I|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 16I]] (3100 counts, RS232)
File:Gossen Metrawatt Metrahit 18S small.png|link=Gossen Metrawatt Metrahit 18S|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 18S]] (31000 counts, RS232)
File:Gossen Metrawatt Metrahit 25S Logo.png|link=Gossen Metrawatt Metrahit 25S|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 25S]] (31000 counts, RS232/USB)
File:Gmc metrahit 29s logo.png|link=Gossen Metrawatt Metrahit 29S|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt Metrahit 29S]] (310000 counts, RS232/USB)
File:Gmc kmm2002 logo.png|link=Gossen Metrawatt T-Com KMM2002|[[File:Nuvola OK.png|16px]] [[Gossen Metrawatt T-Com KMM2002]] (3100 counts, RS232)
File:Gdm-397_front.png|link=GW Instek GDM-397|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-397]] (4000 counts, RS232/USB)
File:Gdm-8251a frontpanel.png|link=GW Instek GDM-8251A|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-8251A]] (120000 counts, RS232/USB/DigitalIO)
File:Gdm-8251a frontpanel.png|link=GW Instek GDM-8255A|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-8255A]] (199999 counts, RS232/USB/DigitalIO)
File:Gdm-9061_frontpanel.png|link=GW Instek GDM-9060|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-9060]] (1200000 counts, LAN/RS232/USB/DigitalIO/GPIB)
File:Gdm-9061_frontpanel.png|link=GW Instek GDM-9061|[[File:Nuvola OK.png|16px]] [[GW Instek GDM-9061]] (1200000 counts, LAN/RS232/USB/DigitalIO/GPIB)
File:HP_3457a_sigrok_teaser.png|link=HP 3457A|[[File:Nuvola OK.png|16px]] [[HP 3457A]] (7.5 digits, GPIB)
File:Hp3478a mugshot.png|link=HP 3478A|[[File:Nuvola OK.png|16px]] [[HP 3478A]] (5.5 digits, GPIB)
File:HT410 logo.png|link=HT Instruments HT410|[[File:Nuvola OK.png|16px]] [[HT Instruments HT410]] (3100 counts, RS232)
File:100px_Idm103n.png|link=ISO-TECH IDM103N|[[File:Nuvola OK.png|16px]] [[ISO-TECH IDM103N]] (4000 counts, RS232)
File:keysight-34465a-mugshot.png|link=Keysight 34465A|[[File:Nuvola OK.png|16px]] [[Keysight 34465A]] (1200000 counts, LAN/USB/GPIB)
File:Mastech mas345 device front.png|link=MASTECH MAS345|[[File:Nuvola OK.png|16px]] [[MASTECH MAS345]] (4000 counts, RS232)
File:Mastech_ms2115b_mugshot.png|link=MASTECH MS2115B|[[File:Nuvola OK.png|16px]] [[MASTECH MS2115B]] (6000 counts, USB)
File:Mastech ms8250b mugshot.png|link=MASTECH MS8250B|[[File:Nuvola OK.png|16px]] [[MASTECH MS8250B]] (4000 counts, USB)
File:Mastech ms8250d mugshot.png|link=MASTECH MS8250D|[[File:Nuvola OK.png|16px]] [[MASTECH MS8250D]] (6600 counts, USB)
File:Meterman-38xr.png|link=Meterman_38XR|[[File:Nuvola OK.png|16px]] [[Meterman 38XR]] (10000 counts, RS232)
File:Metex M3850M mugshot.png|link=Metex M-3850M|[[File:Nuvola OK.png|16px]] [[Metex M-3850M]] (4000 counts, RS232)
File:Metex m4650cr mugshot.png|link=Metex M-4650CR|[[File:Nuvola OK.png|16px]] [[Metex M-4650CR]] (20000 counts, RS232)
File:Metex_ME-21.jpg|link=Metex ME-21|[[File:Nuvola OK.png|16px]] [[Metex ME-21]] (2000 counts, RS232)
File:Metex_me-31.png|link=Metex ME-31|[[File:Nuvola OK.png|16px]] [[Metex ME-31]] (4000 counts, RS232)
File:Metrix mx56c.png|link=Metrix MX56C|[[File:Nuvola OK.png|16px]] [[Metrix MX56C]] (50000 counts, RS232)
File:Mooshimeter_mugshot.png|link=Mooshim Engineering Mooshimeter|[[File:Nuvola OK.png|16px]] [[Mooshim Engineering Mooshimeter]] (24bit, BLE)
File:Norma dm950.png|link=Norma DM950|[[File:Nuvola OK.png|16px]] [[Norma DM950]] (21000 counts, RS232)
File:Pce-pce-dm32.png|link=PCE PCE-DM32|[[File:Nuvola OK.png|16px]] [[PCE PCE-DM32]] (4000 counts, RS232)
File:Peaktech 3330 mugshot.png|link=PeakTech 3330|[[File:Nuvola OK.png|16px]] [[PeakTech 3330]] (4000 counts, RS232/USB)
File:Metex_me-31.png|link=PeakTech 3410|[[File:Nuvola OK.png|16px]] [[PeakTech 3410]] (4000 counts, RS232)
File:Peaktech3415_top.png|link=PeakTech 3415|[[File:Nuvola OK.png|16px]] [[PeakTech 3415]] (6000 counts, USB)
File:Peaktech 4370 device front.png|link=PeakTech 4370|[[File:Nuvola OK.png|16px]] [[PeakTech 4370]] (2000 counts, RS232)
File:Peaktech 4390a metex m-3860m mugshot.png|link=PeakTech 4390A|[[File:Nuvola OK.png|16px]] [[PeakTech 4390A]] (4000 counts, RS232)
File:Rs_22_168_mugshot.png|link=RadioShack 22-168|[[File:Nuvola OK.png|16px]] [[RadioShack 22-168]] (2000 counts, RS232)
File:Rs_22-805_front.png|link=RadioShack 22-805|[[File:Nuvola OK.png|16px]] [[RadioShack 22-805]] (4000 counts, RS232)
File:radioshack_22_812_front.png|link=RadioShack 22-812|[[File:Nuvola OK.png|16px]] [[RadioShack 22-812]] (4000 counts, RS232)
File:siemens_b1026_logo.png|link=Siemens B1026|[[File:Nuvola OK.png|16px]] [[Siemens B1026]] (21000 counts, RS232)
File:Siemens B1105 small.png|link=Siemens B1105|[[File:Nuvola OK.png|16px]] [[Siemens B1105]] (310000 counts, RS232/USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Siglent SDM3055|[[File:Nuvola OK.png|16px]] [[Siglent SDM3055]] (5.5 digits, LAN/USB/GPIB)
File:Sparkfun 70c mugshot.png|link=SparkFun 70C|[[File:Nuvola OK.png|16px]] [[SparkFun 70C]] (6000 counts, USB)
File:Tecpel dmm8061.png|link=Tecpel DMM-8061|[[File:Nuvola OK.png|16px]] [[Tecpel DMM-8061]] (4000 counts, RS232/USB)
File:Tp4000zc_front.png|link=TekPower TP4000ZC|[[File:Nuvola OK.png|16px]] [[TekPower TP4000ZC]] (4000 counts, RS232)
File:Tenma 72-7730.png|link=Tenma 72-7730|[[File:Nuvola OK.png|16px]] [[Tenma 72-7730]] (20000 counts, RS232/USB)
File:Tenma 72-7732.png|link=Tenma 72-7732|[[File:Nuvola OK.png|16px]] [[Tenma 72-7732]] (40000 counts, RS232/USB)
File:Tenma 72-7745.png|link=Tenma 72-7745|[[File:Nuvola OK.png|16px]] [[Tenma 72-7745]] (4000 counts, RS232/USB)
File:Tenma 72-7750.png|link=Tenma 72-7750|[[File:Nuvola OK.png|16px]] [[Tenma 72-7750]] (6000 counts, RS232/USB)
File:Tenma 72-9380A.png|link=Tenma 72-9380A|[[File:Nuvola OK.png|16px]] [[Tenma 72-9380A]] (40000 counts, RS232/USB)
File:Ut60e_-_front_-_alpha.png|link=UNI-T UT60E|[[File:Nuvola OK.png|16px]] [[UNI-T UT60E]] (4000 counts, RS232/USB)
File:Uni-t ut61b mugshot.png|link=UNI-T UT61B|[[File:Nuvola OK.png|16px]] [[UNI-T UT61B]] (4000 counts, RS232/USB)
File:Uni-t ut61c mugshot.png|link=UNI-T UT61C|[[File:Nuvola OK.png|16px]] [[UNI-T UT61C]] (6000 counts, RS232/USB)
File:Uni t ut61d device.png|link=UNI-T UT61D|[[File:Nuvola OK.png|16px]] [[UNI-T UT61D]] (6000 counts, RS232/USB)
File:Old ver front.png|link=UNI-T UT61E|[[File:Nuvola OK.png|16px]] [[UNI-T UT61E]] (22000 counts, RS232/USB)
File:Ut71c mugshot.png|link=UNI-T UT71C|[[File:Nuvola OK.png|16px]] [[UNI-T UT71C]] (40000 counts, RS232/USB)
File:Uni-t-ut181a mugshot.png|link=UNI-T UT181A|[[File:Nuvola OK.png|16px]] [[UNI-T UT181A]] (60000 counts, USB)
File:Va_va18b.png|link=V&A VA18B|[[File:Nuvola OK.png|16px]] [[V&A VA18B]] (6000 counts, USB)
File:Va va40b mugshot.png|link=V&A VA40B|link=V&A VA40B|[[File:Nuvola OK.png|16px]] [[V&A VA40B]] (6000 counts, USB)
File:DVM4100.png|link=Velleman DVM4100|link=Velleman DVM4100|[[File:Nuvola OK.png|16px]] [[Velleman DVM4100]] (6000 counts, USB)
File:Victor 70C.png|link=Victor 70C|[[File:Nuvola OK.png|16px]] [[Victor 70C]] (4000 counts, USB)
File:Victor 86c device front.png|link=Victor 86C|[[File:Nuvola OK.png|16px]] [[Victor 86C]] (4000 counts, USB)
File:Voltcraft m-3650cr.png|link=Voltcraft M-3650CR|[[File:Nuvola OK.png|16px]] [[Voltcraft M-3650CR]] (2000 counts, RS232)
File:Voltcraft_M-3650D_transparent.png|link=Voltcraft M-3650D|[[File:Nuvola OK.png|16px]] [[Voltcraft M-3650D]] (2000 counts, RS232)
File:Voltcraft m4650cr.png|link=Voltcraft M-4650CR|[[File:Nuvola OK.png|16px]] [[Voltcraft M-4650CR]] (20000 counts, RS232)
File:Voltcraft ME-42 logo.png|link=Voltcraft ME-42|[[File:Nuvola OK.png|16px]] [[Voltcraft ME-42]] (4000 counts, RS232)
File:Voltcraft vc820 device.png|link=Voltcraft VC-820|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-820]] (4000 counts, RS232/USB)
File:Voltcraft vc830.png|link=Voltcraft VC-830|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-830]] (6000 counts, RS232/USB)
File:Voltcraft vc840 device front.png|link=Voltcraft VC-840|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-840]] (4000 counts, RS232/USB)
File:Voltcraft vc870 mugshot.png|link=Voltcraft VC-870|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-870]] (40000 counts, RS232/USB)
File:Voltcraft vc920.png|link=Voltcraft VC-920|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-920]] (40000/4000 counts, RS232/USB)
File:Voltcraft vc940.png|link=Voltcraft VC-940|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-940]] (40000/4000 counts, RS232/USB)
File:Voltcraft vc96 mugshot.png|link=Voltcraft VC-96|[[File:Nuvola OK.png|16px]] [[Voltcraft VC-96]] (4000 counts, RS232)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Appa 107.png|link=APPA 107|[[File:Nuvola Orange.png|16px]] [[APPA 107]] (4000 / 20000 counts, RS232)
File:Sigrok_logo_no_text_transparent_512.png|link=APPA Multimeters|[[File:Nuvola Orange.png|16px]] [[APPA Multimeters]] (Most models, Optical RS232/USB, BLE)
File:Benning MM 12 - 01 - Front Sleeve.png|link=BENNING MM 12|[[File:Nuvola Orange.png|16px]] [[BENNING MM 12]] (40000 counts, RS232/USB, BLE)
File:Sigrok_logo_no_text_transparent_512.png|link=CEM DT-987BT|[[File:Nuvola Red.png|16px]] [[CEM DT-987BT]] (50000 counts, BLE)
File:Digitek dt8000.png|link=Digitek DT8000|[[File:Nuvola Red.png|16px]] [[Digitek DT8000]] (8000 counts, RS232)
File:Digitek dt80000.png|link=Digitek DT80000|[[File:Nuvola Red.png|16px]] [[Digitek DT80000]] (80000 counts, RS232)
File:Escort 179 device front.png|link=Escort 179|[[File:Nuvola Red.png|16px]] [[Escort 179]] (10000 counts, RS232)
File:Sigrok_logo_no_text_transparent_512.png|link=Gossen Metrawatt Metrahit 28C|[[File:Nuvola Red.png|16px]] [[Gossen Metrawatt Metrahit 28C]] (310000 counts, RS232/USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Gossen Metrawatt Metrahit 28S|[[File:Nuvola Red.png|16px]] [[Gossen Metrawatt Metrahit 28S]] (310000 counts, RS232/USB)
File:Gossen metrahit 30m.png|link=Gossen-Metrawatt METRAHIT 30M|[[File:Nuvola Red.png|16px]] [[Gossen-Metrawatt METRAHIT 30M]] (1200000 counts, RS232/USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Gossen Metrawatt Metrahit X-Tra|[[File:Nuvola Red.png|16px]] [[Gossen Metrawatt Metrahit X-Tra]] (12000 counts, USB)
File:Sigrok_logo_no_text_transparent_512.png|link=HYELEC MS8236|[[File:Nuvola Red.png|16px]] [[HYELEC MS8236]] (6000 counts, USB)
File:800px-Mastech m9803r device front.png|link=MASTECH M9803R|[[File:Nuvola Red.png|16px]] [[MASTECH M9803R]] (4000 counts, RS232)
File:Metrix mx53.png|link=Metrix MX53|[[File:Nuvola Red.png|16px]] [[Metrix MX53]] (50000 counts, RS232)
File:Owon_XDM2041.JPG|link=Owon XDM2041|[[File:Nuvola Orange.png|16px]] [[Owon XDM2041]] (55000 counts, RS232)
File:Peaktech-3442-front.png|link=PeakTech 3442|[[File:Nuvola Red.png|16px]] [[PeakTech 3442]] (50000 counts, BLE)
File:Peaktech 4380 mugshot.png|link=PeakTech 4380|[[File:Nuvola Red.png|16px]] [[PeakTech 4380]] (4000 counts, RS232)
File:Peaktech 4390 mugshot.png|link=PeakTech 4390|[[File:Nuvola Red.png|16px]] [[PeakTech 4390]] (6000 counts, USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Protek 6500|[[File:Nuvola Red.png|16px]] [[Protek 6500]] (50000 counts, RS232)
File:Rigol DM3068 front.png|link=Rigol DM3068|[[File:Nuvola Red.png|16px]] [[Rigol DM3068]] (2200000 counts, LAN/USB/GPIB/RS232)
File:RS PRO S2 - 01 - Front.png|link=RS PRO S2|[[File:Nuvola Orange.png|16px]] [[RS PRO S2]] (6000 counts, BLE)
File:Tenma 72-1016.png|link=Tenma 72-1016|[[File:Nuvola Red.png|16px]] [[Tenma 72-1016]] (6000 counts, RS232/USB)
File:Uni-t-ut81b mugshot.png|link=UNI-T UT81B|[[File:Nuvola Red.png|16px]] [[UNI-T UT81B]] (6000 counts, USB)
File:Voltcraft 3850D front transp.png|link=Voltcraft M-3850D|[[File:Nuvola Red.png|16px]] [[Voltcraft M-3850D]] (4000 counts, RS232)
File:Voltcraft m3890dt usb.png|link=Voltcraft M-3890DT|[[File:Nuvola Red.png|16px]] [[Voltcraft M-3890DT]] (4000 counts, USB)
File:Voltcraft m4660a device front.png|link=Voltcraft M-4660A|[[File:Nuvola Red.png|16px]] [[Voltcraft M-4660A]] (20000 counts, RS232)
File:Voltcraft vc890 mugshot.png|link=Voltcraft VC-890|[[File:Nuvola Red.png|16px]] [[Voltcraft VC-890]] (60000 counts, USB/serial)
File:Voltcraft VC-950 - 01 - Front.png|link=Voltcraft VC-950|[[File:Nuvola Orange.png|16px]] [[Voltcraft VC-950]] (100000/10000 counts, serial/USB)
</gallery>

== LCR meters ==

<gallery widths="100Px" heights="100px">
File:Der ee de-5000 mugshot.png|link=DER EE DE-5000|[[File:Nuvola_OK.png|16px]] [[DER EE DE-5000]] (serial)
File:Sigrok_logo_no_text_transparent_512.png|link=MASTECH MS5308|[[File:Nuvola_OK.png|16px]] [[MASTECH MS5308]] (serial)
File:peaktech2165-front.png|link=Peaktech 2165|[[File:Nuvola_OK.png|16px]] [[Peaktech 2165]] (serial)
File:Peaktech 2170 mugshot.png|link=PeakTech 2170|[[File:Nuvola_OK.png|16px]] [[PeakTech 2170]] (serial)
File:uni_t_ut612_1.png|link=UNI-T UT612|[[File:Nuvola_OK.png|16px]] [[UNI-T UT612]] (USB/HID)
File:Voltcraft4080_2.png|link=Voltcraft 4080|[[File:Nuvola_OK.png|16px]] [[Voltcraft 4080]] (serial)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Agilent U1732B.png|link=Agilent U1732B|[[File:Nuvola Red.png|16px]] [[Agilent U1732B]] (IR)
File:Sigrok_logo_no_text_transparent_512.png|link=BK Precision 879B|[[File:Nuvola Red.png|16px]] [[BK Precision 879B]] (USB)
</gallery>

== Sound level meters ==

<gallery widths="100px" heights="100px">
File:CEM DT-8852.png|link=CEM DT-8852|[[File:Nuvola OK.png|16px]] [[CEM DT-8852]] (USB)
File:Colead SL-5868P.png|link=Colead SL-5868P|[[File:Nuvola OK.png|16px]] [[Colead SL-5868P]] (RS232)
File:Kecheng KC-330B.png|link=Kecheng KC-330B|[[File:Nuvola OK.png|16px]] [[Kecheng KC-330B]] (RS232)
File:PCE-322A.png|link=PCE PCE-322A|[[File:Nuvola OK.png|16px]] [[PCE PCE-322A]] (USB)
File:Tondaj sl-814.png|link=Tondaj SL-814|[[File:Nuvola OK.png|16px]] [[Tondaj SL-814]] (USB)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Pce_pce-222_front.png|link=PCE PCE-222|[[File:Nuvola Red.png|16px]] [[PCE PCE-222]] (also: light-/thermo-/hygrometer; RS232)
File:Voltcraft_dl_160s.png|link=Voltcraft DL-160S|[[File:Nuvola Red.png|16px]] [[Voltcraft DL-160S]] (USB)
File:Voltcraft_DL-161S.png|link=Voltcraft DL-161S|[[File:Nuvola Red.png|16px]] [[Voltcraft DL-161S]] (USB)
</gallery>

== Thermometers ==

<gallery widths="100px" heights="100px">
File:rs55ii.png|link=APPA 55II|[[File:Nuvola OK.png|16px]] [[APPA 55II]] (2xtemp, RS232)
File:EL-USB-2.png|link=Lascar Electronics EL-USB-2|[[File:Nuvola OK.png|16px]] [[Lascar Electronics EL-USB-2]] (1xtemp, 1xhum, USB)
File:MASTECH_MS6514_mugshot.png|link=MASTECH MS6514|[[File:Nuvola OK.png|16px]] [[MASTECH MS6514]] (2x temp, USB/serial)
File:Mic 98581.png|link=MIC 98581|[[File:Nuvola OK.png|16px]] [[MIC 98581]] (1xtemp, USB)
File:Mic 98583.png|link=MIC 98583|[[File:Nuvola OK.png|16px]] [[MIC 98583]] (1xtemp, 1xhum, USB)
File:Uni-t ut325 front.png|link=UNI-T UT325|[[File:Nuvola OK.png|16px]] [[UNI-T UT325]] (2xtemp, USB)
File:Voltcraft k204.png|link=Voltcraft K204|[[File:Nuvola OK.png|16px]] [[Voltcraft K204]] (4xtemp, RS232)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Elitech rc3.png|link=Elitech RC-3|[[File:Nuvola Red.png|16px]] [[Elitech RC-3]] (1xtemp, RS232)
File:Escort 19.png|link=Escort 19|[[File:Nuvola Red.png|16px]] [[Escort 19]] (1x temp, RS232)
File:Pax_instruments_t400.jpg|link=Pax Instruments T400|[[File:Nuvola Red.png|16px]] [[Pax Instruments T400]] (4xtemp, USB)
File:Pce_pce-222_front.png|link=PCE PCE-222|[[File:Nuvola Red.png|16px]] [[PCE PCE-222]] (1xtemp, RS232)
File:Rding temper front.png|link=RDing TEMPer|[[File:Nuvola Red.png|16px]] [[RDing TEMPer]] (1xtemp, USB)
File:Rding temper gold device front.png|link=RDing TEMPer Gold|[[File:Nuvola Red.png|16px]] [[RDing TEMPer Gold]] (1xtemp, USB)
File:Rding temper1 device front.png|link=RDing TEMPer1|[[File:Nuvola Red.png|16px]] [[RDing TEMPer1]] (1xtemp, USB)
File:Pcsensor_temper1k2.png|link=RDing TEMPer1K2|[[File:Nuvola Red.png|16px]] [[RDing TEMPer1K2]] (1xtemp, USB)
File:Voltcraft dl-120th.png|link=Voltcraft DL-120TH|[[File:Nuvola Red.png|16px]] [[Voltcraft DL-120TH]] (1xtemp, USB)
File:Voltcraft dl-140th.png|link=Voltcraft DL-140TH|[[File:Nuvola Red.png|16px]] [[Voltcraft DL-140TH]] (1xtemp, USB)
</gallery>

== Hygrometers ==

<gallery widths="100px" heights="100px">
File:EL-USB-2.png|link=Lascar Electronics EL-USB-2|[[File:Nuvola OK.png|16px]] [[Lascar Electronics EL-USB-2]] (temp/humidity, USB)
File:Mic 98583.png|link=MIC 98583|[[File:Nuvola OK.png|16px]] [[MIC 98583]] (temp/humidity, USB)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Pce_pce-222_front.png|link=PCE PCE-222|[[File:Nuvola Red.png|16px]] [[PCE PCE-222]] (also: light-/soundlevelmeter; RS232)
File:Silabs si7005usb dgl eb top.jpg|link=SiLabs Si7005USB-Dongle|[[File:Nuvola Red.png|16px]] [[SiLabs Si7005USB-Dongle]] (USB)
</gallery>

== Anemometers ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Mastech ms6252b.png|link=MASTECH MS6252B|[[File:Nuvola Red.png|16px]] [[MASTECH MS6252B]] (USB)
</gallery>

== Light meters ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Lutron YK-2005LX.png|link=Lutron YK-2005LX|[[File:Nuvola Red.png|16px]] [[Lutron YK-2005LX]] (RS232)
File:Pce_pce-222_front.png|link=PCE PCE-222|[[File:Nuvola Red.png|16px]] [[PCE PCE-222]] (RS232)
</gallery>

== Energy meters ==

<gallery widths="100px" heights="100px">
File:ATORCH J7-c.jpg|link=ATORCH_J7-c|[[File:Nuvola OK.png|16px]] [[ATORCH_J7-c]] (USB tester)
File:Acme.png|link=BayLibre ACME|[[File:Nuvola OK.png|16px]] [[BayLibre ACME]] (I2C)
File:Actaris_a14c5_teleinfo.png|link=EDF Teleinfo|[[File:Nuvola OK.png|16px]] [[EDF Teleinfo]] (RS232)
File:Rdtech-tc66c-mugshot.png|link=RDTech_TC66C|[[File:Nuvola OK.png|16px]] [[RDTech TC66C]] (USB tester)
File:UM24C_display.jpg|link=RDTech_UM_series|[[File:Nuvola OK.png|16px]] [[RDTech UM series]] (USB testers)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">

</gallery>

== DAQs ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Ni usb 6008.png|link=NI USB-6008|[[File:Nuvola Red.png|16px]] [[NI USB-6008]] (8/2 analog inputs/outputs, 12 digital I/Os)
</gallery>

== Dataloggers ==

<gallery widths="100px" heights="100px">
File:EL-USB-CO.png|link=Lascar Electronics EL-USB-CO|[[File:Nuvola OK.png|16px]] [[Lascar Electronics EL-USB-CO]] (carbon monoxide (CO) logger, USB)
File:Testo_435-4.png|link=Testo 435-4|[[File:Nuvola OK.png|16px]] [[Testo 435-4]] (USB)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Gsg_indoor_air_monitor.png|link=GSG Indoor Air Monitor|[[File:Nuvola Red.png|16px]] [[GSG Indoor Air Monitor]] (air quality monitor, USB)
File:Maul_studio_i.png|link=MAUL studio i|[[File:Nuvola Red.png|16px]] [[MAUL studio i]] (weighing scale, RS232)
File:Voltcraft co-20.png|link=Voltcraft CO-20|[[File:Nuvola Red.png|16px]] [[Voltcraft CO-20]] (air quality monitor, USB)
</gallery>

== Tachometers ==

<gallery widths="100px" heights="100px">
File:Uni-t ut372 mugshot.png|link=UNI-T UT372|[[File:Nuvola OK.png|16px]] [[UNI-T UT372]] (USB)
</gallery>

== Scales ==

<gallery widths="100px" heights="100px">
File:Kern ew-6200-2nm mugshot.png|link=KERN scale series|[[File:Nuvola OK.png|16px]] [[KERN scale series]] (RS232)
</gallery>

== Digital loads ==

<gallery widths="100px" heights="100px">
File:Arachnid Labs ReLoad Pro - Mugshot.png|link=Arachnid Labs Reload Pro|[[File:Nuvola OK.png|16px]] [[Arachnid Labs Reload Pro]] (USB)
File:ATORCH DL24MP-150W Purple Picture.jpg|link=ATORCH DL24MP-150W Purple|[[File:Nuvola OK.png|16px]] [[ATORCH DL24MP-150W Purple]]
File:Itech It8511plus frontpanel.png|link=ITECH IT8500 series|[[File:Nuvola OK.png|16px]] [[ITECH IT8500 series]]
File:Maynuo m9812 mugshot.png|link=Maynuo M9812|[[File:Nuvola OK.png|16px]] [[Maynuo M9812]]
File:Ztetech-ebd-usb%2B.png|link=ZKETECH_EBD-USB|[[File:Nuvola OK.png|16px]] [[ZKETECH EBD-USB]]
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Atten ATZ9711.png|link=ATTEN ATZ9711|[[File:Nuvola Red.png|16px]] [[ATTEN ATZ9711]]
File:SIGLENT_SDL1020X-E_-_Mugshot.jpg|link=SIGLENT SDL10X0|[[File:Nuvola Orange.png|16px]] [[SIGLENT SDL10X0]]
</gallery>

== Function generators ==

<gallery widths="100px" heights="100px">
File:Jds6600-mugshot.png|link=Joy-IT JDS6600|[[File:Nuvola OK.png|16px]] [[Joy-IT JDS6600]] (60MHz, USB RS232)
File:Sigrok_logo_no_text_transparent_512.png|link=Rohde&Schwarz SME series|[[file:Nuvola OK.png|16px]] [[Rohde&Schwarz SME series]] (1ch, various, GPIB&RS232)
File:Rigol_DG811_frontpanel.png|link=Rigol DG800 Series|[[File:Nuvola OK.png|16px]] [[Rigol DG800 Series]] (1-2ch, 10/25/35MHz, USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Rigol DG900 Series|[[File:Nuvola OK.png|16px]] [[Rigol DG900 Series]] (2ch, 50/70/100MHz, USB)
File:Dg1000z_series.png|link=Rigol DG1000z Series|[[File:Nuvola OK.png|16px]] [[Rigol DG1000z Series]] (2ch, 25/35/60MHz, USB, LAN)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:BG7TBL small.png|link=BG7TBL|[[File:Nuvola Red.png|16px]] [[BG7TBL]] (138MHz-4.4GHz, PC-based, USB)
File:Hantek DDS-3X25 top.png|link=Hantek DDS-3X25|[[File:Nuvola Red.png|16px]] [[Hantek DDS-3X25]] (25MHz, PC-based, USB)
File:Hp_3325a_front.png|link=HP 3325A|[[File:Nuvola Red.png|16px]] [[HP 3325A]] (20MHz, GPIB)
File:MHINSTEK UDB1305S persp.jpg|link=MHINSTEK UDB1xxxS|[[File:Nuvola Red.png|16px]] [[MHINSTEK UDB1xxxS]] (2/5/8MHz, Serial)
File:MHINSTEK MHS-5200A persp.jpg|link=MHINSTEK MHS-5200A|[[File:Nuvola Orange.png|16px]] [[MHINSTEK MHS-5200A]] (6/12/20/25MHz, USB)
File:Siglent sdg1010 device front 8116.png|link=Siglent SDG1010|[[File:Nuvola Red.png|16px]] [[Siglent SDG1010]] (10MHz, USB)
File:Sigrok_logo_no_text_transparent_512.png|link=Velleman PCG10|[[File:Nuvola Red.png|16px]] [[Velleman PCG10]] (1MHz, PC-based, LPT)
</gallery>

== Frequency counters ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Hantek DDS-3X25 top.png|link=Hantek DDS-3X25|[[File:Nuvola Red.png|16px]] [[Hantek DDS-3X25]] (50MHz, PC-based, USB)
File:HP 5350B.png|link=HP 5350B|[[File:Nuvola Red.png|16px]] [[HP 5350B]] (10Hz-20GHz, GPIB)
</gallery>

== RF receivers ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Per vices noctar.png|link=Per Vices Noctar|[[File:Nuvola Red.png|16px]] [[Per Vices Noctar]] (100kHz-4GHz, IQ modulator/demodulator, PCIe)
</gallery>

== Spectrum analyzers ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Sigrok_logo_no_text_transparent_512.png|link=Siglent SSA3000X series|[[File:Nuvola Red.png|16px]] [[Siglent SSA3000X series]] (9kHz-2.1GHz, USB, Ethernet)
</gallery>

== Power supplies ==

<gallery widths="100px" heights="100px">
File:Sigrok logo no text transparent 512.png|link=Agilent N5700 series|[[File:Nuvola OK.png|16px]] [[Agilent N5700 series]]
File:Atten PPS3203T-3S.png|link=Atten PPS3203T-3S|[[File:Nuvola OK.png|16px]] [[Atten PPS3203T-3S]] (3ch, 2x 0-32V, 1x 0-6V at 0-3A, USB&RS232)
File:Sigrok logo no text transparent 512.png|link=BK Precision 9310|[[File:Nuvola OK.png|16px]] [[BK Precision 9310]]
File:Chroma_61604_front.png|link=Chroma 61604|[[File:Nuvola OK.png|16px]] [[Chroma 61604]] (1ch, 0-300V, 0-16A, 2kVA)
File:Conrad_digi_35_cpu_logo.png|link=Conrad DIGI 35 CPU|[[File:Nuvola OK.png|16px]] [[Conrad DIGI 35 CPU]] (1ch, 0-35V / 0-2.55A, RS232)
File:Envox_eez_h24005_front_panel.jpg|link=Envox EEZ H24005|[[File:Nuvola OK.png|16px]] [[Envox EEZ H24005]] (2ch, USB&LAN)
File:Envox_eez_bb3_enclosure_prototype.jpg|link=Envox EEZ Bench Box 3|[[File:Nuvola OK.png|16px]] [[Envox EEZ Bench Box 3]] (6ch, modular, USB&LAN)
File:Gwinstek-gpd-3303s.png|link=GW Instek GPD series|[[File:Nuvola OK.png|16px]] [[GW Instek GPD series]] (2/3/4ch, 0-30V / 0-3A, USB/serial)
File:Sigrok logo no text transparent 512.png|link=HP 661xC series|[[File:Nuvola OK.png|16px]] [[HP 661xC series]]
File:Agilent-66312a-mugshot.png|link=HP 66312A|[[File:Nuvola OK.png|16px]] [[HP 66312A]] (1ch, 0-20V / 0-2A, GPIB&RS232)
File:HP-6632B_mugshot.png|link=HP 6632B|[[File:Nuvola OK.png|16px]] [[HP 6632B]] (1ch, 0-20V / 0-5A, GPIB&RS232)
File:Velleman ps3005d mugshot.png|link=Korad KAxxxxP series|[[File:Nuvola OK.png|16px]] [[Korad KAxxxxP series]] (1ch, 0-30V / 0-5A, USB&RS232)
File:Manson hcs3202.png|link=Manson HCS-3xxx series|[[File:Nuvola OK.png|16px]] [[Manson HCS-3xxx series]] (1ch, 1-36V / 0-10A, USB)
File:Motech_LPS-301_logo.png|link=Motech LPS-301|[[File:Nuvola OK.png|16px]] [[Motech LPS-301]] (1ch, 1-32V / 0-2A, RS232)
File:Owon_P4603.JPG|link=Owon P4000 series|[[File:Nuvola OK.png|16px]] [[Owon P4000 series]] (1ch, 30V/5A or 60V/3A, RS232)
File:Philips PM2813.png|link=Philips PM2800 series|[[File:Nuvola OK.png|16px]] [[Philips_PM2800_series|Fluke/Philips PM2800 series]]
File:Rdtech-dps.png|link=RDTech DPS series|[[File:Nuvola OK.png|16px]] [[RDTech DPS series]] (1ch, various, USB/BT)
File:RD6006 frontpanel.png|link=RDTech RD series|[[File:Nuvola OK.png|16px]] [[RDTech RD series]] (1ch, 0-60V, 0-6/12/18A, USB/Serial/WiFi)
File:Sigrok logo no text transparent 512.png|link=Rigol DP700 series|[[File:Nuvola OK.png|16px]] [[Rigol DP700 series]]
File:Rigol DP832.png|link=Rigol DP800 series|[[File:Nuvola OK.png|16px]] [[Rigol DP800 series]]
File:rs_hmc8043_mugshot.png|link=Rohde&Schwarz HMC 8043|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz HMC 8043]] (3ch, 0-32V / 0-3A, USB&LXI)
File:rs_hmp4040_mugshot.png|link=Rohde&Schwarz HMP 4000 series|[[File:Nuvola OK.png|16px]] [[Rohde&Schwarz HMP 4000 series]] (3/4ch, 0-32V / 0-10A, USB&LAN)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Sigrok logo no text transparent 512.png|link=Delta Elektronika SM3300 series|[[File:Nuvola Red.png|16px]] [[Delta Elektronika SM3300 series]] (1ch, 18V-660V/3.3kW, USB, RS232, RS485, RS422)
File:Sigrok logo no text transparent 512.png|link=ETommens eTM-xxxxP Series|[[File:Nuvola Orange.png|16px]] [[ETommens eTM-xxxxP Series]] (1ch, various, USB/Serial)
File:Hanmatek_HM305P_front.JPG|link=Hanmatek HM305P|[[File:Nuvola Orange.png|16px]] [[Hanmatek HM305P]] (1ch, 0-30V/0-5A, USB/Serial)
File:Rockseed_rs310p.jpg|link=RockSeed RS310P|[[File:Nuvola Orange.png|16px]] [[RockSeed RS310P]] (1ch, 0-30V/0-10A, USB/Serial)
File:Sigrok logo no text transparent 512.png|link=Siglent SPD3303 series|[[File:Nuvola Orange.png|16px]] [[Siglent SPD3303 series]] (3ch, 0-32V/0-3.2A, USB, LAN)
File:Sigrok logo no text transparent 512.png|link=Voltcraft 18220|[[File:Nuvola Red.png|16px]] [[Voltcraft 18220]] (1ch, 0-40V/0-5A, RS232)
</gallery>

== Multiplexer / Relay actuators ==

<gallery>
File:dcttech_usbrelay_mugshot.png|link=dcttech usbrelay|[[File:Nuvola OK.png|16px]] [[dcttech usbrelay]] (1-8ch, 10A @ 250VAC, 10A @ 30VDC, USB HID)
File:devantech-eth008b-mugshot.png|link=Devantech ETH008|[[File:Nuvola OK.png|16px]] [[Devantech ETH008]] (2-20ch, 250VAC, 16A, Ethernet/Wifi)
File:HP_59306A-mugshot.png|link=HP 59306A|[[File:Nuvola OK.png|16px]] [[HP 59306A]] (6ch, 0.5A @ 28VDC, 0.5A @ 115VAC, GPIB)
File:ICStation_ICSE012A-mugshot.png|link=ICStation USBRelay|[[File:Nuvola OK.png|16px]] [[ICStation USBRelay]] (2-8ch, 10A @ 30VDC, 10A @ 250VAC, USB/Serial)
</gallery>

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery>
File:Gembird-silvershield-front.png|link=Gembird silvershield|[[File:Nuvola Red.png|16px]] [[Gembird silvershield]] (1-4ch, 230V, 10A, USB HID)
</gallery>

== GPIB interfaces ==

'''Work in progress [[File:Nuvola Orange.png|16px]] / planned [[File:Nuvola Red.png|16px]]:'''

<gallery widths="100px" heights="100px">
File:Agilent_82357a_top_cover_removed.jpg|link=Agilent_82357A|[[File:Nuvola Red.png|16px]] [[Agilent 82357A]] (Hardware-based, USB)
File:Ar488-artag-pcb-top.png|link=AR488|[[File:Nuvola Red.png|16px]] [[AR488]] (Arduino based, USB/RS232)
File:Beiming_s82357.png|link=Beiming S82357|[[File:Nuvola Red.png|16px]] [[Beiming S82357]] (hardware-based, USB)
File:ICS 488-USB.png|link=ICS 488-USB|[[File:Nuvola Red.png|16px]] [[ICS 488-USB]] (hardware-based, USB)
File:GPIB-USB 82357B clone.png|link=GPIB-USB 82357B clone|[[File:Nuvola Red.png|16px]] [[GPIB-USB 82357B clone]] (hardware-based, USB)
File:NI GPIB-ENET.png|link=National Instruments GPIB-ENET|[[File:Nuvola Red.png|16px]] [[National Instruments GPIB-ENET]] (hardware-based, Ethernet)
File:NI GPIB-USB-HS.png|link=National Instruments GPIB-USB-HS|[[File:Nuvola Red.png|16px]] [[National Instruments GPIB-USB-HS]] (hardware-based, USB)
File:Prologix-usb.png|link=Prologix GPIB-USB|[[File:Nuvola Red.png|16px]] [[Prologix GPIB-USB]] (firmware-based, USB)
File:GalvantGPIBUSBrev4.JPG|link=Galvant GPIBUSB|[[File:Nuvola Red.png|16px]] [[Galvant GPIBUSB]] (firmware-based, USB, OSHW)
</gallery>

== Potential other candidates ==

If you own any other logic analyzers, oscilloscopes, multimeters, dataloggers, ... and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Join the [https://lists.sourceforge.net/lists/listinfo/sigrok-devel mailing list] or ask on [https://web.libera.chat/#sigrok #sigrok@libera.chat] if you want to help out.

__FORCETOC__

Agilent U1232A

2017-12-30T16:40:10Z

Bert:

{{Infobox multimeter
| image = [[File:Agilent_U1232A.png|180px]]
| name = Agilent U1232A
| status = supported
| source_code_dir = agilent-dmm
| counts = 6000
| categories = CAT III (600V)
| connectivity = [[Device_cables#Agilent_U1173A|USB]], [[Device_cables#Agilent_U1177A|Bluetooth]]
| measurements = voltage, current, resistance, capacitance, no temperature, frequency, duty cycle (?), diode, continuity
| features = autorange, true-rms, data hold, min/max, rel, bargraph, backlight, LED flashlight, data logging (10 readings), auto-poweroff, no non-contact voltage detector (Vsense)
| website = [https://www.keysight.com/en/pd-2000224-pn-U1232A/true-rms-6000-count-handheld-digital-multimeter keysight.com]
}}

The '''Agilent U1232A''' is a 6000 counts, CAT III (600V) handheld digital multimeter with USB or Bluetooth connectivity.

For information about the protocol used to communicate to this multimeter, see the [[Agilent U12xxx series]] page.

== Hardware ==
* [http://documentation.renesas.com/doc/DocumentServer/r01uh0180ej0200_78k0lx3.pdf Renesas 78K0/LF3] 8-bit microcontroller with 60K flash and 2K RAM on board.

== Photos ==
<gallery>
File:Agilent U1232A.jpg|Device, front
File:Agilent U1232A back.jpg|Device, back
File:Agilent U1232A PCB top.jpg|PCB, top
File:Agilent U1232A PCB whitesilk.jpg|White silkscreen (LCD background)
File:Agilent U1232A PCB bottom.jpg|PCB, bottom
File:Agilent U1232A PCB bottom detail.jpg|PCB detail
File:Agilent U1232A PCB MCU.jpg|Microcontroller
</gallery>

== Resources ==
* [http://www.home.agilent.com/en/pd-2000224-pn-U1232A/true-rms-6000-count-handheld-digital-multimeter?pm=PL&nid=-34618.980704&cc=US&lc=eng Agilent U1232A document library]: [http://www.home.agilent.com/agilent/redirector.jspx?action=ref&cname=AGILENT_EDITORIAL&ckey=2043826&lc=eng&cc=US&nfr=-34618.980704.00 datasheet], [http://www.home.agilent.com/agilent/redirector.jspx?action=ref&cname=AGILENT_EDITORIAL&ckey=2049045&lc=eng&cc=US&nfr=-34618.980704.00 manual], ...

[[Category:Device]]
[[Category:Multimeter]]
[[Category:Supported]]

Lutron YK-2005LX

2017-12-02T17:10:56Z

Bert:

[[File:Lutron YK-2005LX.png|thumb|right|Lutron YK-2005LX]]

The [http://www.lutron.com.tw/Default.asp Lutron] [http://www.lutron.com.tw/ugC_ShowroomItem_Detail.asp?hidKindID=2&hidTypeID=114&hidCatID=&hidShowID=734&hidPrdType=&txtSrhData= YK-2005LX] is a light meter with RS-232 connectivity.

== Hardware ==

* [http://www.farnell.com/datasheets/73758.pdf Sharp PC817] photocoupler
* [http://www.szaray.com/D78F9418.pdf NEC D78F9418] 8-bit microcontroller (32KB on-board program flash)

== Photos ==

<gallery>
File:Lutron YK-2005LX.png
File:Lutron YK-2005LX back.jpg
File:Lutron YK-2005LX top.jpg
File:Lutron YK-2005LX side.jpg
File:Lutron YK-2005LX probe.jpg
File:Lutron YK-2005LX PCB front.png
File:Lutron YK-2005LX PCB back.png
</gallery>

== Protocol ==

TODO.

== Resources ==

TODO.

[[Category:Device]]
[[Category:Light meter]]
[[Category:Planned]]

Lutron YK-2005LX

2017-12-02T17:10:01Z

Bert: /* Hardware */

[[File:Lutron YK-2005LX.png|thumb|right|Lutron YK-2005LX]]

The [http://www.lutron.com.tw/Default.asp Lutron] [http://www.lutron.com.tw/ugC_ShowroomItem_Detail.asp?hidKindID=2&hidTypeID=114&hidCatID=&hidShowID=734&hidPrdType=&txtSrhData= YK-2005LX] is a light meter with RS-232 connectivity.

== Hardware ==

* [http://www.farnell.com/datasheets/73758.pdf Sharp PC817] photocoupler
* [http://www.szaray.com/D78F9418.pdf NEC D78F9418] 8-bit microcontroller

== Photos ==

<gallery>
File:Lutron YK-2005LX.png
File:Lutron YK-2005LX back.jpg
File:Lutron YK-2005LX top.jpg
File:Lutron YK-2005LX side.jpg
File:Lutron YK-2005LX probe.jpg
File:Lutron YK-2005LX PCB front.png
File:Lutron YK-2005LX PCB back.png
</gallery>

== Protocol ==

TODO.

== Resources ==

TODO.

[[Category:Device]]
[[Category:Light meter]]
[[Category:Planned]]

Lutron YK-2005LX

2017-12-02T17:00:32Z

Bert:

[[File:Lutron YK-2005LX.png|thumb|right|Lutron YK-2005LX]]

The [http://www.lutron.com.tw/Default.asp Lutron] [http://www.lutron.com.tw/ugC_ShowroomItem_Detail.asp?hidKindID=2&hidTypeID=114&hidCatID=&hidShowID=734&hidPrdType=&txtSrhData= YK-2005LX] is a light meter with RS-232 connectivity.

== Hardware ==

TODO

== Photos ==

<gallery>
File:Lutron YK-2005LX.png
File:Lutron YK-2005LX back.jpg
File:Lutron YK-2005LX top.jpg
File:Lutron YK-2005LX side.jpg
File:Lutron YK-2005LX probe.jpg
File:Lutron YK-2005LX PCB front.png
File:Lutron YK-2005LX PCB back.png
</gallery>

== Protocol ==

TODO.

== Resources ==

TODO.

[[Category:Device]]
[[Category:Light meter]]
[[Category:Planned]]

File:Lutron YK-2005LX PCB back.png

2017-12-02T17:00:14Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

File:Lutron YK-2005LX PCB front.png

2017-12-02T17:00:04Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

DER EE DE-5000

2017-05-01T20:45:17Z

Bert:

{{Infobox multimeter
| image = [[File:DER EE DE-5000.png|180px]]
| name = DER EE DE-5000
| status = supported
| source_code_dir = serial-lcr
| connectivity = USB
| measurements = inductance, capacitance, resistance, DCR
| features = ESR
| website = [http://www.deree.com.tw/de-5000.html deree.com.tw]
}}

The '''DER EE DE-5000''' is a handheld LCR meter with USB connectivity.

== Hardware ==

* [[Multimeter ICs/Cyrustek ES51919|Cyrustek ES51919]]

== Photos ==
<gallery>
File:DER EE DE-5000 back.png
File:DER EE DE-5000 PCB top.png
File:DER EE DE-5000 PCB bottom.png
</gallery>

== Resources ==

* [http://www.deree.com.tw/downloadfiles/28-eng)DE-5000.pdf Datasheet]
* [http://www.eevblog.com/forum/testgear/der-ee-de-5000-unboxing-and-teardown/ Teardown]

[[Category:Device]]
[[Category:LCR meter]]
[[Category:Supported]]

Supported hardware

2017-05-01T20:37:51Z

Bert: /* LCR meters */

DER EE DE-5000

2017-05-01T20:12:46Z

Bert:

{{Infobox multimeter
| image = [[File:DER EE DE-5000.png|180px]]
| name = DER EE DE-5000
| status = supported
| source_code_dir = serial-lcr
| connectivity = USB
| measurements = inductance, capacitance, resistance, DCR
| features = ESR
| website = [http://www.deree.com.tw/de-5000.html deree.com.tw]
}}

The '''DER EE DE-5000''' is a handheld LCR meter with USB connectivity.

== Photos ==
<gallery>
File:DER EE DE-5000 back.png
File:DER EE DE-5000 PCB top.png
File:DER EE DE-5000 PCB bottom.png
</gallery>

== Resources ==

* [http://www.deree.com.tw/downloadfiles/28-eng)DE-5000.pdf Datasheet]
* [http://www.eevblog.com/forum/testgear/der-ee-de-5000-unboxing-and-teardown/ Teardown]

[[Category:Device]]
[[Category:LCR meter]]
[[Category:Supported]]

File:DER EE DE-5000 PCB bottom.png

2017-05-01T20:11:32Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

File:DER EE DE-5000 PCB top.png

2017-05-01T20:01:43Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

File:DER EE DE-5000 back.png

2017-05-01T19:58:03Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

File:DER EE DE-5000.png

2017-05-01T19:57:53Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

HP 3478A

2017-04-14T08:50:44Z

Bert:

{{Infobox multimeter
| image = [[File:HP 3478A.png|180px]]
| name = HP 3478A
| status = planned
| source_code_dir = scpi-dmm
| categories =
| connectivity = [[IEEE-488]]
| measurements = voltage, current, resistance
| features = 4-wire, autoranging
| website = http://www.keysight.com/en/pd-3478A:epsg:pro-pn-3478A/55-digit-dmm-with-hp-ib-interface?&cc=BE&lc=dut
}}

The '''HP 3478A''' is a bench multimeter with GPIB connectivity.

== Photos ==

<gallery>
File:HP 3478A back.jpg
</gallery>

== Resources ==

* [http://literature.cdn.keysight.com/litweb/pdf/03478-90009.pdf Manual]
* [https://www.youtube.com/watch?v=9v6OksEFqpA Teardown video by EEVBlog]
* [https://www.flickr.com/photos/eevblog/sets/72157632806646675/ Teardown photos by EEVBlog]
* [http://www.ko4bb.com/getsimple/index.php?id=download&file=01_ROM_Images_and_Drivers/HP_3478A_03478-65501_dc118.zip ROM dump]

[[Category:Device]]
[[Category:Multimeter]]
[[Category:Planned]]

Connection parameters

2016-04-19T16:40:21Z

Bert: /* Devices using SCPI */

In case a device can not be autodetected or connection to a specific device is required, is is possible to specify the connection
explicitly as an driver option, using the "<driver-name>:conn=<connection>" syntax.

= Digital Multimeters =

Most multimeters use a serial connection. The corresponding [[Device cables|device cables]] either povide an RS232 connection or an USB connection
using an serial to USB-CDC or serial to USB-HID converter chip, see [[Serial port]]. Some devices are available with different data
cables. RS232 and USB-CDC (Virtual Com Port, VCP) cables use a common driver, USB HID cables need a seperate one. If a device has two drivers, the one
for RS232/VCP is typically suffixed with "-ser"

== RS232 / Virtual Com Port ==

<code>conn=<device-path></code>

<tt><device-path></tt> is an absolute path to the wanted device, e.g. <tt>/dev/ttyUSB1</tt> or <tt>/dev/ttyACM0</tt>.

<source lang="bash">
$ sigrok-cli --driver=uni-t-ut61e-ser:conn=/dev/ttyUSB0 -O analog
</source>

== USB HID connections ==

<code>conn=<vendor-id>.<product-id></code>

<tt><vendor-id></tt> and <tt><product-id></tt> have to be specifid as 4 hexadecimal digits.

<code>conn=<bus-nr>.<device-address></code>

<bus-nr> is an integer betwenn 1 and 255, <device-address> is an integer between 1 and 127. The device address changes
every time a device is reconnected. Bus number and device address can e.g. be found using <tt>lsusb</tt>.

<source lang="bash">
$ sigrok-cli --driver=uni-t-ut61e:conn=1a86.e008 -O analog
$ sigrok-cli --driver=uni-t-ut61e:conn=2.12 -O analog
</source>

= Devices using SCPI =

SCPI has several backends. For all backends but serial the backend name is the first parameter, followed by one or more
backend specific parameters.

== Serial / Virtual Com Port ==

Same syntax as for [[Connection_parameters#RS232 / Virtual Com Port|DMMs with serial connection]].

<code>conn=<device-path></code>
<source lang="bash">
$ sigrok-cli --driver=hameg-hmo:conn=/dev/ttyACM0 -O analog -frames 1
</source>

== USBTMC ==

Similar syntax as for [[Connection_parameters#USB HID connections|DMMs with USB HID datacables]].

<code>conn=usbtmc/<vendor-id>.<product-id></code>

<code>conn=usbtmc/<bus-nr>.<device-address></code>

<source lang="bash">
$ sigrok-cli --driver=hameg-hmo:conn=usbtmc/0aad.0119 -O analog -frames 1
</source>

== TCP RAW ==

<code>conn=tcp-raw/<ip-address>/<tcp-port></code>

<source lang="bash">
$ sigrok-cli --driver=hameg-hmo:conn=tcp-raw/192.168.1.20/5025 -O analog -frames 1
</source>

== Linux-GPIB ==

For GPIB devices connected via [http://linux-gpib.sourceforge.net/ linux-gpib], use the <code>libgpib</code> prefix, followed by the device name as defined in your <code>gpib.conf</code> file.

<source lang="bash">
$ sigrok-cli --driver=spci-pps:conn=libgpib/pm2813 -O analog -samples 1
</source>

== VXI ==

Devices using a VXI-based network connection can be specified with the <code>vxi</code> prefix, followed by the hostname (or IP address). Optionally, the instrument name can be added with another <code>/</code> and the name; this defaults to <code>inst0</code>.

<source lang="bash">
$ sigrok-cli --driver=spci-pps:conn=vxi/labps -O analog -samples 1
</source>

= Vendor specific protocols =

Most (all?) devices using a vendor specific protocol use either RS232 or a USB-to-serial converter, thus
the connection string is the same as for [[Connection_parameters#RS232 / Virtual Com Port|DMMs with serial connection]].

Connection parameters

2016-04-18T14:39:42Z

Bert: /* Devices using SCPI */

In case a device can not be autodetected or connection to a specific device is required, is is possible to specify the connection
explicitly as an driver option, using the "<driver-name>:conn=<connection>" syntax.

= Digital Multimeters =

Most multimeters use a serial connection. The corresponding [[Device cables|device cables]] either povide an RS232 connection or an USB connection
using an serial to USB-CDC or serial to USB-HID converter chip, see [[Serial port]]. Some devices are available with different data
cables. RS232 and USB-CDC (Virtual Com Port, VCP) cables use a common driver, USB HID cables need a seperate one. If a device has two drivers, the one
for RS232/VCP is typically suffixed with "-ser"

== RS232 / Virtual Com Port ==

<code>conn=<device-path></code>

<tt><device-path></tt> is an absolute path to the wanted device, e.g. <tt>/dev/ttyUSB1</tt> or <tt>/dev/ttyACM0</tt>.

<source lang="bash">
$ sigrok-cli --driver=uni-t-ut61e-ser:conn=/dev/ttyUSB0 -O analog
</source>

== USB HID connections ==

<code>conn=<vendor-id>.<product-id></code>

<tt><vendor-id></tt> and <tt><product-id></tt> have to be specifid as 4 hexadecimal digits.

<code>conn=<bus-nr>.<device-address></code>

<bus-nr> is an integer betwenn 1 and 255, <device-address> is an integer between 1 and 127. The device address changes
every time a device is reconnected. Bus number and device address can e.g. be found using <tt>lsusb</tt>.

<source lang="bash">
$ sigrok-cli --driver=uni-t-ut61e:conn=1a86.e008 -O analog
$ sigrok-cli --driver=uni-t-ut61e:conn=2.12 -O analog
</source>

= Devices using SCPI =

SCPI has several backends. For all backends but serial the backend name is the first parameter, followed by one or more
backend specific parameters.

== Serial / Virtual Com Port ==

Same syntax as for [[Connection_parameters#RS232 / Virtual Com Port|DMMs with serial connection]].

<code>conn=<device-path></code>
<source lang="bash">
$ sigrok-cli --driver=hameg-hmo:conn=/dev/ttyACM0 -O analog -frames 1
</source>

== USBTMC ==

Similar syntax as for [[Connection_parameters#USB HID connections|DMMs with USB HID datacables]].

<code>conn=usbtmc/<vendor-id>.<product-id></code>

<code>conn=usbtmc/<bus-nr>.<device-address></code>

<source lang="bash">
$ sigrok-cli --driver=hameg-hmo:conn=usbtmc/0aad.0119 -O analog -frames 1
</source>

== TCP RAW ==

<code>conn=tcp-raw/<ip-address>/<tcp-port></code>

<source lang="bash">
$ sigrok-cli --driver=hameg-hmo:conn=tcp-raw/192.168.1.20/5025 -O analog -frames 1
</source>

== Linux-GPIB ==

For GPIB devices connected via [http://linux-gpib.sourceforge.net/ linux-gpib], use the <code>libgpib</code> prefix, followed by the device name as defined in your <code>gpib.conf</code> file.

<source lang="bash">
$ sigrok-cli --driver=spci-pps:conn=libgpib/pm2813 -O analog -samples 1
</source>

= Vendor specific protocols =

Most (all?) devices using a vendor specific protocol use either RS232 or a USB-to-serial converter, thus
the connection string is the same as for [[Connection_parameters#RS232 / Virtual Com Port|DMMs with serial connection]].

Pax Instruments T400

2016-03-29T14:13:53Z

Bert: /* Hardware */

{{Infobox sound level meter
| image = [[File:Pax_instruments_t400.jpg|300px]]
| name = Pax Instruments T400
| status = unsupported
| connectivity = USB serial port
| measurement_range = -270 - 1370 C
| resolution = 0.1 C
| accuracy = 1.5 C
| website = [http://paxinstruments.com/products/sku927/ paxinstruments.com]
}}

The Pax Instruments is a logging thermometer with four thermocouple inputs, USB connectivity, and MicroSD storage. It supports K type thermocouple.

== Hardware ==
* Microcontroller: ATmega32U4, 8 MHz, 3.3 V
* ADC: [http://ww1.microchip.com/downloads/en/DeviceDoc/22088b.pdf MCP3424]
* Junction temperature: [http://ww1.microchip.com/downloads/en/DeviceDoc/21909c.pdf MCP9800]
* Screen: 132x64 LCD

== Protocol ==

The T400 output CSV data in ASCII format over a USB serial port. Upon device boot or when a new log file is starter a header is also output.

Here is a sample of serial output when a new logging session has started.

v0.14-beta
File: LD0041.CSV
time (s), temp_0 (C), temp_1 (C), temp_2 (C), temp_3 (C)
0, 24.86, 24.30, 25.83, 23.48
1, 24.86, 24.30, 25.83, 23.48
2, 24.86, 24.30, 25.83, 23.28
3, 24.79, 24.22, 25.56, 23.21
4, 24.99, 24.22, 25.56, 23.04
5, 24.79, 24.22, 25.56, 23.21
6, 24.74, 24.17, 25.51, 22.99
7, 24.99, 24.22, 25.36, 23.04
8, 24.94, 24.17, 25.31, 22.99
9, 24.94, 24.17, 25.31, 22.99
10, 24.94, 24.17, 25.31, 22.99
11, 24.94, 24.17, 25.31, 22.99

== Resources ==
* [http://paxinstruments.com/products/sku927/ Pax Instruments T400 product page]
* [https://github.com/PaxInstruments/t400-electronics T400 electronics on Github]
* [https://github.com/PaxInstruments/t400-firmware T400 firmward on Github]
* [https://github.com/PaxInstruments/t400-enclosure T400 enclosure on Github]

[[Category:Device]]
[[Category:Thermometer]]
[[Category:Unupported]]

MediaWiki:Sidebar

2016-03-11T21:51:52Z

Bert:

Korad KAxxxxP series

2015-11-28T14:13:16Z

Bert: /* Protocol */

{{Infobox power supply
| image = [[File:Velleman ps3005d mugshot.png|180px]]
| name = Korad KDxxxxP
| status = supported
| source_code_dir = korad-kdxxxxp
| channels = 1
| channel1 = various
| channel2 =
| channel3 =
| channel4 =
| connectivity = USB/serial
| features = programmable presets
| website = [http://koradtechnology.com/en/cp3-1.html koradtechnology.com]
}}

The '''Korad KDxxxxP''' series are 1 channel switch-mode programmable power supplies with USB/serial connectivity.

The devices are also sold as rebranded versions by e.g. Velleman.

== Devices ==

{| border="0" style="font-size: smaller" class="alternategrey sortable sigroktable"
|-
!Korad
!Velleman OEM
!Voltage range
!Current range
!Power

|-
| ?
| [[Velleman PS3005D]]
| style="text-align:center" | 0-30 V
| style="text-align:center" | 0-5 A
| 150 W

|-
| ?
| [[Velleman LABPS3005D]]
| style="text-align:center" | 0-30 V
| style="text-align:center" | 0-5 A
| 150 W

|}

== Protocol ==

The protocol is serial or serial-over-USB, 9600 8N1, (almost fully) ASCII based. No line termination, CRC or checksum characters are used. The PC sends a request string which the power supply then responds to.

During a PC connection, the front control buttons and the scrollwheel are blocked.

{| border="0" style="font-size: smaller" class="alternategrey sigroktable"
|-
! Request
! Example output
! Remarks

|-
| *IDN?
| VELLEMANPS3005DV2.0
KORADKA3005PV2.0
| Request identification from device

|-
| STATUS?
| (byte)
| Request the actual status. The output is a single byte with the actual status encoded in bits. At least the Velleman PS3005D V2.0 is a bit buggy here. The only reliable bits are: 0x40 (Output mode: 1:on, 0:off), 0x20 (OVP and/or OCP mode: 1:on, 0:off) and 0x01 (CV/CC mode: 1:CV, 0:CC)
|-
| VSET1?
| 12.34
| Request the voltage as set by the user.

|-
| VSET1:12.34
| (none)
| Set the maximum output voltage.

|-
| VOUT1?
| 12.34
| Request the actual voltage output.

|-
| ISET1?
| 0.125
| Request the current as set by the user.

|-
| ISET1:0.125
| (none)
| Set the maximum output current.

|-
| IOUT1?
| 0.125
| Request the actual output current.

|-
| OUT1
| (none)
| Enable the power output.

|-
| OUT0
| (none)
| Disable the power output.

|-
| OVP1
| (none)
| Enable the "Over Voltage Protection", the PS will switch off the output when the voltage raises above the actual level.

|-
| OVP0
| (none)
| Disable the "Over Voltage Protection".

|-
| OCP1
| (none)
| Enable the "Over Current Protection", the PS will switch off the output when the current raises above the actual level.

|-
| OCP0
| (none)
| Disable the "Over Current Protection".

|-
| TRACK0
| (none)
| Set multichannel mode, 0 independent, 1 series, 2 parallel (from Velleman protocol v1.3 documentation)

|-
| RCL1
| (none)
| Recalls voltage and current limits from memory, 1 to 5. (from Velleman protocol v2.0 documentation)

|-
| SAV1
| (none)
| Saves voltage and current limits to memory, 1 to 5. (from Velleman protocol v2.0 documentation)

|}

'''Remarks''':
# The digit 1 in the V... and I... requests indicates the values are meant for channel one. In future (or "higher"?) models this may be two for a second channel and so on.
# Voltage ("00.00" to "31.00" V) and current ("0.000" to "5.100" A) output values have a fixed length with fixed dot position. The values won't become negative.
# ISET1? replies sixth byte on many models (all?) which is sixth character from *IDN? reply if *IDN? is queried before during same power cycle. This is byte read and discarded by sigrok.

== Resources ==

* [http://koradtechnology.com/en/cp2-1.html Korad digital control DC power supplies (KAxxxxD)]
* [http://koradtechnology.com/en/cp3-1.html Korad programmable DC power supplies (KAxxxxP)]
* [http://koradtechnology.com/en/cp4-1.html Korad digital control DC electronic loads]
* [http://koradtechnology.com/en/cp5-1.html Korad programmable DC electronic loads]
* [http://koradtechnology.com/en/Products.html Korad encoder control DC power supplies (KDxxxxP)]

[[Category:Device]]
[[Category:Power supply]]
[[Category:Supported]]

Main Page

2015-11-04T19:25:41Z

Bert:

<table width="100%" valign="top"><tr valign="top"><td width="80%">
<div style="margin-bottom:1.5em; padding:0.5em 0.5em 0.5em 0.5em; background-color:#cfdfff; align:right; border:1px solid #aabbcc;">
The '''sigrok''' project aims at creating a '''portable, cross-platform, Free/Libre/Open-Source signal analysis software suite''' that supports various device types (e.g. [[Supported hardware#Logic_analyzers|logic analyzers]], [[Supported hardware#Oscilloscopes|oscilloscopes]], and [[Supported hardware|many more]]).

It is licensed under the terms of the '''GNU GPL, version 3 or later'''. Design goals and features include:


* '''Broad hardware support'''. Supports [[Supported hardware|many different devices]] (logic analyzers, oscilloscopes, multimeters, data loggers etc.) from various vendors.
* '''Cross-platform'''. Works on [[Linux]], [[Mac OS X]], [[Windows]], [[FreeBSD]], [[OpenBSD]], [[NetBSD]], [[Android]] (and on x86, ARM, Sparc, PowerPC, ...).
* '''Scriptable protocol decoding'''. Extendable with stackable [[protocol decoders]] written in Python 3.
* '''File format support'''. Supports various [[Input output formats|input/output file formats]] (binary, ASCII, hex, CSV, gnuplot, [http://en.wikipedia.org/wiki/Value_change_dump VCD], WAV, ...).
* '''Reusable libraries'''. Consists of the [[libsigrok]] and [[libsigrokdecode]] shared libraries which can be used by various frontends/GUIs.
* '''Various frontends'''. [[PulseView]] (LA GUI), [[sigrok-meter]] (DMM GUI), [[sigrok-cli]] (command-line), and other frontends all build upon the above libraries.

</div>

<div style="clear: both;">

<div style="width: 50%; float: left; margin-bottom: 1em;">
{{Box|
BORDER = #8898bf|
BACKGROUND = #d1adf6|
WIDTH = 100%|
ICON = |
HEADING = [[File:Sigrok_stone.png]] [//sigrok.org/blog News]|
CONTENT =

<rss max=3 date="Y-m-d">http://sigrok.org/blog/rss.xml</rss>
See also: [[Current events]].

}}
</div>

<div style="width: 49%; float: right; margin-bottom: 1em;">
{{Box|
BORDER = #8898bf|
BACKGROUND = lime|
WIDTH = 100%|
ICON = |
HEADING = [[File:Sigrok_stone.png]] Supported hardware ([[:Category:Device|Browse by category...]])|
CONTENT =

[[Supported_hardware#Logic_analyzers|Logic analyzers]] · [[Supported_hardware#Mixed-signal_devices|Mixed-signal devices]] · [[Supported_hardware#Oscilloscopes|Oscilloscopes]] · [[Supported_hardware#Multimeters|Multimeters]] · [[Supported_hardware#LCR meters|LCR meters]] · [[Supported_hardware#Sound_level_meters|Sound level meters]] · [[Supported_hardware#Thermometers|Thermometers]] · [[Supported_hardware#Hygrometers|Hygrometers]] · [[Supported_hardware#Anemometers|Anemometers]] · [[Supported_hardware#Light meters|Light meters]] · [[Supported_hardware#Energy meters|Energy meters]] · [[Supported_hardware#DAQs|DAQs]] · [[Supported_hardware#Dataloggers|Dataloggers]] · [[Supported_hardware#Tachometers|Tachometers]] · [[Supported_hardware#Scales|Scales]] · [[Supported_hardware#Digital_loads|Digital loads]] · [[Supported_hardware#Function_generators|Function generators]] · [[Supported_hardware#RF receivers|RF receivers]] · [[Supported_hardware#Spectrum_analyzers|Spectrum analyzers]] · [[Supported_hardware#Power_supplies|Power supplies]] · [[Supported_hardware#GPIB_interfaces|GPIB interfaces]]

See also: [[:Category:Device comparison|Device comparisons]], [[Device cables]], [[Multimeter ICs]]

}}
</div>

</div>

<div style="clear: both;">

<div style="width: 50%; float: left; margin-bottom: 1em;">
{{Box|
BORDER = #8898bf|
BACKGROUND = cyan|
WIDTH = 100%|
ICON = |
HEADING = [[File:Sigrok_stone.png]] Documentation|
CONTENT =

[[Building]] · [[Linux]] · [[Mac OS X]] · [[Windows]] · [[FreeBSD]] · [[OpenBSD]] · [[NetBSD]] · [[Android]] · [[Embedded]] · [[Input output formats]] · [[Protocol decoders]] · [[Probe comparison]] · [[GPIB]] · [[Logo]] · [[Press]]

}}
</div>

<div style="width: 49%; float: right; margin-bottom: 1em;">
{{Box|
BORDER = #8898bf|
BACKGROUND = #ff3333|
WIDTH = 100%|
ICON = |
HEADING = [[File:Sigrok_stone.png]] Subprojects|
CONTENT =

[[libserialport]] · [[libsigrok]] · [[libsigrokdecode]] · [[sigrok-cli]] · [[PulseView]] · [[sigrok-meter]]  · [[fx2lafw]] · [[gpibgrok]] · [[fx2grok]] · [[fpgalafw]] · [[Firmware]] · [[Example dumps]]

}}
</div>

<div style="clear: both;">

<div style="width: 50%; float: left; margin-bottom: 1em;">
{{Box|
BORDER = #8898bf|
BACKGROUND = yellow|
WIDTH = 100%|
ICON = |
HEADING = [[File:Sigrok_stone.png]] Getting in touch|
CONTENT =

Mailing list: [https://lists.sourceforge.net/lists/listinfo/sigrok-devel sigrok-devel] ([http://news.gmane.org/gmane.comp.debugging.sigrok.devel archive]) · IRC: [irc://chat.freenode.net/sigrok #sigrok] · Twitter: [https://twitter.com/sigrokproject @sigrokproject] · Google+: [https://plus.google.com/communities/109843678338531936878 sigrok community]

}}
</div>

<div style="width: 49%; float: right; margin-bottom: 1em;">
{{Box|
BORDER = #8898bf|
BACKGROUND = lightblue|
WIDTH = 100%|
ICON = |
HEADING = [[File:Sigrok_stone.png]] Development|
CONTENT =

[[Developers]] · [[Roadmap]] · [//sigrok.org/api/index.html API docs] ([//sigrok.org/api/libserialport/unstable/index.html sp] · [//sigrok.org/api/libsigrok/unstable/index.html sr]/[//sigrok.org/api/libsigrok/unstable/bindings/cxx/index.html cxx]/[//sigrok.org/api/libsigrok/unstable/bindings/python/index.html py]/[//sigrok.org/api/libsigrok/unstable/bindings/java/index.html java] · [//sigrok.org/api/libsigrokdecode/unstable/index.html srd]) · [//sigrok.org/gitweb/ Browse source code] · [//sigrok.org/bugzilla/ Bug tracker] · [//sigrok.org/jenkins/ Jenkins] · [[Protocol decoder HOWTO]] · [[Protocol decoder API]] · [[Formats and structures]] · [[Hardware driver API]] · [[Portability]] · [[TODO]]

}}
</div>

</div>

<div style="clear: both;margin-top: 2em;">
----

'''IMPORTANT: Unless explicitly specified otherwise, all contents in this wiki (including text and images) are released under the CC-BY-SA 3.0 license. If you don't want that, please explicitly specify another free-ish license when adding pages/images!'''

</div>
__NOTOC__
__NOEDITSECTION__

Sysclk SLA5032

2015-10-19T21:42:48Z

Bert: /* Hardware */

{{Infobox logic analyzer
| image = [[File:Sysclk sla5032 mugshot.png|180px]]
| name = Sysclk SLA5032
| status = in progress
| source_code_dir =
| channels = 32
| samplerate =
| samplerate_state = ?
| triggers =
| voltages =
| threshold = ?
| memory =
| compression =
| website = [http://de.aliexpress.com/item/500M-32-channel-logic-analyzer-compatible-LOGIC-16-accurate-indicator-actual-parameters/32286574687.html aliexpress.com]
}}

The '''Sysclk SLA5032''' is a USB-based, 32-channel logic analyzer with up to 500MHz sampling rate.

See [[Sysclk SLA5032/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

'''Main board'''
* '''Microcontroller''': [http://www.atmel.com/devices/ATMEGA8A.aspx Atmel Atmega8A] ([http://www.atmel.com/Images/Atmel-8159-8-bit-AVR-microcontroller-ATmega8A_datasheet.pdf datasheet])
* '''USB interface chip''': [http://www.cypress.com/part/cy7c68013a-56ltxi Cypress CY7C68013A-56LTXI (FX2LP)] ([http://www.cypress.com/?docID=34060 datasheet])
* '''32Kbytes I2C EEPROM''': [http://www.atmel.com/devices/at24c256c.aspx Atmel 24C256N] ([http://www.atmel.com/Images/doc5121.pdf datasheet])
* '''256bytes I2C EEPROM''': [http://www.atmel.com/devices/at24c02c.aspx Atmel 24C02N] ([http://www.atmel.com/Images/doc3256.pdf datasheet])
* '''3.3V voltage regulator''': [http://www.advanced-monolithic.com/products/voltreg.html#1117 Advanced Monolithic Systems AMS1117-3.3] ([http://ams-semitech.com/attachments/File/AMS1117_20120314.pdf datasheet], [http://www.advanced-monolithic.com/pdf/ds1117.pdf older datasheet])
* '''DC-DC buck regulator''': 4x [http://www.aosmd.com/products/power-ics/ezbuck-dc-dc-buck-regulators/AOZ1021AI Alpha and Omega AOZ1021AI] ([http://www.aosmd.com/res/data_sheets/AOZ1021AI.pdf datasheet])
* '''Crystal''': 1x 24MHz

'''SODIMM daughterboard'''
* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6/lx.html Xilinx Spartan XC6SLX16] ([http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf datasheet])
* '''8MByte SPI NOR flash''': 2x [http://www.macronix.com/en-us/Product/Pages/ProductDetail.aspx?PartNo=MX25L6445E Macronix MX25L6445E] ([http://www.macronix.com/Lists/DataSheet/Attachments/2474/MX25L6445E,%203V,%2064Mb,%20v1.8.pdf datasheet])
* '''1Gbit DDR2 SDRAM''': 2x [http://www.micron.com/parts/dram/ddr2-sdram/mt47h64m16hr-25e Micron MT47H64M16HR-25E:H] (markings: "5DHI7 D9LHT") ([http://www.micron.com/~/media/documents/products/data-sheet/dram/ddr2/1gb_ddr2.pdf datasheet])
* '''Crystal''': 100MHz

== Photos ==

<gallery>
File:Sysclk sla5032 device with cable.jpg
File:Sysclk sla5032 device top.jpg
File:Sysclk sla5032 device bottom.jpg
File:Sysclk sla5032 device usb.jpg
File:Sysclk sla5032 device connector.jpg
File:Sysclk sla5032 usb cable.jpg
File:Sysclk sla5032 probes.jpg
File:Sysclk sla5032 pcb top1.jpg
File:Sysclk sla5032 pcb top2.jpg
File:Sysclk sla5032 pcb bottom.jpg
File:Sysclk sla5032 pcb module top.jpg
File:Sysclk sla5032 pcb module bottom.jpg
File:Sysclk sla5032 mx25l6445e 100mhz crystal.jpg
File:Sysclk sla5032 mx25l6445e.jpg
File:Sysclk sla5032 fx2.jpg
File:Sysclk sla5032 atmel 24c256n.jpg
File:Sysclk sla5032 atmel 24c02n.jpg
File:Sysclk sla5032 atmega8a 24mhz crystal.jpg
File:Sysclk sla5032 ams1117 y125.jpg
File:Sysclk sla5032 z1021ai.jpg
</gallery>

== Resources ==

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:In progress]]

HP 3478A

2015-09-02T15:42:41Z

Bert: Created page with "{{Infobox multimeter | image = 180px | name = HP 3478A | status = planned | source_code_dir = scpi-dmm | categories =..."

File:HP 3478A back.jpg

2015-09-02T15:39:55Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

File:HP 3478A.png

2015-09-02T15:39:46Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

Keithley 195T

2015-09-02T15:35:46Z

Bert: Created page with "{{Infobox multimeter | image = 180px | name = Keithley 195T | status = planned | source_code_dir = scpi-dmm | categori..."

{{Infobox multimeter
| image = [[File:Keithley 195T.png|180px]]
| name = Keithley 195T
| status = planned
| source_code_dir = scpi-dmm
| categories =
| connectivity = [[IEEE-488]]
| measurements = voltage, current, resistance
| features = 4-wire, autoranging
| website =
}}

The '''Keithley 195T''' is a bench multimeter with GPIB connectivity.

== Photos ==

<gallery>
File:Keithley 195T back.jpg
</gallery>

== Resources ==

* [http://www.manual-hub.com/manuals/keithley-195t-pdf-manual.html Manual]

[[Category:Device]]
[[Category:Multimeter]]
[[Category:Planned]]

File:Keithley 195T back.jpg

2015-09-02T15:18:52Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

File:Keithley 195T.png

2015-09-02T15:18:45Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

Fluke 45

2015-09-02T15:15:23Z

Bert: Created page with "{{Infobox multimeter | image = | name = Fluke 45 | status = planned | source_code_dir = scpi-dmm | categories = | connectivity = IEEE..."

{{Infobox multimeter
| image =
| name = Fluke 45
| status = planned
| source_code_dir = scpi-dmm
| categories =
| connectivity = [[IEEE-488]], RS-232
| measurements = voltage, current, resistance, frequency, diode, continuity
| features = 4-wire, autoranging
| website = http://www.fluke.com/fluke/m3en/digital-multimeters/fluke-45.htm?pid=56082
}}

The '''Fluke 45''' is a bench multimeter with GPIB and RS-232 connectivity.

== Photos ==

<gallery>
</gallery>

== Resources ==

* [http://www.fluke.com/Fluke/m3en/Support/Manuals/default.htm?ProductId=56082 Manuals]

[[Category:Device]]
[[Category:Multimeter]]
[[Category:Planned]]

Multimeter ICs/Cyrustek ES51919

2015-08-27T16:24:35Z

Bert:

The Cyrustek 51919 is used in LCR meters. The chip takes no commands, and continually outputs 17-byte packets structured as described below.

{| border="0" width="100%" class="alternategrey sigroktable"
|-
! style="width: 3em;" | Byte
! Description
|-
| 0-1
| Header, always <code>0x00 0x0d</code>
|-
| valign="top" | 2
| Flags
{| border="0" style="font-size: smaller;" class="alternategrey "
|-
| 0
| hold enabled
|-
| 1
| reference shown (in delta mode)
|-
| 2
| delta mode
|-
| 3
| calibration mode
|-
| 4
| sorting mode
|-
| 5
| LCR mode
|-
| 6
| auto mode
|-
| 7
| parallel measurement (vs. serial)
|}
|-
| valign="top" | 3
| Configuration
{| border="0" style="font-size: smaller;" class="alternategrey "
|-
| 0-4
| unknown
|-
| 5-7
| test frequency
|-
|
| 0 100 Hz
|-
|
| 1 120 Hz
|-
|
| 2 1 KHz
|-
|
| 3 10 KHz
|-
|
| 4 100 KHz
|-
|
| 5 0 Hz (DC)
|}
|-
| valign="top" | 4
| Tolerance (sorting mode)
{| border="0" style="font-size: smaller;" class="alternategrey "
|-
| 0
| not set
|-
| 3
| ±0.25%
|-
| 4
| ±0.5%
|-
| 5
| ±1%
|-
| 6
| ±2%
|-
| 7
| ±5%
|-
| 8
| ±10%
|-
| 9
| ±20%
|-
| 10
| -20+80%
|}
|-
| 5-9
| Primary measurement
|-
| 10-14
| Secondary measurement
|-
| 15-16
| Footer, always <code>0x0d 0x0a</code>
|}

Multimeter ICs/Cyrustek ES51919

2015-08-27T12:47:40Z

Bert: Created page with "The Cyrustek 51919 is used in LCR meters. The chip takes no commands, and continually outputs 17-byte packets structured as described below. {| border="0" width="100%" style=..."

The Cyrustek 51919 is used in LCR meters. The chip takes no commands, and continually outputs 17-byte packets structured as described below.

{| border="0" width="100%" style="font-size: smaller;" class="alternategrey sigroktable"
|-
! style="width: 3em;" | Byte
! Description
|-
| 0-1
| Header, always <code>0x00 0x0d</code>
|-
| valign="top" | 2
| Flags
{| border="0" style="font-size: smaller;" class="alternategrey "
|-
| 0
| hold enabled
|-
| 1
| reference shown (in delta mode)
|-
| 2
| delta mode
|-
| 3
| calibration mode
|-
| 4
| sorting mode
|-
| 5
| LCR mode
|-
| 6
| auto mode
|-
| 7
| parallel measurement (vs. serial)
|}
|-
| 3
| Configuration
|-
| 4
| Tolerance
|-
| 5-9
| Primary measurement
|-
| 10-14
| Secondary measurement
|-
| 15-16
| Footer, always <code>0x0d 0x0a</code>
|}

InsideGadgets Logic Observer

2015-08-23T18:08:10Z

Bert: /* USB_SETTINGS (2) */

{{Infobox logic analyzer
| image =
| name = insideGadgets Logic Observer
| status = planned
| source_code_dir =
| channels = 8
| samplerate = 50MHz
| samplerate_state = —
| triggers = high, low
| voltages = 2V — 5.5V
| threshold = ?
| memory = 131ksamples/ch
| compression = none
| website = [https://www.insidegadgets.com/projects/logic-observer/ insidegadgets.com]
}}

The '''insideGadgets Logic Observer''' is an 8-channel logic analyzer with up to 50MHz sampling rate. It is a mostly open project with all source code (CPLD, MCU) available, as well as a schematic of the PCB.

See [[insideGadgets Logic Observer/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

* [http://www.atmel.com/devices/atmega168pa.aspx Atmel ATmega168]
* [https://www.altera.com/en_US/pdfs/literature/ds/m3000a.pdf Altera MAX 3000A CPLD]
* [http://www.cypress.com/documentation/datasheets/cy7c1018dv33-cy7c1019dv33-1-mbit-128-k-8-static-ram Cypress 1 Mbit SRAM]

== Protocol ==

The device is controlled entirely via USB control messages. The command is encoded in the '''request''' value of the control message; '''value''' and '''index''' are unused.

The following requests are defined:

=== USB_TRANSFER (1) ===

This tells the device to transfer the samples captured in memory to the host. This is called multiple times; the buffer memory is transferred 254 bytes at a time, with the address increasing automatically. The address is reset when a capture is started or settings are updated.

=== USB_SETTINGS (2) ===

Send new settings to the device. The settings consist of the following eight bytes sent along with the control request:

{| border="0" style="font-size: smaller;" class="alternategrey sigroktable"
|-
! Byte
! Description
|-
| 0
| Bitmask of the channels to trigger on. All channels marked according to the trigger level must match before a trigger is considered to have fired.
|-
| 1
| Level to trigger on (0 or 1).
|-
| 2
| Delay after trigger, in milliseconds.
|-
| 3
| Trigger count: number of times the trigger must fire before the capture starts.
|-
| valign="top" | 4
| Sample rate, as follows:
{| border="0" style="font-size: smaller;" class="alternategrey "
|-
! Value
! Sample rate
|-
| 80
| 50 MS/S
|-
| 0
| 10 MS/S
|-
| 1
| 5 MS/S
|-
| 3
| 2.5 MS/S
|-
| 9
| 1 MS/S
|-
| 19
| 500 KS/S
|-
| 39
| 250 KS/S
|-
| 99
| 100 KS/S
|}
|-
| 5
| Number of samples to capture
|-
| 6
| Start capture flag: a capture is started if this is not 0.
|-
| 7
| Always 0.
|}

=== USB_STATUS (3) ===

Returns a 2-byte status field. The first byte indicates whether capturing has finished (1) or not (0). The second byte is always 0.

=== USB_CANCEL (4) ===

This cancels a capture in progress.

== Resources ==

* [https://www.insidegadgets.com/wp-content/uploads/2015/03/Logic_Observer_v1.0_Manual_Rev2.pdf Manual]
* [https://www.insidegadgets.com/wp-content/uploads/2015/03/Logic_Observer_v1.0_Rev2.zip CPLD/MCU source code]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Planned]]

InsideGadgets Logic Observer

2015-08-23T18:07:51Z

Bert:

{{Infobox logic analyzer
| image =
| name = insideGadgets Logic Observer
| status = planned
| source_code_dir =
| channels = 8
| samplerate = 50MHz
| samplerate_state = —
| triggers = high, low
| voltages = 2V — 5.5V
| threshold = ?
| memory = 131ksamples/ch
| compression = none
| website = [https://www.insidegadgets.com/projects/logic-observer/ insidegadgets.com]
}}

The '''insideGadgets Logic Observer''' is an 8-channel logic analyzer with up to 50MHz sampling rate. It is a mostly open project with all source code (CPLD, MCU) available, as well as a schematic of the PCB.

See [[insideGadgets Logic Observer/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

* [http://www.atmel.com/devices/atmega168pa.aspx Atmel ATmega168]
* [https://www.altera.com/en_US/pdfs/literature/ds/m3000a.pdf Altera MAX 3000A CPLD]
* [http://www.cypress.com/documentation/datasheets/cy7c1018dv33-cy7c1019dv33-1-mbit-128-k-8-static-ram Cypress 1 Mbit SRAM]

== Protocol ==

The device is controlled entirely via USB control messages. The command is encoded in the '''request''' value of the control message; '''value''' and '''index''' are unused.

The following requests are defined:

=== USB_TRANSFER (1) ===

This tells the device to transfer the samples captured in memory to the host. This is called multiple times; the buffer memory is transferred 254 bytes at a time, with the address increasing automatically. The address is reset when a capture is started or settings are updated.

=== USB_SETTINGS (2) ===

Send new settings to the device. The settings consist of the following eight bytes sent along with the control request:

{| border="0" style="font-size: smaller;" class="alternategrey sigroktable"
|-
! Byte
! Description
|-
| 0
| Bitmask of the channels to trigger on. All channels marked according to the
trigger level must match before a trigger is considered to have fired.
|-
| 1
| Level to trigger on (0 or 1).
|-
| 2
| Delay after trigger, in milliseconds.
|-
| 3
| Trigger count: number of times the trigger must fire before the capture starts.
|-
| valign="top" | 4
| Sample rate, as follows:
{| border="0" style="font-size: smaller;" class="alternategrey "
|-
! Value
! Sample rate
|-
| 80
| 50 MS/S
|-
| 0
| 10 MS/S
|-
| 1
| 5 MS/S
|-
| 3
| 2.5 MS/S
|-
| 9
| 1 MS/S
|-
| 19
| 500 KS/S
|-
| 39
| 250 KS/S
|-
| 99
| 100 KS/S
|}
|-
| 5
| Number of samples to capture
|-
| 6
| Start capture flag: a capture is started if this is not 0.
|-
| 7
| Always 0.
|}

=== USB_STATUS (3) ===

Returns a 2-byte status field. The first byte indicates whether capturing has finished (1) or not (0). The second byte is always 0.

=== USB_CANCEL (4) ===

This cancels a capture in progress.

== Resources ==

* [https://www.insidegadgets.com/wp-content/uploads/2015/03/Logic_Observer_v1.0_Manual_Rev2.pdf Manual]
* [https://www.insidegadgets.com/wp-content/uploads/2015/03/Logic_Observer_v1.0_Rev2.zip CPLD/MCU source code]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Planned]]

InsideGadgets Logic Observer

2015-08-22T22:11:36Z

Bert:

{{Infobox logic analyzer
| image =
| name = insideGadgets Logic Observer
| status = planned
| source_code_dir =
| channels = 8
| samplerate = 50MHz
| samplerate_state = —
| triggers = high, low
| voltages = 2V — 5.5V
| threshold = ?
| memory = 131ksamples/ch
| compression = none
| website = [https://www.insidegadgets.com/projects/logic-observer/ insidegadgets.com]
}}

The '''insideGadgets Logic Observer''' is an 8-channel logic analyzer with up to 50MHz sampling rate. It is a mostly open project with all source code (CPLD, MCU) available, as well as a schematic of the PCB.

See [[insideGadgets Logic Observer/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

* [http://www.atmel.com/devices/atmega168pa.aspx Atmel ATmega168]
* [https://www.altera.com/en_US/pdfs/literature/ds/m3000a.pdf Altera MAX 3000A CPLD]
* [http://www.cypress.com/documentation/datasheets/cy7c1018dv33-cy7c1019dv33-1-mbit-128-k-8-static-ram Cypress 1 Mbit SRAM]

== Protocol ==

The device is controlled entirely via USB control messages. The command is encoded in the '''request''' value of the control message; '''value''' and '''index''' are unused.

The following requests are defined:

=== USB_TRANSFER (1) ===

This tells the device to transfer the samples captured in memory to the host. This is called multiple times; the buffer memory is transferred 254 bytes at a time, with the address increasing automatically. The address is reset when a capture is started or settings are updated.

=== USB_SETTINGS (2) ===

Send new settings to the device. The settings consist of the following eight bytes sent along with the control request:

{| border="0" style="font-size: smaller;" class="alternategrey sigroktable"
|-
! Byte
! Description
|-
| 0
| Channel to trigger on.
|-
| 1
| Level to trigger on (0 or 1).
|-
| 2
| '''Delay after trigger.'''
|-
| 3
| '''trigger count'''
|-
| 4
| '''Sample rate.'''
|-
| 5
| Number of samples to capture
|-
| 6
| Start capture flag: a capture is started if this is not 0.
|-
| 7
| Always 0.
|}

=== USB_STATUS (3) ===

=== USB_CANCEL (4) ===

== Resources ==

* [https://www.insidegadgets.com/wp-content/uploads/2015/03/Logic_Observer_v1.0_Manual_Rev2.pdf Manual]
* [https://www.insidegadgets.com/wp-content/uploads/2015/03/Logic_Observer_v1.0_Rev2.zip CPLD/MCU source code]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Planned]]

InsideGadgets Logic Observer

2015-08-22T22:11:17Z

Bert: Created page with "{{Infobox logic analyzer | image = | name = insideGadgets Logic Observer | status = supported | source_code_dir = | channels = 8 |..."

{{Infobox logic analyzer
| image =
| name = insideGadgets Logic Observer
| status = supported
| source_code_dir =
| channels = 8
| samplerate = 50MHz
| samplerate_state = —
| triggers = high, low
| voltages = 2V — 5.5V
| threshold = ?
| memory = 131ksamples/ch
| compression = none
| website = [https://www.insidegadgets.com/projects/logic-observer/ insidegadgets.com]
}}

The '''insideGadgets Logic Observer''' is an 8-channel logic analyzer with up to 50MHz sampling rate. It is a mostly open project with all source code (CPLD, MCU) available, as well as a schematic of the PCB.

See [[insideGadgets Logic Observer/Info]] for more details (such as '''lsusb -v''' output) about the device.

== Hardware ==

* [http://www.atmel.com/devices/atmega168pa.aspx Atmel ATmega168]
* [https://www.altera.com/en_US/pdfs/literature/ds/m3000a.pdf Altera MAX 3000A CPLD]
* [http://www.cypress.com/documentation/datasheets/cy7c1018dv33-cy7c1019dv33-1-mbit-128-k-8-static-ram Cypress 1 Mbit SRAM]

== Protocol ==

The device is controlled entirely via USB control messages. The command is encoded in the '''request''' value of the control message; '''value''' and '''index''' are unused.

The following requests are defined:

=== USB_TRANSFER (1) ===

This tells the device to transfer the samples captured in memory to the host. This is called multiple times; the buffer memory is transferred 254 bytes at a time, with the address increasing automatically. The address is reset when a capture is started or settings are updated.

=== USB_SETTINGS (2) ===

Send new settings to the device. The settings consist of the following eight bytes sent along with the control request:

{| border="0" style="font-size: smaller;" class="alternategrey sigroktable"
|-
! Byte
! Description
|-
| 0
| Channel to trigger on.
|-
| 1
| Level to trigger on (0 or 1).
|-
| 2
| '''Delay after trigger.'''
|-
| 3
| '''trigger count'''
|-
| 4
| '''Sample rate.'''
|-
| 5
| Number of samples to capture
|-
| 6
| Start capture flag: a capture is started if this is not 0.
|-
| 7
| Always 0.
|}

=== USB_STATUS (3) ===

=== USB_CANCEL (4) ===

== Resources ==

* [https://www.insidegadgets.com/wp-content/uploads/2015/03/Logic_Observer_v1.0_Manual_Rev2.pdf Manual]
* [https://www.insidegadgets.com/wp-content/uploads/2015/03/Logic_Observer_v1.0_Rev2.zip CPLD/MCU source code]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Planned]]

Fluke 8842A

2015-08-07T18:00:26Z

Bert: Created page with "{{Infobox multimeter | image = 180px | name = Fluke 8842A | status = planned | source_code_dir = scpi-dmm | categories..."

{{Infobox multimeter
| image = [[File:Fluke 8842A.png|180px]]
| name = Fluke 8842A
| status = planned
| source_code_dir = scpi-dmm
| categories =
| connectivity = [[IEEE-488]]
| measurements = voltage, current, resistance
| features = 4-wire, autoranging
| website =
}}

The '''Fluke 8842A''' is a bench multimeter with GPIB connectivity.

== Photos ==

<gallery>
File:Fluke 8842A back.png
</gallery>

== Resources ==

* [http://media.fluke.com/documents/8842a___imeng0300.pdf Manual]
* [https://www.youtube.com/watch?v=tY2kfCE6sDM Video review and teardown]

[[Category:Device]]
[[Category:Multimeter]]
[[Category:Planned]]

File:Fluke 8842A back.png

2015-08-07T17:50:12Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

File:Fluke 8842A.png

2015-08-07T17:49:50Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

DER EE DE-5000

2015-07-19T09:36:44Z

Bert: Created page with "{{Infobox multimeter | image = | name = DER EE DE-5000 | status = supported | source_code_dir = deree-de5000 | connectivity = USB | measureme..."

{{Infobox multimeter
| image =
| name = DER EE DE-5000
| status = supported
| source_code_dir = deree-de5000
| connectivity = USB
| measurements = inductance, capacitance, resistance, DCR
| features = ESR
| website = [http://www.deree.com.tw/de-5000.html deree.com]
}}

The '''DER EE DE-5000''' is a handheld LCR meter with USB connectivity.

== Resources ==
* [http://www.deree.com.tw/downloadfiles/28-eng)DE-5000.pdf Datasheet]
* [http://www.eevblog.com/forum/testgear/der-ee-de-5000-unboxing-and-teardown/ Teardown]

[[Category:Device]]
[[Category:LCR meter]]
[[Category:Supported]]

Voltcraft 4080

2015-07-18T18:50:08Z

Bert:

The ''Voltcraft Plus 4080 LCR Meter Dual Display'' comes with an optically coupled serial interface.

== Protocol ==

You can access the device with, for example, ''CuteCom''. The protocol is basically human readable.

The description of the commands you find [http://www.produktinfo.conrad.com/datenblaetter/100000-124999/121064-da-01-en-Schnittstellenbeschr_LCR_4080_Handmessg.pdf at Conrad].

When the device does not respond it might be in setup mode. You can see that in the display. But the software can not. So it might be a good idea to do an initialization with [BXXXXXX] to stop the setup mode. This only works for a setup mode that was requested by an earlier remote session. You can not leave a manual setup mode this way.

Some findings not mentioned in the protocol definition above; without waranty:

=== Disabling keys ===
Sending
A
responds with
REMOTE READY..
and says '''RS232''' in the display

Keys on device are disabled

=== Enabling keys ===
Sending
B
responds with
REMOTE STOP...
Keys on device are enabled

== Images ==

The device complete with rubber bumper and optical/serial cable:

[[File:Voltcraft4080_complete.jpg|400px]]

Screenshot of a short terminal session using CuteCom:

[[File:Voltcraft4080_cutecom.png|400px]]

[[Category:Device]]
[[Category:LCR meter]]
[[Category:Planned]]

Agilent U1732B

2015-07-18T18:49:24Z

Bert:

{{Infobox multimeter
| image = [[File:Agilent U1732B.png|180px]]
| name = Agilent U1732B
| status = planned
| source_code_dir =
| counts = 6000
| categories = CAT III (600V)
| connectivity = [[Device_cables#Agilent_U5481A|USB]]
| measurements = inductance, capacitance, resistance,
| features = phase angle, dissipation factor, quality factor
| website = [http://www.keysight.com/en/pd-1764079-pn-U1732B/handheld-lcr-meters keysight.com]
}}

The '''Agilent U1732B''' is a handheld LCR meter with USB connectivity.

== Photos ==
<gallery>
File:U1732b case.JPG
File:U1732b pcb.JPG
File:U1732b cpu.JPG
File:U1732b adc.JPG
</gallery>

== Resources ==
* [http://literature.cdn.keysight.com/litweb/pdf/5990-3458EN.pdf U1700 series datasheet]

[[Category:Device]]
[[Category:LCR meter]]
[[Category:Planned]]

Agilent U1732B

2015-07-18T18:48:54Z

Bert: Created page with "{{Infobox multimeter | image = 180px | name = Agilent U1732B | status = planned | source_code_dir = | counts..."

{{Infobox multimeter
| image = [[File:Agilent U1732B.png|180px]]
| name = Agilent U1732B
| status = planned
| source_code_dir =
| counts = 6000
| categories = CAT III (600V)
| connectivity = [[Device_cables#Agilent_U5481A|USB]]
| measurements = inductance, capacitance, resistance,
| features = phase angle, dissipation factor, quality factor
| website = [http://www.keysight.com/en/pd-1764079-pn-U1732B/handheld-lcr-meters]
}}

The '''Agilent U1732B''' is a handheld LCR meter with USB connectivity.

== Photos ==
<gallery>
File:U1732b case.JPG
File:U1732b pcb.JPG
File:U1732b cpu.JPG
File:U1732b adc.JPG
</gallery>

== Resources ==
* [http://literature.cdn.keysight.com/litweb/pdf/5990-3458EN.pdf U1700 serues datasheet]

[[Category:Device]]
[[Category:LCR meter]]
[[Category:Planned]]

File:Agilent U1732B.png

2015-07-18T18:48:17Z

Bert: Bert uploaded a new version of "File:Agilent U1732B.png"

== Licensing ==
{{CC-BY-SA-3.0}}

File:Agilent U1732B.png

2015-07-18T18:44:37Z

Bert:

== Licensing ==
{{CC-BY-SA-3.0}}

Device cables

2015-07-18T18:39:48Z

Bert: /* Multimeters */

This page contains information and teardown photos of various multimeter/datalogger/etc. PC connectivity cables and adapters.

= Multimeters =

== Agilent U1173A ==

The [http://www.home.agilent.com/agilent/product.jspx?cc=DE&lc=ger&ckey=792204&nid=-536906710.536910943.00&id=792204&pselect=SR.GENERAL Agilent U1173A] is an IR-USB cable.

'''Hardware''':
* Prolific PL2303HX (max. baudrate 19200, according to the Agilent website)

''' Works with''':
* Agilent U1230/40/50/70 series
* Note: For the U1240 series, the additional [http://www.home.agilent.com/agilent/redirector.jspx?action=ref&lc=ger&cc=DE&nfr=-536906710.536910943&ckey=2101709&cname=PRODUCT U1179A] IR bracket is required.[http://www.home.agilent.com/agilent/product.jspx?cc=DE&lc=ger&nid=-536906710.536910943&pageMode=OV 1]

''' Where to buy''':
* [http://www.home.agilent.com/agilent/product.jspx?cc=DE&lc=ger&ckey=792204&nid=-536906710.536910943.00&id=792204&pselect=SR.GENERAL Agilent] ($31)
* [http://www.newark.com/agilent-technologies/u1173a/ir-to-usb-connectivity-cable-assembly/dp/04M7391 Newark] ($31)
* [http://www.datatec.de/U1173A-Agilent-Adapterkabel.htm Datatec] (€23)

<gallery>
File:Agilent U1173A.jpg|Device, front
File:Agilent U1173A PCB.jpg|PCB, front
File:Agilent U1173A PCB back.jpg|PCB, back
</gallery>

== Agilent U1177A ==

The [http://www.home.agilent.com/agilent/product.jspx?cc=DE&lc=ger&ckey=2090364&nid=-536902461.1006710.00&id=2090364&pselect=SR.GENERAL Agilent U1177A] is an IR-Bluetooth interface module.

Notes: 9600 baud, 8n1 settings on the PC. The protocol (AT commands, documented in the [http://cp.literature.agilent.com/litweb/pdf/U1177-90002.pdf Agilent U1177A configuration guide]) allows changing the baud rate to 19200, among other things.[http://www.home.agilent.com/agilent/redirector.jspx?action=ref&cname=AGILENT_EDITORIAL&ckey=2150265&lc=ger&cc=DE&nfr=-536902461.1006710.00 1] Default Bluetooth PIN: 1234. For the U1240 series, the additional [http://www.home.agilent.com/agilent/redirector.jspx?action=ref&lc=ger&cc=DE&nfr=-536906710.536910943&ckey=2101709&cname=PRODUCT U1179A] IR bracket is required.[http://www.home.agilent.com/agilent/product.jspx?cc=DE&lc=ger&nid=-536906710.536910943&pageMode=OV 2]

'''Hardware''':
* CSR BC417...
* Macronix MX...
* PCB markings: U1177-26500, REV004, MSD-02

''' Works with''':
* Agilent U1230/40/50/70 series

''' Where to buy''': 
It is often given away free as a promotion with one of the Agilent U12xxA meters, but can also be purchased separately:
* [http://www.home.agilent.com/agilent/product.jspx?cc=DE&lc=ger&ckey=2090364&nid=-536902461.1006710.00&id=2090364&pselect=SR.GENERAL Agilent] ($49)
* [http://www.datatec.de/Agilent-1177A-Bluetooth.htm Datatec] (€36)

<gallery>
File:Agilent U1177A.jpg|Device, front
File:Agilent U1177A back.jpg|Device, back
File:Agilent U1177A battery.jpg|Battery compartment
File:Agilent U1177A PCB.jpg|PCB, front
File:Agilent U1177A PCB back.jpg|PCB, back
</gallery>

== Agilent U5481A ==

The [http://www.keysight.com/en/pd-1691186/ir-to-usb-cable Agilent U5481A] is an IR-USB cable.

''' Works with''':
* Agilent U1700B series LCR meters, U1401A calibrator/meter

== Amprobe 38SW-A ==

The [http://www.amprobe.eu/en_GB/showproduct/234/38SW-A/ Amprobe 38SW-A] is an RS232 PC interface cable for the [http://www.amprobe.eu/en_GB/showproduct/134/38XR-A/ Amprobe 38XR-A] multimeter. The "38SW-A" name is also used to refer to the respective PC software for use with the serial cable.

'''Hardware''':
* TODO.

''' Works with''':
* [http://www.amprobe.eu/en_GB/showproduct/134/38XR-A/ Amprobe 38XR-A]

''' Where to buy''':
* [http://www.digikey.com/product-detail/en/38SW-A/38SW-A-ND/1540519 Digikey], [http://www.tme.eu/de/details/38sw-a/messgerate-software/amprobe/38sw/ TME.eu], [http://de.rs-online.com/mobile/p/digital-multimeter/0411722/ RS Components], [http://www.mercateo.com/p/115-911905/38SW_A_Interfacekabel_und_Software.html Mercateo], [http://www.testersandtools.com/Amprobe-38SW-A-RS232-Software-Cable.php testersandtools.com], [http://www.newark.com/amprobe-instruments/38sw-a/rs-232-cable-software-38xr-a/dp/29M6230 Newark], [https://www.distrelec.de/interfacekabel-und-software/amprobe/38sw-a/911905/de Distrelec], and various others.
* The usual price is around €20-€35, depending on vendor and location.

<gallery>
File:Amprobe 38sw a cable package top.jpg|Package, top
File:Amprobe 38sw a cable package bottom.jpg|Package, bottom
File:Amprobe 38sw a cable top.jpg|Cable, top
File:Amprobe 38sw a cable bottom.jpg|Cable, bottom
File:Amprobe 38sw a cable cdrom top.jpg|CD-ROM, top
File:Amprobe 38sw a cable cdrom bottom.jpg|CD-ROM, bottom
File:Amprobe 38sw a cable cdrom contents.jpg|CD-ROM, contents
File:Amprobe 38sw a cable open.jpg|Cable, opened
File:Amprobe 38sw a cable housing1.jpg|Housing 1
File:Amprobe 38sw a cable housing2.jpg|Housing 2
File:Amprobe 38sw a cable pcb top.jpg|PCB, top
File:Amprobe 38sw a cable pcb bottom.jpg|PCB, bottom
File:Amprobe 38sw a cable pcb pinout.jpg|PCB, pinout
</gallery>

== APPA / ISO-TECH IC50 ==

The IC50 is a USB PC interface cable for some APPA and ISO-TECH multimeters and thermometers.

''' Works with''':
* [http://www.appatech.com/appa_product_home.php?pdid=2005102401295373290&kindid=2005081003113623241 APPA 70] series multimeters (and ISO-TECH IDM 70 series clone)
* [http://www.appatech.com/appa_product_home.php?pdid=20051220112048498347&kindid=20050810031145946832 APPA 50] series thermometer (and RS 50 series clone)

''' Where to buy''':
* [http://uk.rs-online.com/web/p/multimeter-accessories/7048135/ RS 704-8135]
* The price is around 40 €

== APPA / ISO-TECH IC70 ==

The IC70 is an RS232 PC interface cable for some APPA and ISO-TECH multimeters and thermometers.

''' Works with''':
* [http://www.appatech.com/appa_product_home.php?pdid=2005102401295373290&kindid=2005081003113623241 APPA 70] series multimeters (and ISO-TECH IDM 70 series clone)
* [http://www.appatech.com/appa_product_home.php?pdid=20051220112048498347&kindid=20050810031145946832 APPA 50] series thermometer (and RS 50 series clone)

''' Where to buy''':
* [http://uk.rs-online.com/web/p/digital-multimeters/4609881/ RS 460-9881]
* The price is around 20 €

<gallery>
File:Ic70 optical serial cable.jpeg|Cable
</gallery>

== Brymen BC-85X(-1) ==

Not compatible with BC-85Xa.

TODO.

'''Hardware''':
* TODO.

''' Works with''':
* Brymen BM857/BM859 (non-a versions)

''' Where to buy''':
* Available from Greenlee as DMSC-9 (not DMSC-9U).
* [http://www.tme.eu/en/details/kitrs232c/meters-software/ TME] (€26.82)

=== Brymen BR85X interface kit ===

<gallery>
File:Brymen_br85x_cable.jpg|Kit contents (software disc not shown)
File:Brymen_br85x_rs232_conn.jpg|BC-85X-1 DB9 connector
File:Brymen_br85x_dmm_end.jpg|BC-85Xa DMM connector
</gallery>

== Brymen BRUA-20X ==

'''Hardware''':
* TODO.

''' Works with''':
* Brymen BM20x and BM25x series

''' Where to buy''':
* [http://www.tme.eu/en/details/kitbrua-20x/meters-software/brymen/ TME] (€30)

<gallery>
File:Brymen brua-20x package1.jpg|Package, top
File:Brymen brua-20x package2.jpg|Package, side
File:Brymen brua-20x package contents.jpg|Package contents
File:Brymen brua-20x bua-2303 front.jpg|BUA-2303, front
File:Brymen brua-20x bua-2303 bottom.jpg|BUA-2303, bottom
File:Brymen brua-20x bc-20x cable.jpg|BC-20X, cable
File:Brymen brua-20x bc-20x attached.jpg|BC-20X, attached
</gallery>

== Brymen BC-85Xa ==

Not compatible with BC-85X.

TODO.

'''Hardware''':
* TODO.

''' Works with''':
* Brymen BM857a/BM859a
* Extech MM570A/MM560A/MP530A/MP510A

''' Where to buy''':
* Available from Extech in a kit with USB-to-serial converter and software disc, under the name SW-810a.
* [http://de.mouser.com/Search/ProductDetail.aspx?qs=zS8Kl81wrHovBIt5EskF9A== Mouser] (€65.99)
* [http://www.tme.eu/de/details/sw810a/umgebungsmesser-sonstige/extech/ TME] (€60.60)

=== Extech SW-810a kit ===

This is a kit sold by Extech, containing the BC-85Xa RS232 cable, the BUA2303 USB-to-serial adapter, a USB cable, and a software disc.

<gallery>
File:Extech_sw810a_kit.jpg|Kit contents (software disc not shown)
File:Extech_sw810a_ir_db9.jpg|BC-85Xa DB9 connector
File:Extech_sw810a_id_dmm_hookup.jpg|BC-85Xa DMM connector
File:Extech_sw810a_usb2serial.jpg|BUA2303 USB-to-serial converter
File:Extech_sw810a_usb2serial_back.jpg|BUA2303 USB-to-serial converter, back
File:Extech_sw810a_usb2serial_bottom.jpg|BUA2303 USB-to-serial converter, bottom
File:Extech_sw810a_IR_opened.jpg|IR side, opened
File:Extech_sw810a_ir_casing.jpg|IR side casing
File:Extech_sw810a_ir_pcb_top.jpg|IR side PCB, top
File:Extech_sw810a_ir_pcb_bottom.jpg|IR side PCB, botoom
File:Extech_sw810a_usb2serial_pcb_top.jpg|BUA2303 PCB, top
File:Extech_sw810a_usb2serial_pcb_bottom.jpg|BUA2303 PCB, bottom
</gallery>

== Brymen BU-86X ==

See [[Brymen BU-86X/Info]] for more details (such as lsusb -v output).

'''Hardware''':
* Cypress CY7C63743 enCoRe USB

''' Works with''':
* Brymen BM867/BM869

''' Where to buy''':
* [http://www.tme.eu/en/details/kitbu-86x/instruments-de-mesure-logiciels/brymen/ TME] (40 €)

=== Brymen BU-86X interface kit ===

<gallery>
File:Bc86x_01_general.jpeg|Kit content (software disc not shown)
File:Bc86x_02_usb.jpeg|BC-86X USB connector
File:Bc86x_03_infrared.jpeg|BC-86X DMM connector
</gallery>

== Digitek DT4000ZC cable ==

The [[Digitek DT4000ZC]] (and the rebadged [[TekPower TP4000ZC]]) ship with this RS232 to 3.5mm stereo plug cable. The ring on the plug is left unconnected.

The cable works on the assumption that TX (pin 3) and DTR (pin 4) are at a fixed voltage and will not be toggled. TX should be below -3 V, and the resistor acts as a pull-down. DTR should be abouve 3V. The photodiode/phototransistor in the DMM will pull the RX pin above 3V when the IR diode is on.

'''Hardware''':
* SMD resistor between TX and RX pins.

''' Works with''':
* [[Digitek DT4000ZC]], [[TekPower TP4000ZC]]

''' Where to buy''':
* The cable ships with the multimeter. It's unclear whether it can be bought standalone (without DMM).

[[Digitek DT4000ZC]] photos:

<gallery>
File:Digitek dt4000zc cable front.jpg|Device, front
File:Digitek dt4000zc cable back.jpg|Device, back
File:Digitek dt4000zc cable open.jpg|Device, open
File:Digitek dt4000zc cable open2.jpg|Device, open 2
File:Digitek dt4000zc cable resistor.jpg|Resistor
</gallery>

[[TekPower TP4000ZC]] photos:

<gallery>
File:Tp4000zc_232_cable.jpg|Supplied RS-232 cable
File:Tp4000zc_232_cable_open.jpg|RS-232 cable, disassembled
File:Tp4000zc_232_cable_detail.jpg|RS-232 cable, detail
</gallery>

== Fluke IR189USB ==

The [http://www.flukeonlinestore.com/2428108.html Fluke IR189USB] is a USB interface cable for Fluke-18x and 28x series DMMs. It is a basic USB-serial cable, based on the [http://www.ftdichip.com/Products/ICs/FT232R.htm FTDI FT232RL] chip.

<gallery>
File:Fluke IR189USB.jpg
File:Fluke IR189USB bottom.jpg
File:Fluke IR189USB PCB top.jpg
File:Fluke IR189USB PCB bottom.jpg
</gallery>

== Fluke OC4USB ==

The [http://www.flukeonlinestore.com/2166266.html Fluke OC4USB] is a USB interface cable for the Fluke 120 series, 190 series scope meter, and the 430 series power quality analyzer.

Resources:
* [http://omapalvelin.homedns.org/fluke/ DIY optical link cable for the Fluke Scopemeter 190 series]

== Fluke PM9080 ==

The [http://www.flukeonlinestore.com/1641983.html Fluke PM9080] is an RS232 interface cable for "digital hard-copy output to serial printer or remote control via a PC".

The max. supported baud rate is 57600.

'''Hardware''':
No active components are on the PCB.

Pinout:
* black: pin 2 (RX)
* brown: pin 3 (TX)
* red: pin 7, 8 (RTS, CTS)
* orange: pin 1, 4, 6 (DCD, DTR, DSR)
* yellow: pin 5 (GND)

''' Works with''':
* Fluke scope meter test tools, power harmonics analyzers, graphical multimeters and multifunction counters.

'''Where to buy''':
* [http://www.flukeonlinestore.com/1641983.html flukeonlinestore.com] ($185.95)
* [http://www.fluke.eu/comx/show_product.aspx?locale=dede&pid=31870 fluke.eu] (€240.-)
* [http://de.farnell.com/fluke/pm9080/pm9080-rs-232-adapter-kabel-optisch/dp/252384 Farnell] (€240.-)
* [http://www.instrumentation2000.com/flukepm9080opticallyisolatedrs-232adaptercable.aspx instrumentation2000.com] ($187.95)
* [http://de.rs-online.com/web/p/interface-adapter/4256752/ RS-Online] (€245.-)
* [http://www.amazon.com/Fluke-PM9080-101-Optically-Isolated/dp/B000LEDHHS Amazon] ($168.23)

'''Resources''':
* [http://omapalvelin.homedns.org/fluke/ DIY optical link cable for the Fluke Scopemeter 190 series]
* [http://www.scopemeter.com/accessories/PM9080.htm PM9080 Optically-isolated RS-232C Interface Adapter] (comparison of the different cable revisions)

<gallery>
File:Fluke PM9080 top.jpg
File:Fluke PM9080 bottom.jpg
File:Fluke PM9080 LEDs.jpg
File:Fluke PM9080 PCB top.jpg
File:Fluke PM9080 PCB bottom.jpg
</gallery>

== Gossen Metrawatt ==
See [[Gossen Metrawatt#Communication Hardware|Gossen Metrawatt]] page.

== GreenLee DMSC-9U ==

TODO.

'''Hardware''':
* TODO.

''' Works with''':
* GreenLee DM-800 series, DML-430A

''' Where to buy''':
* TODO.

== Metex 5-pin RS232 cable ==

This type of 5-pin RS232 cable is used in various Metex (and rebadged) multimeters.

The cable exists in two flavours, an older version with equal pin distance (can be inserted the wrong way) and a newer version with a gap between pins 3 and 4 (fits only one way).

=== Version 1 ===
'''Hardware''':
* No active components.
* 25-pin RS232 connector

''' Works with''':
* [[Voltcraft M-3650CR]], [[PeakTech 4380]], many others.

''' Where to buy''':
* The cable ships with the respective multimeter. It's unclear whether it can be bought standalone (without DMM).

<gallery>
File:PeakTech 4380 cable.jpg|25-pin RS-232 cable
File:PeakTech 4380 cable open.jpg|DB-25F opened, wiring
</gallery>

=== Version 2 ===
'''Hardware''':
* No active components.
* 9-pin RS232 connector

''' Works with''':
* [[MASTECH MAS345]], [[Voltcraft M-3650CR]] (plug with equal pin distances!), [[RadioShack 22-168]], [[Voltcraft M-3650D]], many others.

''' Where to buy''':
* The cable ships with the respective multimeter. It's unclear whether it can be bought standalone (without DMM).

[[MASTECH MAS345]]:
<gallery>
File:Mastech mas345 rs232 cable.jpg|Cable
File:Mastech mas345 rs232 cable connected.jpg|Cable, connected
</gallery>

[[RadioShack 22-168]]:
<gallery>
File:Rs_22_168_cable.jpg|RS-232 cable
File:Rs_22_168_cable_dmm_end.jpg|DMM connector
File:Rs_22_168_cable_dmm_end_exposed.jpg|DMM connector, protective sheath removed
File:Rs_22_168_cable_internals.jpg|DB9 connector, opened
File:Rs_22_168_cable_connection.jpg|DB9 connections
</gallery>

'''DIY:'''
<gallery>
File:MetexDIY.JPG|DIY adapter
File:MetexAnschluss.JPG|Pin numbers (Metex DMM)
</gallery>

=== Cable pinout ===
{| border="0" style="font-size: smaller;" class="alternategrey sigroktable"
!Metex-connector pin (male)
!RS-232 25-pin female
!RS-232 DE9-female pin
!Signal (computer side)
!Remarks
|-
| 1 || 7 || 5 || GND ||
|-
| 2 || 2 || 3 || TX ||
|-
| 3 || 4 || 7 || RTS || Used to power receiver in multimeter, must be OFF.
|-
| 4 ||20 || 4 || DTR || Used to power receiver in multimeter, must be ON.
|-
| 5 || 3 || 2 || RX ||
|}

== UNI-T UT-D02 ==

The [http://www.uni-trend.com/en/product/2014_0626_553.html UNI-T UT-D02] is an RS232 cable for various UNI-T multimeters (and rebranded models) with PC connectivity.

'''Hardware''':
* TODO.

''' Works with''':
* UNI-T UT61D/...
* Voltcraft VC820/VC840/...

''' Where to buy''':
* [https://secure.reichelt.de/Multimeter-digital/UT-D01/3/index.html?;ACTION=3;LA=2;ARTICLE=100496;GROUPID=4058;artnr=UT+D01 Reichelt] (€15.95)
* [http://www.conrad.de/ce/de/product/125640/VOLTCRAFT-RS-232-SCHNITTSTELLENADAPTER/SHOP_AREA_17626&promotionareaSearchDetail=005 Conrad/Voltcraft] (€9.95)
* [http://www.pinsonne-elektronik.de/pi10/pd82.html Pinnesonne] (€5.00)
* [http://www.ebay.de/itm/UNI-T-UT-D02-RS232-Data-Cable-/360492337424 eBay, various sellers] (€7.99)

<gallery>
File:Voltcraft dmm rs232 cable.jpg|Cable
File:Voltcraft dmm rs232 cable ir.jpg|Cable, IR
File:Voltcraft dmm rs232 cable open.jpg|Cable, open
File:Voltcraft dmm rs232 cable pcb front.jpg|PCB, front
File:Voltcraft dmm rs232 cable pcb back.jpg|PCB, back
</gallery>

== UNI-T UT-D04 ==

The [http://www.uni-trend.com/UT-D04.html UNI-T UT-D04] (see also [http://www.uni-trend.com.cn/cp-show.asp?yy=%D6%D0%CE%C4&ProductNO=386 uni-trend.com.cn]) is a USB/HID cable for various UNI-T multimeters (and rebranded models) with PC connectivity.

There have been (at least) two versions of this cable, the older one with Hoitek HE2325U USB/HID chip, the newer one using a WCH CH9325 USB/HID chip.

See [[Device cables/Info#UNI-T_UT-D04]] for more details (such as '''lsusb -v''' output) about the cable.

'''Hardware (old version)''':
* Hoitek HE2325U

'''Hardware (new version)''':
* [[WCH CH9325]]

'''Works with''':
* [[UNI-T UT61B]] / [[UNI-T UT61C|UT61C]] / [[UNI-T UT61D|UT61D]] / [[UNI-T UT61E|UT61E]], various other UNI-T DMMs
* [[Voltcraft VC-820]] / [[Voltcraft VC-830|VC-830]] / [[Voltcraft VC-840|VC-840]], various other Voltcraft rebadges of UNI-T DMMs
* [[Tenma 72-7745]] and various other Tenma/Farnell rebadges of UNI-T DMMs

'''Where to buy''':
* [https://secure.reichelt.de/Multimeter-digital/UT-D04/3/index.html?;ACTION=3;LA=2;ARTICLE=97153;GROUPID=4058;artnr=UT+D04 Reichelt] (€9.95)
* [http://www.conrad.de/ce/de/product/120317/Voltcraft-USB-SCHNITTSTELLENADPTER/SHOP_AREA_17626&promotionareaSearchDetail=005 Conrad/Voltcraft] (€25.95)
* [http://www.pinsonne-elektronik.de/pi10/pd78.html Pinnesonne] (€8.90)
* [http://www.ebay.de/itm/UT-D04-USB-INFRARED-INTERFACE-CABLE-FOR-UT71-and-UT81-/180687967854 eBay, various sellers] (€12.37)

<gallery>
File:Uni-t ut61d cable.jpg|Cable
File:Uni-t ut61d cable ir.jpg|Cable, IR
File:Uni-t ut61d usb cable attached.jpg|Attached cable
File:Uni-t ut61d cable open1.jpg|Opened 1
File:Uni-t ut61d cable open2.jpg|Opened 2
File:Uni-t ut61d cable pcb front.jpg|PCB, front
File:Uni-t ut61d cable pcb back.jpg|PCB, back
</gallery>

other cable, but only with different silkscreen (another batch?)

<gallery>
File:UT81-USB_cable.jpg|Cable
File:UT81-USB_cable_led.jpg|Cable, IR
File:UT81-USB_cable_opened.jpg|Opened
File:UT81-USB_cable_front.jpg|PCB, front
File:UT81-USB_cable_back.jpg|PCB, back
</gallery>

Voltcraft sells rebranded, UNI-T made DMMs, and also ships with the same USB/HID cable, but with a Voltcraft logo/marking on it. It is likely that Voltcraft also shipped both the old and new version of the cable at some point.

<gallery>
File:Voltcraft ut-d04 cable.jpg|Voltcraft cable
File:Voltcraft ut-d04 ir.jpg|Voltcraft cable, IR
</gallery>

== V&A VA4000 ==

The [http://www.mastech.com.cn/html/en/products-accessories.htm V&A VA4000] is a USB PC interface cable for various V&A multimeters.

It seems there have been at least two different revisions of the cable. The older one used a Sunplus SPCP825 USB-to-serial chip (see [http://www.mikrocontroller.net/topic/160215#2032176 here], [http://multimeter.schewe.com/ here], or also check the drivers from [http://www.elv.de/digital-multimeter-va18b-mit-pc-link.html here]), the newer revisions use a Prolific PL2303HX chip.

See [[Device cables/Info#V.26A_VA4000]] for more details (such as '''lsusb -v''' output) about the cable.

'''Hardware''' (old cable version):

* '''USB to serial chip''': Sunplus SPCP825
* '''Crystal''': ?

'''Hardware''' (new cable version):

* '''USB to serial chip''': Prolific PL2303HX YR0903A
* '''Crystal''': 12MHz

''' Works with''':
* V&A VA18B, V&A VA-38

''' Where to buy''':
* [http://www.komerci.de/shop/product_info.php?products_id=427&cPath=26_42&osCsid=0c0a8cf5d72cd931528b26aeb5af7ce5 Komerci] (€6.50)

Old cable with Sunplus SPCP825 chip from a [[V&A VA18B]]:

<gallery>
File:Va va4000 cable sunplus ic 0405.jpg|USB cable
File:Va va4000 cable sunplus ic 0407.jpg|Cable, dismantled
File:Va va4000 cable sunplus ic 0408.jpg|PCB, top
File:Va va4000 cable sunplus ic 0414.jpg|PCB, bottom
</gallery>

New cable with Prolific PL2303HX from a [[V&A VA18B]]:

<gallery>
File:Mastech va18b usb cable.jpg|USB cable
File:Mastech va18b usb cable pcb front.jpg|USB cable PCB, front
File:Mastech va18b usb cable pcb back.jpg|USB cable PCB, back
</gallery>

Another cable shipped with a [[V&A VA40B]] (it has the same Prolific PL2303HX PCB as the V&A 18B above, but seem to have a thinner mechanical plug):

<gallery>
File:VA40B USB cable.JPG|USB cable
VA40B_USB_cable_connector.JPG|USB cable, optical connector
</gallery>

== V&A VA4001 ==

The [http://www.mastech.com.cn/html/en/products-accessories.htm V&A VA4001] is an RS232 PC interface cable for various V&A multimeters.

TODO.

== Victor 86C USB cable ==

The [[Victor 86C]] PC interface cable (doesn't seem to have a specific name or part number) contains a USB/HID chip.

'''Hardware''':

* '''USB/HID chip''': [[Victor_protocol#USB_interface_chip|Unmarked SO-20 chip]]

''' Works with''':
* Victor 86C. Maybe other Victor models(?)

''' Where to buy''':
* The cable ships with the Victor 86C. It's unclear whether it can be bought standalone (without DMM).

<gallery>
File:Victor 86c usb cable.jpg|USB cable
File:Victor 86c usb cable open.jpg|USB cable, open
File:Victor 86c usb cable pcb top.jpg|USB cable PCB, front
File:Victor 86c usb cable pcb bottom.jpg|USB cable PCB, back
</gallery>

More information about the USB chip and the protocol it uses to communicate with the PC can be found on the [[Victor protocol]] page.

= Sound level meters =

== Colead SL-5868P cables ==

Some distributors sell the [[Colead SL-5868P]] sound level meter with a set of two cables: one 3.5mm jack to female DB9, and one male DB9 to USB, which has a Prolific PL-2303 chip in the DB9. This cable does not work; the device's serial port needs a 2.5mm jack.

<gallery>
File:Colead SL5868P cables.jpg|A really bad idea
File:Colead SL5868P cable USB top.jpg|DB9 to USB, top
File:Colead SL5868P cable USB bottom.jpg|DB9 to USB, bottom
File:Colead SL5868P cable serial top.jpg|3.5mm jack to DB9, top
File:Colead SL5868P cable serial bottom.jpg|3.5mm jack to DB9, bottom
</gallery>

The SL-5868P is also available with bluetooth connectivity instead of serial.

== Tondaj SL-814 cable ==

The [[Tondaj SL-814]] sound level meter ships with this USB PC interface cable.

'''Hardware''':
* '''USB to serial chip''': Prolific PL2303HX LFC10073A
* '''Crystal''': 12MHz

''' Works with''':
* [[Tondaj SL-814]] (maybe other Tondaj gear?)

''' Where to buy''':
* The cable ships with the [[Tondaj SL-814]]. It's unclear whether it can be bought standalone (without the sound level meter).

<gallery>
File:Tondaj sl814 cable.jpg|Cable
File:Tondaj sl814 cable connector.jpg|Cable, connector
File:Tondaj sl814 cable open1.jpg|Cable, open
File:Tondaj sl814 cable open2.jpg|Cable, open 2
File:Tondaj sl814 cable pcb top.jpg|PCB, top
File:Tondaj sl814 cable pcb bottom.jpg|PCB, bottom
</gallery>

= Programmable electronic loads =

== M133 ==

The '''M133''' (vendor unknown) cable ships with the [[ATTEN ATZ9711]] programmable electronic load. It's unclear whether this is a custom cable for this device, or a generic RS232 isolator cable.

The 28-pin chip is a standard Prolific PL-2303HX serial-USB chip.

The other chip is presumably an optocoupler, but the vendor/model is unknown.

<gallery>
File:M133 isolated serial-USB cable.jpg
File:M133 isolated serial-USB cable back.jpg
File:M133 isolated serial-USB cable PCB top.jpg
File:M133 isolated serial-USB cable PCB bottom.jpg
File:M133 isolated serial-USB cable chip.jpg
</gallery>

= See also =

* [[Multimeter ICs]]
* [[Serial port]]

Philips PM2800 series

2015-06-21T16:30:17Z

Bert:

{{Infobox power supply
| image = [[File:Philips PM2813.png|180px]]
| name = Philips PM2800 series
| status = supported
| source_code_dir = scpi-pps
| channels = 1-3
| connectivity = GPIB
| features =
| website = [http://en-us.fluke.com/products/all-accessories/fluke-pm2800.html fluke.com]
}}

The '''Philips PM2800''' are a series of programmable power supplies with 1-3 output channels and GPIB connectivity. Each channel contains 1 of 6 available modules:

{| border="0" style="width: 25em;" class="alternategrey sigroktable sortable"
|-
! style="width: 5em; text-align: left;" | Voltage
! style="width: 4em; text-align: left;" | Current
! style="width: 4em; text-align: left;" | Power
! style="width: 10em; text-align: left;" | Type
|-
| 30V || 10A || 60W || autoranging
|-
| 60V || 5A || 60W || autoranging
|-
| 60V || 10A || 120W || autoranging
|-
| 8V || ±15A || 120W || linear
|-
| 60V || ±2A || 120W || linear
|-
| 120V || ±1A || 120W || linear
|}

The autoranging modules go in chassis models 2811/2812/2813 (last digit is number of modules), linear in models 2831/2832.

These power supplies have also been sold under the Fluke brand.

== Photos ==
<gallery>
File:Philips PM2813 back.jpg|Back of PM2813/111
File:Philips PM2813 control.jpg|PM2813/111 control board
</gallery>

== Resources ==

* [http://assets.fluke.com/datasheets/pm2800.pdf Series overview]
* [http://media.fluke.com/documents/pm2800xxumeng0300.pdf Users manual]
* [http://media.fluke.com/documents/pm2800xxrmeng0300.pdf Software reference manual]
* [https://www.youtube.com/watch?v=UI0aVEko7ic EEVBlog video on the PM2812]

[[Category:Device]]
[[Category:Power supply]]
[[Category:Supported]]