X-Git-Url: https://sigrok.org/gitweb/?p=sigrok-util.git;a=blobdiff_plain;f=cross-compile%2Fmingw%2Fsigrok-cross-mingw;h=5920595017fd2c5bacaf2a32ebee93872c52f488;hp=b35a0040b5ae3511a8856aa48efbe3edb0bcc5d8;hb=3dcba30db405095905631b232270ade74a568e94;hpb=d0793c360966c4d6ebabd7a40674f9882956a75f

diff --git a/cross-compile/mingw/sigrok-cross-mingw b/cross-compile/mingw/sigrok-cross-mingw
index b35a004..5920595 100755
--- a/cross-compile/mingw/sigrok-cross-mingw
+++ b/cross-compile/mingw/sigrok-cross-mingw
@@ -1,8 +1,8 @@
-#!/bin/bash
+#!/bin/sh
 ##
 ## This file is part of the sigrok-util project.
 ##
-## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2013-2014 Uwe Hermann <uwe@hermann-uwe.de>
 ##
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -21,6 +21,9 @@
 
 set -e
 
+# Build target: "i686" (32bit) or "x86_64" (64bit).
+TARGET="i686"
+
 # The path where your MXE directory is located.
 MXE=$HOME/mxe-git
 
@@ -28,7 +31,13 @@ MXE=$HOME/mxe-git
 PREFIX=$HOME/sr_mingw
 
 # The path where to download files to and where to build packages.
-BUILDDIR=./sr_mingw_build
+BUILDDIR=./build
+
+# Edit this to control verbose build output.
+# V="V=1 VERBOSE=1"
+
+# Edit this to enable/disable/modify parallel compiles.
+PARALLEL="-j 2"
 
 # You usually don't need to change anything below this line.
 
@@ -36,19 +45,28 @@ BUILDDIR=./sr_mingw_build
 
 SF_MIRROR=switch.dl.sourceforge.net
 
-VER_LIBUSBX=1.0.17
+WGET="wget -c --quiet"
+GIT_CLONE="git clone --depth=1"
 
 # -----------------------------------------------------------------------------
 
-# We need to find tools in the toolchain and in the install directory.
-export PATH=$PREFIX/bin:$MXE/usr/bin:$PATH
+# We need to find tools in the toolchain.
+export PATH=$MXE/usr/bin:$PATH
+
+TOOLCHAIN_TRIPLET="$TARGET-w64-mingw32.static"
 
 P="$PREFIX/lib/pkgconfig"
-P2="$MXE/usr/i686-pc-mingw32/lib/pkgconfig"
-C="--host=i686-pc-mingw32 --prefix=$PREFIX"
-CM="-DCMAKE_TOOLCHAIN_FILE=$MXE/usr/i686-pc-mingw32/share/cmake/mxe-conf.cmake"
+P2="$MXE/usr/$TOOLCHAIN_TRIPLET/lib/pkgconfig"
+C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"
+CM="-DCMAKE_TOOLCHAIN_FILE=$MXE/usr/$TOOLCHAIN_TRIPLET/share/cmake/mxe-conf.cmake"
 L="--disable-shared --enable-static"
 
+if [ $TARGET = "i686" ]; then
+	export PKG_CONFIG_PATH_i686_w64_mingw32_static="$P:$P2"
+else
+	export PKG_CONFIG_PATH_x86_64_w64_mingw32_static="$P:$P2"
+fi
+
 # Remove build directory contents (if any) and create a new build dir.
 rm -rf $BUILDDIR
 mkdir $BUILDDIR
@@ -56,78 +74,125 @@ cd $BUILDDIR
 
 # -----------------------------------------------------------------------------
 
-# Python3
+mkdir -p $PREFIX
+
 # Cross-compiling Python is highly non-trivial, so we avoid it for now.
 # The download below is a repackaged tarball of the official Python 3.2.3 MSI
-# installer for Windows: http://python.org/ftp/python/3.2.3/python-3.2.3.msi
-# The MSI file has been installed on a Windows box and then the c:\Python32
-# files have been stored in the Python32.tar.gz tarball.
-mkdir -p $PREFIX
-wget http://www.sigrok.org/tmp/Python32.tar.gz -O $PREFIX/Python32.tar.gz
+# installer for Windows:
+#   - https://www.python.org/ftp/python/3.2.3/python-3.2.3.msi
+#   - https://www.python.org/ftp/python/3.2.3/python-3.2.3.amd64.msi
+# The MSI file has been installed on a Windows box and then c:\Python32\libs
+# and c:\Python32\include have been stored in the Python32_*.tar.gz tarball.
+$WGET http://www.sigrok.org/tmp/Python32_$TARGET.tar.gz -O $PREFIX/Python32.tar.gz
 tar xzf $PREFIX/Python32.tar.gz -C $PREFIX
 
-# Create a dummy python3-config that points to Python32 above.
-mkdir -p $PREFIX/bin
-cat >$PREFIX/bin/python3-config <<EOF 
-#!/usr/bin/python3
-import sys
-import getopt
-valid_opts = ['includes', 'cflags', 'libs', 'ldflags']
-opts, args = getopt.getopt(sys.argv[1:], '', valid_opts)
-opt_flags = [flag for (flag, val) in opts]
-for opt in opt_flags: 
-    if opt in ('--includes', '--cflags'):
-        print('-I$PREFIX/Python32/include')
-    elif opt in ('--libs', '--ldflags'):
-        print('-L$PREFIX/Python32/libs -lpython32')
+# Create a dummy python3.pc file so that pkg-config finds Python 3.
+mkdir -p $PREFIX/lib/pkgconfig
+cat >$PREFIX/lib/pkgconfig/python3.pc <<EOF 
+prefix=$PREFIX
+exec_prefix=\${prefix}
+libdir=\${exec_prefix}/lib
+includedir=\${prefix}/include
+Name: Python
+Description: Python library
+Version: 3.2
+Libs: -L$PREFIX/Python32/libs -lpython32
+Cflags: -I$PREFIX/Python32/include
 EOF
-chmod 755 $PREFIX/bin/python3-config
-
-# Download the Python 3.2.3 MSI installer (needed for NSIS runs).
-wget -c http://python.org/ftp/python/3.2.3/python-3.2.3.msi \
-     -O $PREFIX/python-3.2.3.msi
 
-# libusbx
-wget http://$SF_MIRROR/project/libusbx/releases/$VER_LIBUSBX/source/libusbx-$VER_LIBUSBX.tar.bz2
-tar xfj libusbx-$VER_LIBUSBX.tar.bz2
-cd libusbx-$VER_LIBUSBX
-PKG_CONFIG_PATH_i686_pc_mingw32=$P ./configure $C $L && make install
+# The python32.dll and python32.zip files will be shipped in the NSIS
+# Windows installers (required for protocol decoding to work).
+# The file python32.dll (NOT the same as python3.dll) is copied from an
+# installed Python 3.2.3 (see above) from c:\Windows\system32\python32.dll.
+# The file python32.zip contains all files from the 'DLLs', 'Lib', and 'libs'
+# subdirectories from an installed Python on Windows (c:\python32), i.e. some
+# libraries and all Python stdlib modules.
+$WGET http://www.sigrok.org/tmp/python32_$TARGET.dll -O $PREFIX/python32.dll
+$WGET http://www.sigrok.org/tmp/python32_$TARGET.zip -O $PREFIX/python32.zip
+
+# Zadig (we ship this with frontends for easy driver switching).
+$WGET http://zadig.akeo.ie/downloads/zadig.exe -O $PREFIX/zadig.exe
+$WGET http://zadig.akeo.ie/downloads/zadig_xp.exe -O $PREFIX/zadig_xp.exe
+
+# libusb
+$GIT_CLONE git://github.com/dickens/libusb -b event-abstraction-v4
+cd libusb
+./bootstrap.sh
+./configure $C $L
+make -j1 $V
+make install $V
 cd ..
 
 # libserialport
-git clone git://sigrok.org/libserialport
+$GIT_CLONE git://sigrok.org/libserialport
 cd libserialport
 ./autogen.sh
-PKG_CONFIG_PATH_i686_pc_mingw32=$P ./configure $C $L && make install
+./configure $C $L
+make $PARALLEL $V
+make install $V
 cd ..
 
 # libsigrok
-git clone git://sigrok.org/libsigrok
+$GIT_CLONE git://sigrok.org/libsigrok
 cd libsigrok
+patch -p1 < ../../libsigrok_firmwaredir.patch
 ./autogen.sh
-PKG_CONFIG_PATH_i686_pc_mingw32=$P ./configure $C $L && make install
+./configure $C $L
+make $PARALLEL $V
+make install $V
 cd ..
 
 # libsigrokdecode
-git clone git://sigrok.org/libsigrokdecode
+$GIT_CLONE git://sigrok.org/libsigrokdecode
 cd libsigrokdecode
 ./autogen.sh
-PYTHON3_CONFIG=$PREFIX/bin/python3-config PKG_CONFIG_PATH_i686_pc_mingw32=$P ./configure $C $L && make install
+patch -p1 < ../../srd_decodersdir.patch
+./configure $C $L
+make $PARALLEL $V
+make install $V
+cd ..
+
+# sigrok-firmware
+$GIT_CLONE git://sigrok.org/sigrok-firmware
+cd sigrok-firmware
+./autogen.sh
+# Nothing gets cross-compiled here, we just need 'make install' basically.
+./configure --prefix=$PREFIX
+make install $V
+cd ..
+
+# sigrok-firmware-fx2lafw
+$GIT_CLONE git://sigrok.org/sigrok-firmware-fx2lafw
+cd sigrok-firmware-fx2lafw
+./autogen.sh
+# We're building the fx2lafw firmware on the host, no need to cross-compile.
+./configure --prefix=$PREFIX
+make $PARALLEL $V
+make install $V
+cd ..
+
+# sigrok-dumps
+$GIT_CLONE git://sigrok.org/sigrok-dumps
+cd sigrok-dumps
+make install DESTDIR=$PREFIX/share/sigrok-dumps $V
 cd ..
 
 # sigrok-cli
-git clone git://sigrok.org/sigrok-cli
+$GIT_CLONE git://sigrok.org/sigrok-cli
 cd sigrok-cli
 ./autogen.sh
-PKG_CONFIG_PATH_i686_pc_mingw32=$P:$P2 ./configure $C && make install
+./configure $C
+make $PARALLEL $V
+make install $V
 makensis -DHOME=$HOME contrib/sigrok-cli_cross.nsi
 cd ..
 
 # PulseView
-git clone git://sigrok.org/pulseview
+$GIT_CLONE git://sigrok.org/pulseview
 cd pulseview
-patch -p1 < ../../pulseview.patch
-PKG_CONFIG_PATH_i686_pc_mingw32=$P:$P2 cmake $CM -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y . && make install VERBOSE=1
+cmake $CM -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y .
+make $PARALLEL $V
+make install/strip $V
 makensis -DHOME=$HOME contrib/pulseview_cross.nsi
 cd ..