sigrok - User contributions [en]

Getting started with a multimeter

2016-01-21T14:27:23Z

Adicarlo: lets put *something* here to help the poor users.... just a stub

For basic DMM readings, use [[Sigrok-cli]] or [[Sigrok-meter]].

== Examples ==

Continuous readings using a [[MAS345]]:
sigrok-cli --driver mastech-mas345:conn=/dev/ttyUSB0 --continuous

MASTECH MAS345

2016-01-20T05:36:19Z

Adicarlo: details on the driver to use, which is probably helpful to the user

{{Infobox multimeter
| image = [[File:Mastech_mas345_device_front.png|180px]]
| name = MASTECH MAS345
| status = supported
| source_code_dir = serial-dmm
| counts = 4000
| categories = CAT II
| connectivity = [[Device_cables#Metex_5-pin_RS232_cable|RS232]]
| measurements = voltage, current, resistance, capacitance, temperature, hFE, diode, continuity
| features = autorange, data hold, bargraph, backlight
| website = [http://web.archive.org/web/20080305031323/http://www.p-mastech.com/products/04_dm/mas345.html p-mastech.com]
}}

The '''MASTECH MAS345''' is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.

It is also sold under the names [http://www.circuitspecialists.com/csi345.html Circuit Specialists CSI345]1, [http://web.archive.org/web/20070224223043/http://www.globalspecialties.com/pro70.html Global Specialties Pro-70], [http://www.xlsmess.de/html/mcvoice_-_m-345pro.html McVoice M-345pro], [http://www.sinometer.com/jpg/MAS345.jpg Sinometer MAS345]. and [http://www.velleman.eu/products/view/?country=ot&lang=de&id=341708 Velleman DVM345DI].


1 The [http://www.circuitspecialists.com/products/csi345.zip software shipped by Circuit Specialists] is MasView 1.1.


== Hardware ==

'''Multimeter''':

* '''Main chip''': MASTECH Japan M343-01 F0951D174 (80 pins, 16 + 16 + 24 + 24)
* '''14-stage binary counter/oscillator''': [http://www.st.com/internet/analog/product/69763.jsp ST 74HC4060] ([http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00000318.pdf datasheet]) (marking: "ST 74HC4060 N00U732")
* '''Precision perational amplifier''': [http://www.ti.com/product/op07c Texas Instruments OP07C] ([http://www.ti.com/lit/gpn/op07c datasheet]) (marking: "12AL9JM 0P07CP")
* '''CMOS multifunctional time base circuit''': [http://translate.google.com/translate?sl=zh-CN&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fproduct.ch.gongchang.com%2Fd16189061.html&act=url Green Sea Technology GC7555AP] ([http://www.chinaeds.com/zl/201041695739344804_GC7555AD,GC7555APpdf.pdf datasheet], [https://translate.googleusercontent.com/translate_c?act=url&hl=de&ie=UTF8&prev=_t&rurl=translate.google.com&sl=zh-CN&tl=en&u=http://www.chinaeds.com/d.aspx%3Fid%3D298797&usg=ALkJrhh8MzVMH7GdvsM85Mvt0pR1rHF_-w English translation]) (marking: "GC7555AP AA7057HS")
** This is an NE555 compatible chip, apparently.
* '''General-purpose photocoupler''': [http://www.sharpsma.com/optoelectronics/isolation-devices/dc-input-photocouplers/PC817X2J000F Sharp PC817] ([http://www.sharpsma.com/webfm_send/1092 datasheet]) (marking: "B > B5 PC817 Sharp")
** "B": model = PC817X2J000F/PC817XF2J00F, ">": China factory, "B5": date code == May 1991
* '''General-purpose photocoupler''': [http://www.sharpsma.com/optoelectronics/isolation-devices/dc-input-photocouplers/PC817X2J000F Sharp PC817] ([http://www.sharpsma.com/webfm_send/1092 datasheet]) (marking: "B > B6 PC817 Sharp")
** "B": model = PC817X2J000F/PC817XF2J00F, ">": China factory, "B6": date code == June 1991
* '''Crystal''': ca. 32kHz
* '''Fuse''': 15A/250V (6x30mm) (for the 10A jack; interestingly the PCB silkscreen says "20A" for that jack)

'''RS232 cable''':

* See [[Device_cables#Metex_5-pin_RS232_cable]].

== Driver ==

Uses the driver '''mastech-mas345'''. You'll generally need the 'conn' driver option to specify the serial device to use.

Example:

sigrok-cli --driver mastech-mas345:conn=/dev/ttyUSB0 --samples 10
== Photos ==

'''Multimeter''':

<gallery>
File:Mastech mas345 package1.jpg|Outer package
File:Mastech mas345 package2.jpg|Package
File:Mastech mas345 package3.jpg|Package, open
File:Mastech mas345 package contents.jpg|Package contents
File:Mastech mas345 device front rubber.jpg|Device, rubber holster
File:Mastech mas345 device front.jpg|Device, front
File:Mastech mas345 device back.jpg|Device, back
File:Mastech_mas345_probes.jpg|Probes
File:Mastech mas345 temperature sensor.jpg|Temperature probe
File:Mastech mas345 lcd1.jpg|LCD
File:Mastech mas345 lcd2.jpg|LCD w/ backlight
File:Mastech mas345 device open.jpg|Device, open
File:Mastech mas345 device plastic.jpg|Front cover
File:Mastech mas345 pcb front1.jpg|PCB, front
File:Mastech mas345 pcb front displayremoved.jpg|PCB, front, w/o LCD
File:Mastech mas345 pcb front2.jpg|PCB, front top
File:Mastech mas345 pcb front3.jpg|PCB, front middle
File:Mastech mas345 pcb front4.jpg|PCB, front bottom
File:Mastech mas345 pcb bottom1.jpg|PCB, back 1
File:Mastech mas345 pcb bottom2.jpg|PCB, back 2
File:Mastech mas345 display1.jpg|LCD 1
File:Mastech mas345 display2.jpg|LCD 2
File:Mastech mas345 pcb rs232 connector.jpg|RS232 connector
File:Mastech mas345 mastech m343-01.jpg|MASTECH M343-01
File:Mastech mas345 gc7555ap.jpg|GC7555AP
File:Mastech mas345 sharp pc817.jpg|Sharp PC817
File:Mastech mas345 st 74hc4060.jpg|ST 74HC4060
File:Mastech mas345 texas instruments 12al9jm.jpg|TI OP07C
</gallery>

'''RS232 cable''':

See [[Device_cables#Metex_5-pin_RS232_cable]].

== Protocol ==

The protocol is (partially) documented in the vendor software's "Help" window (seems to apply to MAS343, MAS344, and MAS345; the M9803R protocol is different).

See [[Multimeter_ICs#Metex_14-byte_ASCII]] for the DMM IC protocol.

== Resources ==

* [http://web.archive.org/web/20080305031323/http://www.p-mastech.com/products/04_dm/mas345_hys004695.pdf Original English vendor manual] (2008)
* [http://www.elv.de/controller.aspx?cid=683&detail=10&detail2=211397 elv.de: Download zu: Digital-Multimeter MAS-345 (68-04 59 88)]:
** [http://www.elv-downloads.de/service/manuals_hw/45988_MAS345_UM.pdf German manual from ELV] (2002)
** [http://www.elv-downloads.de/service/manuals_hw/45988_MAS345_Software_V20.zip "DMM VIEW" software, version 2.0] (for Win98/NT/ME/2000/XP; supports MAS343, MAS344, MAS345, M9803R)
* [http://www.cczwei-forum.de/cc2/thread.php?threadid=3452 cczwei-forum.de: C# software for reading DMM values]
* [http://www.linux-magazin.de/Heft-Abo/Ausgaben/2007/08/E-Werke?category=0 Linux Magazin: E-Werke: Perl misst Stromverbrauch mit Multimeter]
* [https://savannah.nongnu.org/projects/marsh mas-345/marsh: multimeter read and store]
* [http://libesz.digitaltrip.hu/mas-345/ digitaltrip.hu: Mastech MAS-345 digital multimeter Windows GUI] ([https://github.com/libesz/MAS345_GUI github])
* [https://github.com/mschilli/device-mas345-perl github: device-mas345-perl]
* [http://www.b-redemann.de/sp-DMM-auslesen.shtml b-redemann.de Auslesen von Messgeräten mit RS232 Interface über USB]
* [http://freecode.com/projects/tmon tmon] (uses a MASTECH MAS345)

[[Category:Device]]
[[Category:Multimeter]]
[[Category:Supported]]

Saleae Logic8/Info

2015-12-03T17:18:35Z

Adicarlo: prefix with at least one space

== lsusb ==

=== from power up ===

After power-cycling, but before loading Saleae's vendor-supplied firmware:

$ '''lsusb -v'''
Bus 001 Device 007: ID '''21a9:1004'''
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 '''Vendor Specific Class'''
bDeviceSubClass 255 '''Vendor Specific Subclass'''
bDeviceProtocol 255 '''Vendor Specific Protocol'''
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)


=== with vendor firmware ===

Upon connecting to the device with the vendor-supplied Logic (beta 1.2.5),


$ '''lsusb -v'''
Bus 001 Device 022: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 1 Saleae LLC
iProduct 2 Logic S/16
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled

Saleae Logic8/Info

2015-12-03T17:17:00Z

Adicarlo:

Fx2lafw

2015-12-03T16:51:10Z

Adicarlo: fill in for saleae logic 8

{{DISPLAYTITLE:fx2lafw}}
'''fx2lafw''' is an open-source firmware for Cypress FX2 chips which makes them usable as simple logic analyzer hardware.

It is licensed under the terms of the '''GNU GPL (version 2, or later)''' and written in C, using [http://sdcc.sourceforge.net/ sdcc] as compiler, and [https://github.com/mulicheng/fx2lib fx2lib] as helper library.

== Hardware overview ==

The fx2lafw firmware is meant to work on any FX2-based hardware, including logic analyzers, FX2 eval boards, or other hardware which has this chip on-board.

Here's a quick overview of some of the relevant hardware information we have about the various devices.

The devices marked as '''Clone''' are those that clone the USB VID/PID of the original product, and also have no own PC software/firmware, but instead illegally ship the software of the original product/manufacturer.

{| border="0" style="font-size: smaller" class="alternategrey sortable sigroktable"
|-
!Device
!USB VID:PID
!Product type
!Probes (pins)
!FX2 package
!Buffer / ESD-protection
!Resistors
!I2C EEPROM
!Status

|-
| [http://translate.google.com/translate?sl=ru&tl=en&u=http%3A%2F%2Fwww.6-lab.com%2Fen%2Flogic-u.html 6-Lab LOGIC-U]5
| ?
| Clone (Logic)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [http://translate.google.com/translate?sl=ru&tl=en&u=http://www.6-lab.com/en/logic-u-plus.html 6-Lab LOGIC-U PLUS]5
| ?
| Clone (AX-Pro)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 95%1

|-
| [http://translate.google.com/translate?sl=ru&tl=en&u=http%3A%2F%2F6-lab.com%2Fen%2Flogicupro.html 6-Lab LOGIC-U PRO]5
| ?
| Clone (AX-Pro)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 95%1

|-
| [http://translate.google.com/translate?sl=ru&tl=en&u=http%3A%2F%2F6-lab.com%2Fen%2Flogicuisl.html 6-Lab LOGIC-U ISL]5
| ?
| Clone (Logic)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [[ARMFLY AX-Pro]]
| 08a9:0014
| Clone (AX-Pro)
| 8 (+1 analog)
| 56LTXC (QFN)
| ?
| 100 Ω
| Atmel ATML920 24C02N SU27 D
| bgcolor="lime" | 95%1

|-
| [[ARMFLY Mini-Logic]]2
| 08a9:0014
| Clone (AX-Pro w/o scope)
| 8
| 56LTXC (QFN)
| ?
| 100 Ω
| Atmel ATML920 24C02N SU27 D
| bgcolor="lime" | 100%

|-
| [[Braintechnology USB Interface V2.x]]
| 04b4:8613
| bgcolor="lime" | Eval board
| 8/16
| 56PVXC (SSOP)
| none
| none
| Microchip 24LC64I
| bgcolor="lime" | 100%

|-
| [[Braintechnology USB-LPS]]
| 16d0:0498
| bgcolor="lime" | Original product
| 8/16
| 56PVXC (SSOP)
| none
| ? 68 Ω
| Atmel ATML0816 TINY13 20SU
| bgcolor="lime" | 100%

|-
| [[CWAV BusBee]]
| ?
| bgcolor="lime" | Original product
| 4
| ?
| ?
| ?
| ?
| bgcolor="red" | TODO

|-
| [[CWAV USBee AX-Standard]]
| [http://www.mikrocontroller.net/topic/136039#1878129 08a9:0012]
| bgcolor="lime" | Original product
| ?
| ?
| ?
| ?
| ?
| bgcolor="red" | TODO

|-
| [[CWAV USBee AX-Plus]]
| [http://www.mikrocontroller.net/topic/136039#1878129 08a9:0013]
| bgcolor="lime" | Original product
| ?
| ?
| ?
| ?
| ?
| bgcolor="red" | TODO

|-
| [[CWAV USBee AX-Pro]]
| [http://www.mikrocontroller.net/topic/136039#1878129 08a9:0014]
| bgcolor="lime" | Original product
| 8 (+1 analog)
| ?
| ?
| ?
| ?
| bgcolor="lime" | 95%1

|-
| [[CWAV USBee DX]]
| [http://www.mikrocontroller.net/topic/136039#1878129 08a9:0015]
| bgcolor="lime" | Original product
| 16 (+2 analog)
| ?
| ?
| ?
| ?
| bgcolor="red" | TODO

|-
| [[CWAV USBee EX2]]
| ?
| bgcolor="lime" | Original product
| 8
| ?
| ?
| ?
| ?
| bgcolor="red" | TODO

|-
| [[CWAV USBee SX]]
| 08a9:0009
| bgcolor="lime" | Original product
| 8
| 56PVXC (SSOP)
| none
| 560 Ω
| Microchip 24LC01B
| bgcolor="lime" | 100%

|-
| [[CWAV USBee ZX]]
| 08a9:0005
| bgcolor="lime" | Original product
| 8
| 56PVXC (SSOP)
| none
| ?
| ?
| bgcolor="red" | TODO

|-
| [[EE Electronics ESLA100]]
| 0925:3881
| Clone (Logic)
| 8
| 56LFXC (QFN)
| NXP 74HC245D
| 100 Ω
| Atmel ATMLH911 02B 1
| bgcolor="lime" | 100%

|-
| [[EE Electronics ESLA201A]]
| 08a9:0014
| Clone (AX)
| 8 (+1 analog)
| 56LFXC (QFN)
| none
| 100 Ω
| Atmel ATMLH113
| bgcolor="lime" | 95%1

|-
| [http://iteadstudio.com/store/index.php?main_page=product_info&cPath=2&products_id=221 ITead Studio MiniLogic]4
| ?
| Clone (Logic, AX w/o scope)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [http://iteadstudio.com/store/index.php?main_page=product_info&cPath=1&products_id=51 ITead Studio ITDB01]
| ?
| bgcolor="lime" | Eval board
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [[Lcsoft Mini Board]]
| 04b4:8613 / 0925:3881
| Eval board / Clone (Logic)
| 8/16
| 56PVXC (SSOP)
| none
| none
| Shenzhen First-Rank Technology T24C128A
| bgcolor="lime" | 100%

|-
| [[MCU123 Saleae Logic clone]]
| 0925:3881
| Clone (Logic)
| 8
| 56PVC (SSOP)
| NXP 74HC245
| 100 Ω
| Atmel AT24C02
| bgcolor="lime" | 100%

|-
| [[MCU123 USBee AX Pro clone]]2
| 08a9:0014
| Clone (AX-Pro w/o scope)
| 8
| 56PVXC (SSOP)
| NXP 74HC245
| 100 Ω
| Atmel AT24C02
| bgcolor="lime" | 100%

|-
| [http://www.ebay.co.uk/itm/MDSO-LA-20MHz-USB-Digital-oscilloscope-48M-Sampling-16-channel-logic-analyzer-/251119761248?pt=UK_BOI_Electrical_Test_Measurement_Equipment_ET&hash=item3a77e77760&_uhb=1 MDSO-LA]
| ?
| Clone (SX, AX-Pro)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [http://translate.google.com/translate?sl=ru&tl=en&js=n&prev=_t&hl=de&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwww.rom.by%2Fforum%2FLogicheskij_analizator_signalov_USBee_AX_Saleae_Logic_45&act=url Mollex Logic Analyzer]3
| ?
| Clone (Logic, AX w/o scope)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [http://translate.google.com/translate?hl=de&sl=zh-CN&tl=en&u=http%3A%2F%2Fitem.taobao.com%2Fitem.htm%3Fid%3D6076642324 Noname Saleae Logic clone I]
| ?
| Clone (Logic)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [http://translate.google.com/translate?sl=cs&tl=en&js=n&prev=_t&ie=UTF-8&eotf=1&u=http%3A%2F%2Fpandatron.cz%2F%3F2729%26klon_logickeho_analyzatoru_saleae&act=url Pandatron PLA8] ([https://translate.googleusercontent.com/translate_c?act=url&depth=1&hl=de&ie=UTF8&prev=_t&rurl=translate.google.com&sl=cs&tl=en&u=http://pandatron.cz/%3Fshop%26sla%3D2%26pn%3D90113%26tx%3Dpla8_modul_-_logicky_analyzator_pro_usb&usg=ALkJrhjOD7bJQd1xRz_BFS3hxg31kE7FSQ S], [http://www.ebay.de/itm/USB-Logic-Analyzer-and-decoder-8-CH-10-GS-CY7C68013A-USB-2-0-/221154315071 E])
| ?
| Clone (Logic)
| 8
| 56PVXC (SSOP)
| SN74LVC245APWR
| 100 Ω
| ?
| bgcolor="lime" | 100%

|-
| [http://translate.google.com/translate?sl=ru&tl=en&u=http%3A%2F%2Fpicavr.kr1.ru%2FUSBAnalyzer%2FDigital_USB_Analyzer_v1.html picavr Digital USB Analyzer v1]
| ?
| Clone (Logic, AX w/o scope)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [http://translate.google.com/translate?sl=ru&tl=en&u=http%3A%2F%2Fpicavr.kr1.ru%2FUSBAnalyzer%2FAD_USB_Analyzer_v2.html picavr A/D USB Analyzer v2]
| ?
| Clone (Logic, AX)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 95%1

|-
| [http://translate.google.com/translate?sl=ru&tl=en&u=http%3A%2F%2Fpicavr.kr1.ru%2FUSBAnalyzer%2FAD_USB_Analyzer_v3.html picavr A/D USB Analyzer v3]
| ?
| Clone (Logic, AX)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 95%1

|-
| [http://translate.google.com/translate?sl=ru&tl=en&u=http%3A%2F%2Fpicavr.kr1.ru%2FUSBAnalyzer%2FAD_USB_Analyzer_v4.html picavr A/D USB Analyzer v4]
| ?
| Clone (Logic, AX)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 95%1

|-
| [http://lab.robomotic.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=22&category_id=6&vmcchk=1&option=com_virtuemart&Itemid=56 Robomotic BugLogic 2]
| ?
| Clone (Logic, SX/ZX)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [[Robomotic BugLogic 3]]
| 0925:3881
| Clone (Logic)
| 8
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [[Robomotic MiniLogic]]
| 0925:3881
| Clone (Logic, AX w/o scope)
| 8
| 56PVXC (SSOP)
| 74HC244A
| ?
| 2x Microchip 24LC02BI, 1x 24LC64I
| bgcolor="lime" | 100%

|-
| [http://lab.robomotic.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=26&category_id=6&vmcchk=1&option=com_virtuemart&Itemid=56 Robomotic XZL024]7
| 08a9:0014
| Clone (AX-Pro)
| 8 (+2 analog)
| 56LTXC (QFN)
| ?
| 100 Ω
| Atmel 24C02N
| bgcolor="lime" | 95%1

|-
| [[Saleae Logic]]
| 0925:3881
| bgcolor="lime" | Original product
| 8
| 56PVXC (SSOP)
| ST DVIULC6-4SC6
| ?
| ?
| bgcolor="lime" | 100%

|-
| [[Saleae Logic8]]
| 21a9:1004
| bgcolor="lime" | Original product
| 8 (+8 analog)
| 56LTXC
| ?
| ?
| ?
| bgcolor="red" | TODO

|-
| [http://www.wholesale-in-china.org/articles/article-194265.htm Sysclk Box]
| ?
| Clone (SX, AX-Pro w/o scope)
| ?
| ?
| ?
| ?
| ?
| bgcolor="lime" | 100%

|-
| [[XZL_Studio AX]]
| 08a9:0014
| Clone (AX-Pro)
| 8 (+2 analog)
| 56LTXC (QFN)
| ?
| 100 Ω
| Atmel 24C02N
| bgcolor="lime" | 95%1

|-
| [[XZL Studio DX]]6
| 2x 08a9:0015
| Clone (DX)
| 8/16
| 56PVXC (SSOP)
| ?
| ?
| Atmel ATML H136 24C02C M Y
| bgcolor="red" | TODO

|}

All devices use a 24MHz crystal. For 8 probes the FX2 pins PB0-PB7 are used, for 16 probes PB0-PB7 and PD0-PD7. For analog support PD0-PD7 (plus additional hardware) is usually used.


1 Analog signal support is not yet implemented. 
2 Even though this device has the same USB VID/PID as the CWAV USBee AX-Pro, it only has 8 channels and no analog support. 
3 Clone of the USBee AX and Saleae Logic. "Mollex" is the name of the guy who seems to sell it on some forum. 
4 Clone of the USBee AX (SX?) and Saleae Logic, see also [http://iteadstudio.com/copied/hack-a-saleae-logic-analyzer/ here] and [http://iteadstudio.com/produce/seleae-logic-usbee-ax-usb-blaster/ here]. Dissection by a user [http://www.todopic.com.ar/foros/index.php?topic=32657.0 here]. Seems to be the same hardware as the [[Robomotic MiniLogic]]. 
5 It seems 6-Labs [http://electronicsjunk.com/index.php?option=com_content&view=article&id=52:saleae-logic-analyzer-&catid=34:electronics&Itemid=59 has/had permission from Saleae] to distribute the hardware in Ukraine (only)? [http://translate.google.com/translate?sl=ru&tl=en&u=http%3A%2F%2F6-lab.com%2Fen%2Flogic-u-adapters.html Various adapters] are available, for example RS422/RS232/CAN, galvanic isolation, "BNC divider". 
6 There is apparently [http://we.easyelectronics.ru/Turtleblast/poluchil-xzl-studio-ax.html#comment53143 a post from the author of XZL-Studio DX] in some forum. 
7 There's [http://lab.robomotic.com/shop?page=shop.product_details&flypage=flypage.tpl&product_id=27&category_id=6 an RS232/RS485/RS422/CAN converter board] for this. 


== Download ==

Released versions of the source code can be downloaded here:

http://sigrok.org/download/source/sigrok-firmware-fx2lafw/

There are also '''pre-built firmware files''' that can be used without having to build them from source:

http://sigrok.org/download/binary/sigrok-firmware-fx2lafw/

Or you can get the latest development snapshot of the source code from git:

$ '''git clone git://sigrok.org/sigrok-firmware-fx2lafw'''

You can also [http://sigrok.org/gitweb/?p=sigrok-firmware-fx2lafw.git;a=tree browse the source code] via gitweb.

== Usage ==

=== Build sigrok ===

* Build and install a [[libsigrok]] frontend (CLI or GUI) with libsigrok >= 0.1.1 (or latest git HEAD) for your platform as usual, see [[Building]].

=== Install the udev rules file ===

These steps prevent the need to run libsigrok frontends as superuser.

* Copy the udev rules file from '''libsigrok/contrib/z60_libsigrok.rules''' to '''/etc/udev/rules.d/''' (or where-ever your distribution stores udev rules files).
* Restart udev: '''sudo /etc/init.d/udev restart'''.

=== Build fx2lafw ===

$ '''cd sigrok-firmware-fx2lafw'''
$ '''./autogen.sh'''
$ '''./configure'''
$ '''make'''
$ '''sudo make install'''

This will install the firmware files into '''/usr/local/share/sigrok-firmware/''', per default.

=== Pre-built firmware files ===

There are also pre-built firmware files that can be used without having to build them from source (see [[#Download|above]]).

== Cypress FX2 vs. FX2LP ==

Various devices supported by fx2lafw can use either the older Cypress CY7C68013 (FX2) or the more recent Cypress CY7C68013A (FX2LP).

There are [http://www.cypress.com/?id=4&rID=31723 various differences] between the two ICs, see [http://www.cypress.com/?rID=12968 AN4078 - Migrating From EZ-USB FX2 to EZ-USB FX2LP] ([http://www.cypress.com/?docID=39449 PDF]) for the details.

There are known cases of e.g. the [[CWAV USBee SX]] having shipped with an FX2 at some point, and more recent units shipping with an FX2LP. Also, it's not too uncommon that some FX2 "eval board" or clone of an existing logic analyser (e.g. [[CWAV USBee SX]] or [[Saleae Logic]] ones) has "CY7C68013A (FX2LP)" chip markings, but in reality it really is an older "CY7C68013 (FX2)".

The fx2lafw firmware supports both devices (FX2 and FX2LP).

== Resources ==

* [http://sdcc.sourceforge.net/ sdcc] (C compiler for 8051 microcontrollers, usable for FX2)
* fx2lib: [http://sourceforge.net/projects/fx2lib/ SF project page], [http://allmybrain.com/2008/12/05/an-open-source-library-for-writing-firmware-on-the-cypress-fx2-with-sdcc/ blog article], [https://github.com/mulicheng/fx2lib github repo], [http://sourceforge.net/mailarchive/forum.php?forum_name=fx2lib-devel mailing list]
* [http://www.cypress.com/?id=193 Cypress FX2] docs:
** [http://www.cypress.com/?rID=38801 CY7C68013A, CY7C68014A, CY7C68015A, CY7C68016A datasheet] ([http://www.cypress.com/?docID=34060 PDF])
** [http://www.cypress.com/?rID=38232 EZ-USB Technical Reference Manual (TRM)] ([http://www.cypress.com/?docID=27095&dlm=1 PDF])
** [http://www.cypress.com/?id=193&rtID=76 EZ-USB FX2LP appnotes]
** [http://www.cypress.com/?id=193&rtID=111 EZ-USB FX2LP errata]
** [http://www.cypress.com/?rID=14448 GPIF Designer] (Windows software, requires login)
*** [http://www.cypress.com/?rID=14319 CY3681 EZ-USB FX2 Development Kit] (GPIF designer downloadable without login)
** [http://www.cypress.com/?rID=12968 AN4078 - Migrating From EZ-USB FX2 to EZ-USB FX2LP] ([http://www.cypress.com/?docID=39449 PDF])

Saleae Logic8

2015-12-02T21:20:34Z

Adicarlo: device / logic analyzer category

{{Infobox logic analyzer
| image = [[File:Saleae_Logic8_case_bottom.jpg|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Hardware ==

These are provisional guesses, please correct if you spot errors, they are surely there.

* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html XILINIX Spartan-6] XC6SLX9 CSG225BIV1425 [http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf Spartan-6 Family Overview]
* '''USB interface chip''': [http://www.cypress.com/?mpn=CY7C68013A-56LTXC Cypress CY7C66013A-56LTXC] [http://www.cypress.com/?docID=45142 datasheet]
* [http://www.ti.com/product/sn74lvc245a?qgpn=sn74lvc245a TI SN74LVC245A] 5.5V tolerant octal bus transceiver
* '''acquisition signal processing''': 6x [http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF Analog Devices ADA4891-4] quad amplifier
* '''ADC''': [https://www.hittite.com/products/view.html/view/HMCAD1100 Hittite Microwave HMCAD1100] ([https://www.hittite.com/content/documents/data_sheet/hmcad1100.pdf datasheet])
* '''unknown function''': MNAB / F26A
* this list not yet complete (EPROM? Voltage regulation?)

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

== lsusb output ==

<pre>
Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
</pre>

[[Category:Device]]
[[Category:Logic analyzer]]

Saleae Logic8

2015-12-02T21:19:14Z

Adicarlo: protect lsusb output

Saleae Logic8

2014-12-21T22:05:11Z

Adicarlo: /* Hardware */ note my flaws

{{Infobox logic analyzer
| image = [[File:Saleae_Logic8_case_bottom.jpg|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Hardware ==

These are provisional guesses, please correct if you spot errors, they are surely there.

* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html XILINIX Spartan-6] XC6SLX9 CSG225BIV1425 [http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf Spartan-6 Family Overview]
* '''USB interface chip''': [http://www.cypress.com/?mpn=CY7C68013A-56LTXC Cypress CY7C66013A-56LTXC] [http://www.cypress.com/?docID=45142 datasheet]
* [http://www.ti.com/product/sn74lvc245a?qgpn=sn74lvc245a TI SN74LVC245A] 5.5V tolerant octal bus transceiver
* '''acquisition signal processing''': 6x [http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF Analog Devices ADA4891-4] quad amplifier
* '''ADC''': [https://www.hittite.com/products/view.html/view/HMCAD1100 Hittite Microwave HMCAD1100] ([https://www.hittite.com/content/documents/data_sheet/hmcad1100.pdf datasheet])
* '''unknown function''': MNAB / F26A
* this list not yet complete (EPROM? Voltage regulation?)

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-21T21:54:55Z

Adicarlo: /* Hardware */ cribbed from logic pro 16, which has two of these

{{Infobox logic analyzer
| image = [[File:Saleae_Logic8_case_bottom.jpg|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Hardware ==

These are provisional guesses, please correct if you spot errors, they are surely there.

* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html XILINIX Spartan-6] XC6SLX9 CSG225BIV1425 [http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf Spartan-6 Family Overview]
* '''USB interface chip''': [http://www.cypress.com/?mpn=CY7C68013A-56LTXC Cypress CY7C66013A-56LTXC] [http://www.cypress.com/?docID=45142 datasheet]
* [http://www.ti.com/product/sn74lvc245a?qgpn=sn74lvc245a TI SN74LVC245A] 5.5V tolerant octal bus transceiver
* '''acquisition signal processing''': 6x [http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF Analog Devices ADA4891-4] quad amplifier
* '''ADC''': [https://www.hittite.com/products/view.html/view/HMCAD1100 Hittite Microwave HMCAD1100] ([https://www.hittite.com/content/documents/data_sheet/hmcad1100.pdf datasheet])
* '''unknown function''': MNAB / F26A

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-21T16:55:01Z

Adicarlo: /* Hardware */

{{Infobox logic analyzer
| image = [[File:Saleae_Logic8_case_bottom.jpg|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Hardware ==

These are provisional guesses, please correct if you spot errors, they are surely there.

* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html XILINIX Spartan-6] XC6SLX9 CSG225BIV1425 [http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf Spartan-6 Family Overview]
* '''USB interface chip''': [http://www.cypress.com/?mpn=CY7C68013A-56LTXC Cypress CY7C66013A-56LTXC] [http://www.cypress.com/?docID=45142 datasheet]
* [http://www.ti.com/product/sn74lvc245a?qgpn=sn74lvc245a TI SN74LVC245A] 5.5V tolerant octal bus transceiver
* '''acquisition signal processing''': 6x [http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF Analog Devices ADA4891-4] quad amplifier
* '''unknown function''': HAD1100 / UVA8
* '''unknown function''': MNAB / F26A

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-21T16:53:04Z

Adicarlo: /* Hardware */

{{Infobox logic analyzer
| image = [[File:Saleae_Logic8_case_bottom.jpg|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Hardware ==

These are provisional guesses, please correct if you spot errors, they are surely there.

* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html XILINIX Spartan-6] XC6SLX9 CSG225BIV1425 [http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf Spartan-6 Family Overview]
* '''USB interface chip''': [http://www.cypress.com/?mpn=CY7C68013A-56LTXC Cypress CY7C66013A-56LTXC] [http://www.cypress.com/?docID=45142 datasheet]
* [http://www.ti.com/product/sn74lvc245a?qgpn=sn74lvc245a TI SN74LVC245A] 5.5V tolerant octal bus transceiver
* '''acquisition signal processing''': 6x [http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF Analog Devices ADA4891-4] quad amplifier
* '''unknown function''': HAD1100 / UVA8

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-21T04:28:09Z

Adicarlo: fix infobox image

{{Infobox logic analyzer
| image = [[File:Saleae_Logic8_case_bottom.jpg|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Hardware ==

These are provisional guesses, please correct if you spot errors, they are surely there.

* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html XILINIX Spartan-6] XC6SLX9 CSG225BIV1425 [http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf Spartan-6 Family Overview]
* '''USB interface chip''': [http://www.cypress.com/?mpn=CY7C68013A-56LTXC Cypress CY7C66013A-56LTXC] [http://www.cypress.com/?docID=45142 datasheet]
* '''unknown function''': [http://www.ti.com/product/sn74lvc245a?qgpn=sn74lvc245a TI SN74LVC245A] octal bus transciever
* '''acquisition?''': 6 chips labelled 4891-4 / ARUZ / #1425
* '''unknown function''': HAD1100 / UVA8

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-21T00:13:34Z

Adicarlo: /* Hardware */

{{Infobox logic analyzer
| image = [[File:Saleae Logic16 bottom.png|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Hardware ==

These are provisional guesses, please correct if you spot errors, they are surely there.

* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html XILINIX Spartan-6] XC6SLX9 CSG225BIV1425 [http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf Spartan-6 Family Overview]
* '''USB interface chip''': [http://www.cypress.com/?mpn=CY7C68013A-56LTXC Cypress CY7C66013A-56LTXC] [http://www.cypress.com/?docID=45142 datasheet]
* '''unknown function''': [http://www.ti.com/product/sn74lvc245a?qgpn=sn74lvc245a TI SN74LVC245A] octal bus transciever
* '''acquisition?''': 6 chips labelled 4891-4 / ARUZ / #1425
* '''unknown function''': HAD1100 / UVA8

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-21T00:12:32Z

Adicarlo: /* Hardware */

{{Infobox logic analyzer
| image = [[File:Saleae Logic16 bottom.png|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Hardware ==

These are provisional guesses, please correct if you spot errors, they are surely there.

* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html XILINIX Spartan-6] XC6SLX9 CSG225BIV1425 [http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf Spartan-6 Family Overview]
* '''USB interface chip''': [http://www.cypress.com/?mpn=CY7C68013A-56LTXC Cypress CY7C66013A-56LTXC] [http://www.cypress.com/?docID=45142 datasheet]
* [http://www.ti.com/product/sn74lvc245a?qgpn=sn74lvc245a TI SN74LVC245A] octal bus transciever, not sure the function...
* '''acquisition?''': 6 chips labelled 4891-4 / ARUZ / #1425
* '''unknown function''': HAD1100 / UVA8

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-21T00:03:48Z

Adicarlo: working on chip breakdown

{{Infobox logic analyzer
| image = [[File:Saleae Logic16 bottom.png|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Hardware ==

These are provisional guesses, please correct if you spot errors, they are surely there.

* '''FPGA''': [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html XILINIX Spartan-6] XC6SLX9 CSG225BIV1425 [http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf Spartan-6 Family Overview]
* '''USB interface chip''': [http://www.cypress.com/?mpn=CY7C68013A-56LTXC Cypress CY7C66013A-56LTXC] [http://www.cypress.com/?docID=45142 datasheet]
* ...

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-20T23:49:39Z

Adicarlo: /* integrated circuits */

{{Infobox logic analyzer
| image = [[File:Saleae Logic16 bottom.png|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

=== integrated circuits ===

These are provisional guesses, please correct if you spot errors, they are surely there.

* XILINIX [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html Spartan 6 FPGA] XC6SLX9
* CY7C66013A -- USB interface

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-20T23:48:20Z

Adicarlo:

{{Infobox logic analyzer
| image = [[File:Saleae Logic16 bottom.png|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

This page is to help provide hardware details in the interest of getting this device supported.

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

=== integrated circuits ===

These are provisional guesses, please correct if you spot errors, they are surely there.

* XILINIX [http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html Spartan 6 FPGA] XC6SLX9
* CY7C66013A

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-20T23:44:22Z

Adicarlo:

{{Infobox logic analyzer
| image = [[File:Saleae Logic16 bottom.png|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

== Teardown Images ==

<gallery>
Saleae_Logic8_case_top.jpg|case top
Saleae_Logic8_case_bottom.jpg|case bottom
Saleae_Logic8_case_rear.jpg|rear of case, 8 acquisitions and 8 grounds
Saleae_Logic8_board_top.jpg|primary and only board, top
Saleae_Logic8_board_top_upper.jpg|upper detail of primary board
Saleae_Logic8_board_bottom.jpg|bottom of primary board
[[File:Saleae_Logic8_board_bottom_upper_right.jpg|upper right detail of primary board
</gallery>

[http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html Spartan 6 FPGA]

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-20T23:38:25Z

Adicarlo: /* lsusb output */

{{Infobox logic analyzer
| image = [[File:Saleae Logic16 bottom.png|180px]]
| name = Saleae Logic8
| status = unsupported
| source_code_dir = N/A
| channels = 8
| samplerate = 100/50/40/25
| samplerate_state = —
| triggers = none (SW-only)
| voltages = 1.8V — 5.5V
| threshold =
| memory =
| compression = yes
| website = [http://www.saleae.com/ saleae.com]
}}

The '''Saleae Logic8''' is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a '''Torx T7''' screwdriver to open.

== Teardown Images ==

=== case ===
[[File:Saleae_Logic8_case_top.jpg]]
[[File:Saleae_Logic8_case_bottom.jpg]]
[[File:Saleae_Logic8_case_rear.jpg]]

=== upper side of board ===
[[File:Saleae_Logic8_board_top.jpg]]
[[File:Saleae_Logic8_board_top_upper.jpg]]

=== bottom side of board ===
[[File:Saleae_Logic8_board_bottom.jpg]]
[[File:Saleae_Logic8_board_bottom_upper_right.jpg]]

[http://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html Spartan 6 FPGA]

== lsusb output ==

Bus 001 Device 007: ID 21a9:1004
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1004
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 171
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 2
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 3
bNumEndpoints 6
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic8

2014-12-20T23:00:48Z

Adicarlo: Created page with "{{Infobox logic analyzer | image = 180px | name = Saleae Logic8 | status = unsupported | source_code_dir =..."

File:Saleae Logic8 board bottom upper right.jpg

2014-12-20T22:45:13Z

Adicarlo:

== Licensing ==
{{PD}}

File:Saleae Logic8 board bottom.jpg

2014-12-20T22:44:36Z

Adicarlo:

== Licensing ==
{{PD}}

File:Saleae Logic8 board top upper.jpg

2014-12-20T22:43:48Z

Adicarlo:

== Licensing ==
{{PD}}

File:Saleae Logic8 board top.jpg

2014-12-20T22:43:09Z

Adicarlo:

== Licensing ==
{{PD}}

File:Saleae Logic8 case rear.jpg

2014-12-20T22:42:12Z

Adicarlo:

== Licensing ==
{{PD}}

File:Saleae Logic8 case bottom.jpg

2014-12-20T22:41:41Z

Adicarlo:

== Licensing ==
{{PD}}

File:Saleae Logic8 case top.jpg

2014-12-20T22:40:17Z

Adicarlo:

== Licensing ==
{{PD}}