##
## This file is part of the sigrok-util project.
##
-## Copyright (C) 2013-2014 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2013-2018 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
set -e
# The path where your MXE directory is located.
MXE=$HOME/mxe-git
-# The path where the cross-compiled packages will be installed.
-PREFIX=$HOME/sr_mingw
+# The base path prefix where the cross-compiled packages will be installed.
+PREFIXBASE=$HOME/sr_mingw
-# The path where to download files to and where to build packages.
-BUILDDIR=./build
+# The base path prefix where to download files to and where to build packages.
+BUILDBASE=./build
# Edit this to control verbose build output.
# V="V=1 VERBOSE=1"
# Edit this to enable/disable/modify parallel compiles.
PARALLEL="-j 2"
+# Edit this to enable/disable debug builds.
+DEBUG=0
+
# You usually don't need to change anything below this line.
# -----------------------------------------------------------------------------
-SF_MIRROR=switch.dl.sourceforge.net
-
WGET="wget -c --quiet"
GIT_CLONE="git clone --depth=1"
+REPO_BASE="git://sigrok.org"
+
+# Construct the build and install directory pathnames.
+if [ $TARGET = "i686" ]; then
+ SUFFIX="32"
+else
+ SUFFIX="64"
+fi
+if [ $DEBUG = 1 ]; then
+ # CFLAGS/CXXFLAGS contains "-g" per default for autotools projects.
+ BUILD_TYPE="Debug"
+ PREFIX=$PREFIXBASE"_debug_"$SUFFIX
+ BUILDDIR=$BUILDBASE"_debug_"$SUFFIX
+else
+ BUILD_TYPE="Release"
+ PREFIX=$PREFIXBASE"_release_"$SUFFIX
+ BUILDDIR=$BUILDBASE"_release_"$SUFFIX
+fi
+
# -----------------------------------------------------------------------------
# We need to find tools in the toolchain.
TOOLCHAIN_TRIPLET="$TARGET-w64-mingw32.static.posix"
+CMAKE="$TOOLCHAIN_TRIPLET-cmake"
+
P="$PREFIX/lib/pkgconfig"
P2="$MXE/usr/$TOOLCHAIN_TRIPLET/lib/pkgconfig"
C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX CPPFLAGS=-D__printf__=__gnu_printf__"
-CM="-DCMAKE_TOOLCHAIN_FILE=$MXE/usr/$TOOLCHAIN_TRIPLET/share/cmake/mxe-conf.cmake"
L="--disable-shared --enable-static"
if [ $TARGET = "i686" ]; then
mkdir -p $PREFIX
# Cross-compiling Python is highly non-trivial, so we avoid it for now.
-# The download below is a repackaged tarball of the official Python 3.2.3 MSI
+# The download below is a repackaged tarball of the official Python 3.4.4 MSI
# installer for Windows:
-# - https://www.python.org/ftp/python/3.2.3/python-3.2.3.msi
-# - https://www.python.org/ftp/python/3.2.3/python-3.2.3.amd64.msi
-# The MSI file has been installed on a Windows box and then c:\Python32\libs
-# and c:\Python32\include have been stored in the Python32_*.tar.gz tarball.
-$WGET http://www.sigrok.org/tmp/Python32_$TARGET.tar.gz -O $PREFIX/Python32.tar.gz
-tar xzf $PREFIX/Python32.tar.gz -C $PREFIX
+# - https://www.python.org/ftp/python/3.4.4/python-3.4.4.msi
+# - https://www.python.org/ftp/python/3.4.4/python-3.4.4.amd64.msi
+# The MSI file has been installed on a Windows box and then c:\Python34\libs
+# and c:\Python34\include have been stored in the Python34_*.tar.gz tarball.
+$WGET http://www.sigrok.org/tmp/Python34_$TARGET.tar.gz -O $PREFIX/Python34.tar.gz
+tar xzf $PREFIX/Python34.tar.gz -C $PREFIX
# Create a dummy python3.pc file so that pkg-config finds Python 3.
mkdir -p $PREFIX/lib/pkgconfig
includedir=\${prefix}/include
Name: Python
Description: Python library
-Version: 3.2
-Libs: -L$PREFIX/Python32/libs -lpython32
-Cflags: -I$PREFIX/Python32/include
+Version: 3.4
+Libs: $PREFIX/Python34/libs/libpython34.a
+Cflags: -I$PREFIX/Python34/include
EOF
-# The python32.dll and python32.zip files will be shipped in the NSIS
+# The python34.dll and python34.zip files will be shipped in the NSIS
# Windows installers (required for protocol decoding to work).
-# The file python32.dll (NOT the same as python3.dll) is copied from an
-# installed Python 3.2.3 (see above) from c:\Windows\system32\python32.dll.
-# The file python32.zip contains all files from the 'DLLs', 'Lib', and 'libs'
-# subdirectories from an installed Python on Windows (c:\python32), i.e. some
+# The file python34.dll (NOT the same as python3.dll) is copied from an
+# installed Python 3.4.4 (see above) from c:\Windows\system32\python34.dll.
+# The file python34.zip contains all files from the 'DLLs', 'Lib', and 'libs'
+# subdirectories from an installed Python on Windows (c:\python34), i.e. some
# libraries and all Python stdlib modules.
-$WGET http://www.sigrok.org/tmp/python32_$TARGET.dll -O $PREFIX/python32.dll
-$WGET http://www.sigrok.org/tmp/python32_$TARGET.zip -O $PREFIX/python32.zip
+$WGET http://www.sigrok.org/tmp/python34_$TARGET.dll -O $PREFIX/python34.dll
+$WGET http://www.sigrok.org/tmp/python34_$TARGET.zip -O $PREFIX/python34.zip
+
+# In order to link against Python we need libpython34.a.
+# The upstream Python 32bit installer ships this, the x86_64 installer
+# doesn't. Thus, we generate the file manually here.
+if [ $TARGET = "x86_64" ]; then
+ cp $PREFIX/python34.dll .
+ $MXE/usr/$TARGET-w64-mingw32.static.posix/bin/gendef python34.dll
+ $MXE/usr/bin/$TARGET-w64-mingw32.static.posix-dlltool \
+ --dllname python34.dll --def python34.def \
+ --output-lib libpython34.a
+ mv -f libpython34.a $PREFIX/Python34/libs
+ rm -f python34.dll
+fi
# Zadig (we ship this with frontends for easy driver switching).
$WGET http://zadig.akeo.ie/downloads/zadig.exe -O $PREFIX/zadig.exe
cd ..
# libserialport
-$GIT_CLONE git://sigrok.org/libserialport
+$GIT_CLONE $REPO_BASE/libserialport
cd libserialport
./autogen.sh
./configure $C $L
cd ..
# libsigrok
-$GIT_CLONE git://sigrok.org/libsigrok
+$GIT_CLONE $REPO_BASE/libsigrok
cd libsigrok
./autogen.sh
./configure $C $L
cd ..
# libsigrokdecode
-$GIT_CLONE git://sigrok.org/libsigrokdecode
+$GIT_CLONE $REPO_BASE/libsigrokdecode
cd libsigrokdecode
./autogen.sh
./configure $C $L
cd ..
# sigrok-firmware
-$GIT_CLONE git://sigrok.org/sigrok-firmware
+$GIT_CLONE $REPO_BASE/sigrok-firmware
cd sigrok-firmware
./autogen.sh
# Nothing gets cross-compiled here, we just need 'make install' basically.
cd ..
# sigrok-firmware-fx2lafw
-$GIT_CLONE git://sigrok.org/sigrok-firmware-fx2lafw
+$GIT_CLONE $REPO_BASE/sigrok-firmware-fx2lafw
cd sigrok-firmware-fx2lafw
./autogen.sh
# We're building the fx2lafw firmware on the host, no need to cross-compile.
cd ..
# sigrok-dumps
-$GIT_CLONE git://sigrok.org/sigrok-dumps
+$GIT_CLONE $REPO_BASE/sigrok-dumps
cd sigrok-dumps
make install DESTDIR=$PREFIX/share/sigrok-dumps $V
cd ..
# sigrok-cli
-$GIT_CLONE git://sigrok.org/sigrok-cli
+$GIT_CLONE $REPO_BASE/sigrok-cli
cd sigrok-cli
./autogen.sh
./configure $C
make $PARALLEL $V
make install $V
-makensis -DHOME=$HOME contrib/sigrok-cli_cross.nsi
+makensis contrib/sigrok-cli_cross.nsi
cd ..
# PulseView
-$GIT_CLONE git://sigrok.org/pulseview
+$GIT_CLONE $REPO_BASE/pulseview
cd pulseview
-cmake $CM -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX -DDISABLE_WERROR=y -DENABLE_TESTS=y .
+cp ../../FileAssociation.nsh contrib
+$CMAKE \
+ -DCMAKE_INSTALL_PREFIX:PATH=$PREFIX \
+ -DCMAKE_BUILD_TYPE=$BUILD_TYPE \
+ -DDISABLE_WERROR=y \
+ -DENABLE_TESTS=y \
+ .
make $PARALLEL $V
-make install/strip $V
-makensis -DHOME=$HOME contrib/pulseview_cross.nsi
+if [ $DEBUG = 1 ]; then
+ make install $V
+else
+ make install/strip $V
+fi
+makensis contrib/pulseview_cross.nsi
cd ..
projects / sigrok-util.git / blobdiff