-.TH SIGROK\-FWEXTRACT\-KINGST\-LA2016 1 "Mar 21, 2020"
+.TH SIGROK\-FWEXTRACT\-KINGST\-LA2016 1 "Mar 13, 2021"
.SH "NAME"
-sigrok\-fwextract\-kingst\-la2016 \- Extract Kingst LA2016 firmware
+sigrok\-fwextract\-kingst\-la2016 \- Extract Kingst firmware from vendor software
.SH "SYNOPSIS"
.B sigrok\-fwextract\-kingst\-la2016 [FILE]
.SH "DESCRIPTION"
-This tool extracts FX2 firmware and FPGA bitstreams from the vendor
-software for the Kingst LA2016 USB logic analyzer. Download the Linux
-version from[1], and unpack it to find the main binary called "KingstVIS".
+This tool extracts the FX2 MCU firmware and FPGA bitstreams for the Kingst
+LA2016/LA1016 USB logic analyzers from the vendor software. These
+analyzers share the same USB VID:PID and use the same FX2 firmware.
+The correct FPGA bitstream is selected by the libsigrok driver after
+loading the FX2 firmware and reading the device identifier from EEPROM.
.PP
-In order to extract the firmware/bitstreams, run the following command:
+Download the Linux version of the vendor software from [1], and unpack
+it to find the main binary called "KingstVIS". To extract the
+firmware and bitstreams, run the following commands:
.PP
-.B " $ tar -xzf KingstVIS_v3.4.0.tar.gz KingstVIS/KingstVIS"
+.B " $ tar -xzf KingstVIS_v3.5.0_linux.tar.gz KingstVIS"
.PP
.B " $ sigrok-fwextract-kingst-la2016 KingstVIS/KingstVIS"
.br
-.RB " saved 177666 bytes to kingst-la2016a-fpga.bitstream
+.RB " saved 5430 bytes to kingst-la-01a2.fw (crc32=720551a9)"
.br
-.RB " saved 5350 bytes to kingst-la-01a1.fw"
+.RB " saved 178362 bytes to kingst-la2016a1-fpga.bitstream (crc32=7cc894fa)"
.br
-.RB " saved 5430 bytes to kingst-la-01a2.fw"
+.RB " saved 178542 bytes to kingst-la2016-fpga.bitstream (crc32=20694ff1)"
.br
-.RB " saved 5718 bytes to kingst-la-01a3.fw"
+.RB " saved 178379 bytes to kingst-la1016a1-fpga.bitstream (crc32=166866be)"
.br
-.RB " saved 142412 bytes to kingst-la-01a4.fw"
-.br
-.RB " saved 5452 bytes to kingst-la-03a1.fw"
+.RB " saved 178151 bytes to kingst-la1016-fpga.bitstream (crc32=7db70001)"
.PP
-Copy the resulting files over to the location where libsigrok expects
-to find its firmware files. By default this is
+Copy the above firmware and bitstream files to the location where libsigrok
+expects to find firmware files. By default this is
.BR /usr/local/share/sigrok-firmware .
.SH OPTIONS
None.
.SH "EXIT STATUS"
Exits with 0 on success, 1 on most failures.
.SH "SEE ALSO"
-\fBsigrok\-fwextract\-saleae\-logic16\fP(1)
-.br
\fBsigrok\-fwextract\-dreamsourcelab\-dslogic\fP(1)
.br
\fBsigrok\-fwextract\-hantek\-dso\fP(1)
.br
\fBsigrok\-fwextract\-lecroy\-logicstudio\fP(1)
.br
+\fBsigrok\-fwextract\-saleae\-logic16\fP(1)
+.br
\fBsigrok\-fwextract\-sysclk\-lwla1016\fP(1)
.br
\fBsigrok\-fwextract\-sysclk\-lwla1034\fP(1)
.RS 4
.RB http://www.qdkingst.com/download
.br
-\%MD5 of v3.4.0: ca407133cb83b700983d2b704a4255c2
+\%MD5 of v3.5.0: 812bbd37a16d315a489ca33ea2868a36