##
## This file is part of the sigrok-util project.
##
-## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2013-2015 Uwe Hermann <uwe@hermann-uwe.de>
+## Copyright (C) 2013-2015 Marcus Comstedt <marcus@mc.pp.se>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
##
set -e
+# The path where the NDK, SDK, and toolchains are located.
+ANDROID_PATH=$HOME/android
+
+# The path where the Android NDK is located.
+ANDROID_NDK=$ANDROID_PATH/android-ndk-r10e
+
+# The path where the Android SDK is located.
+ANDROID_SDK=$ANDROID_PATH/android-sdk-linux
+
# The path where your Android toolchain directory is located.
-TOOLCHAIN=$HOME/android/android-arm-toolchain
-# TOOLCHAIN=$HOME/android/android-mipsel-toolchain
-# TOOLCHAIN=$HOME/android/android-i686-toolchain
+# TOOLCHAIN=$ANDROID_PATH/android-arm-toolchain
+# TOOLCHAIN=$ANDROID_PATH/android-mipsel-toolchain
+# TOOLCHAIN=$ANDROID_PATH/android-i686-toolchain
+TOOLCHAIN=$ANDROID_NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86
+# TOOLCHAIN=$ANDROID_NDK/toolchains/x86-4.9/prebuilt/linux-x86
+# TOOLCHAIN=$ANDROID_NDK/toolchains/mipsel-linux-android-4.9/prebuilt/linux-x86
# Select which Android toolchain to use.
# Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET!
PREFIX=$HOME/sr_android
# The path where to download files to and where to build packages.
-BUILDDIR=./sr_android_build
+BUILDDIR=./build
+
+# Edit this to control verbose build output.
+# V="V=1 VERBOSE=1"
# Edit this to enable/disable/modify parallel compiles.
PARALLEL="-j 2"
# -----------------------------------------------------------------------------
VER_LIBICONV=1.14
-VER_GETTEXT=0.18.3
-VER_ZLIB=1.2.8
-VER_PCRE=8.33
-VER_LIBFFI=3.0.13
-VER_GLIB=2.38.2
-VER_GLIB_SHORT=2.38
-VER_LIBZIP=0.11.1
-VER_LIBUSB=0.1.12
-VER_LIBFTDI=0.20
-VER_LIBUSBX=1.0.17
+VER_GETTEXT=0.19.7
+VER_ZLIB=1.2.11
+VER_PCRE=8.38
+VER_LIBFFI=3.2.1
+VER_GLIB=2.48.1
+VER_GLIB_SHORT=2.48
+VER_GLIBMM=2.48.1
+VER_GLIBMM_SHORT=2.48
+VER_LIBSIGCXX=2.9.2
+VER_LIBSIGCXX_SHORT=2.9
+VER_LIBZIP=1.1
+VER_LIBFTDI1=1.2
+VER_LIBUSB=1.0.19
VER_PYTHON=3.3.3
+VER_BOOST=1.58.0
+VER_QT=5.6.0
+VER_QT_SHORT=5.6
+VER_SIGROK_FIRMWARE_FX2LAFW=0.1.3
+VER_NDK=10e
+VER_SDK=24.4.1
+VER_AND_BT=23.0.2 # Android build tools version
+VER_AND_API=16 # Target Android API version
+
+SF_MIRROR=download.sourceforge.net
+
+WGET="wget -c --quiet"
+GIT_CLONE="git clone --depth=1"
+
+REPO_BASE="git://sigrok.org"
-SF_MIRROR=switch.dl.sourceforge.net
+case "$TOOLCHAIN_TRIPLET" in
+ arm*) TARGET_ARCH=armeabi;;
+ mips*) TARGET_ARCH=mips;;
+ i686*) TARGET_ARCH=x86;;
+ *) echo >&2 "Unknown prefix for TOOLCHAIN_TRIPLET."; exit 1;;
+esac
+
+# -----------------------------------------------------------------------------
+
+# Get the Android NDK and SDK, install required packages and toolchains.
+if [ "x$1" = "xprepare" ]; then
+ mkdir -p $ANDROID_PATH
+ cd $ANDROID_PATH
+
+ # NDK
+ $WGET http://dl.google.com/android/ndk/android-ndk-r$VER_NDK-linux-x86.bin
+ chmod 700 android-ndk-r$VER_NDK-linux-x86.bin
+ ./android-ndk-r$VER_NDK-linux-x86.bin -y
+ cd android-ndk-r$VER_NDK
+ ./build/tools/make-standalone-toolchain.sh --platform=android-$VER_AND_API \
+ --toolchain=arm-linux-androideabi-4.9 \
+ --install-dir=$ANDROID_PATH/android-arm-toolchain
+ ./build/tools/make-standalone-toolchain.sh --platform=android-$VER_AND_API \
+ --toolchain=x86-4.9 \
+ --install-dir=$ANDROID_PATH/android-i686-toolchain
+ ./build/tools/make-standalone-toolchain.sh --platform=android-$VER_AND_API \
+ --toolchain=mipsel-linux-android-4.9 \
+ --install-dir=$ANDROID_PATH/android-mipsel-toolchain
+ cd ..
+
+ # SDK
+ $WGET http://dl.google.com/android/android-sdk_r$VER_SDK-linux.tgz
+ tar xfz android-sdk_r$VER_SDK-linux.tgz
+ cd android-sdk-linux
+ echo y | ./tools/android update sdk --no-ui --all --filter platform-tools,build-tools-$VER_AND_BT,android-$VER_AND_API
+ cd ..
+
+ exit
+fi
# -----------------------------------------------------------------------------
mkdir $BUILDDIR
cd $BUILDDIR
+# -----------------------------------------------------------------------------
+
# Build host Python before we start messing with the environment.
-wget http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
-tar xJf Python-$VER_PYTHON.tar.xz
+# Don't do parallel builds, this doesn't seem to work well.
+$WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
+tar xfJ Python-$VER_PYTHON.tar.xz
cd Python-$VER_PYTHON
./configure
-make python $PARALLEL
-make Parser/pgen $PARALLEL
+make python $V
mv python hostpython
-mv Parser/pgen Parser/hostpgen
cd ..
# -----------------------------------------------------------------------------
export PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig"
export -n PKG_CONFIG_PATH
+# Check toolchain
+if test -d "$TOOLCHAIN"/sysroot; then
+ echo "Toolchain is standalone"
+ STANDALONE_TOOLCHAIN=$TOOLCHAIN
+ SYSROOT=
+else
+ STANDALONE_TOOLCHAIN=
+ NATIVE_API_LEVEL=$VER_AND_API
+ SYSROOT_DIR=${ANDROID_NDK}/platforms/android-${NATIVE_API_LEVEL}/arch-${TARGET_ARCH%eabi*}
+ if [ ! -d "$SYSROOT_DIR" ]; then
+ echo >&2 "Can't build with NDK toolchain; sysroot $SYSROOT_DIR is missing"
+ exit 1
+ fi
+ SYSROOT="--sysroot $SYSROOT_DIR"
+ CC="$TOOLCHAIN_TRIPLET-gcc $SYSROOT"
+ CXX="$TOOLCHAIN_TRIPLET-g++ $SYSROOT"
+ export CC CXX
+fi
+NDK_TOOLCHAIN_VERSION=`${TOOLCHAIN_TRIPLET}-gcc --version | head -1 | sed -e 's/.* \([0-9]\+\.[0-9.]\+\)\( \|.*\)$/\1/'`
+
# Define some helper variables.
C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"
+CM="-Wno-dev -DCMAKE_TOOLCHAIN_FILE=../android.toolchain.cmake -DANDROID_ABI=${TARGET_ARCH} -DCMAKE_INSTALL_PREFIX=${PREFIX}"
+if [ -n "$STANDALONE_TOOLCHAIN" ]; then
+ CM="$CM -DANDROID_STANDALONE_TOOLCHAIN=${STANDALONE_TOOLCHAIN}"
+ if [ -d "${ANDROID_NDK}/sources/cxx-stl" ]; then
+ CM="$CM -DANDROID_STL_PATH=${ANDROID_NDK}/sources/cxx-stl"
+ fi
+else
+ CM="$CM -DANDROID_NDK=${ANDROID_NDK}"
+ CM="$CM -DANDROID_NATIVE_API_LEVEL=${NATIVE_API_LEVEL}"
+ CM="$CM -DANDROID_TOOLCHAIN_NAME=${TOOLCHAIN_TRIPLET}-${NDK_TOOLCHAIN_VERSION}"
+fi
+
+# Look for STL, needed to build bindings
+STL_BASE="${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}"
+if [ -d ${STL_BASE}/include ]; then
+ CPPFLAGS_STL="-I${STL_BASE}/include -I${STL_BASE}/libs/${TARGET_ARCH}/include"
+ LDFLAGS_STL="-L${STL_BASE}/libs/${TARGET_ARCH} -Wl,-rpath=${STL_BASE}/libs/${TARGET_ARCH}"
+ BINDINGS_CONFIG="--enable-bindings"
+else
+ echo "Warning: STL unavailable, libsigrok bindings will not be built."
+ CPPFLAGS_STL=
+ LDFLAGS_STL=
+ BINDINGS_CONFIG="--disable-bindings"
+fi
+
+# -----------------------------------------------------------------------------
# Get the latest versions of config.guess/config.sub that know about Android.
-git clone git://git.savannah.gnu.org/config.git
+$GIT_CLONE http://git.savannah.gnu.org/r/config.git
+
+# Get a toolchain for cmake that knows about Android.
+$WGET https://raw.githubusercontent.com/arithran/android-cmake/master/toolchain/android.toolchain.cmake
+patch < ../android.toolchain.cmake.patch android.toolchain.cmake
# -----------------------------------------------------------------------------
# Python (needed for libsigrokdecode)
+# Don't do parallel Python builds, this doesn't seem to work well.
cd Python-$VER_PYTHON
-make distclean
+make distclean $V
autoreconf
patch -p1 < ../../Python-$VER_PYTHON.patch
ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
-make HOSTPYTHON=./hostpython HOSTPGEN=./Parser/hostpgen install $PARALLEL
+sed -i "s/^#zlib/zlib/g" Modules/Setup
+sed -i "s/^#math/math/g" Modules/Setup
+sed -i "s/^#time/time/g" Modules/Setup
+sed -i "s/^#_struct/_struct/g" Modules/Setup
+make PYTHON_FOR_BUILD='_PYTHON_HOST_PLATFORM=$(_PYTHON_HOST_PLATFORM) ./hostpython' install $V
cd ..
# libiconv (needed for glib)
-wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
+$WGET http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
tar xfz libiconv-$VER_LIBICONV.tar.gz
cd libiconv-$VER_LIBICONV
cp -f ../config/config.guess build-aux
cp -f ../config/config.guess libcharset/build-aux
cp -f ../config/config.sub libcharset/build-aux
./configure $C --enable-shared
-make lib/localcharset.h
+make lib/localcharset.h $V
cd libcharset
-make $PARALLEL
-make install
+make $PARALLEL $V
+make install $V
cd ../lib
-make $PARALLEL
-make install
+make $PARALLEL $V
+make install $V
cd ..
test -d $PREFIX/include || mkdir $PREFIX/include
cp include/iconv.h.inst $PREFIX/include/iconv.h
cd ..
# gettext (needed for glib)
-wget http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz
+$WGET http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz
tar xfz gettext-$VER_GETTEXT.tar.gz
cd gettext-$VER_GETTEXT
./configure $C --enable-shared --disable-libasprintf
cd gettext-runtime
-make $PARALLEL
-make install
+make $PARALLEL $V
+make install $V
cd ../..
# zlib (needed for glib and libzip)
-wget http://zlib.net/zlib-$VER_ZLIB.tar.gz
-tar xfvz zlib-$VER_ZLIB.tar.gz
+$WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz
+tar xfz zlib-$VER_ZLIB.tar.gz
cd zlib-$VER_ZLIB
# Note: zlib's configure doesn't understand --host, we need to pass $CC.
-CC=$TOOLCHAIN_TRIPLET-gcc ./configure --prefix=$PREFIX
-make $PARALLEL
-make install
+CC="$TOOLCHAIN_TRIPLET-gcc $SYSROOT" ./configure --prefix=$PREFIX
+make $PARALLEL $V
+make install $V
cd ..
# pcre (needed for glib)
-wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz
-tar xfvz pcre-$VER_PCRE.tar.gz
+$WGET https://ftp.pcre.org/pub/pcre/pcre-$VER_PCRE.tar.gz
+tar xfz pcre-$VER_PCRE.tar.gz
cd pcre-$VER_PCRE
-./configure $C --disable-cpp
-make $PARALLEL
-make install
+./configure $C --disable-cpp --enable-utf --enable-unicode-properties
+make $PARALLEL $V
+make install $V
cd ..
# libffi (needed for glib)
-wget ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz
+$WGET ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz
tar xfz libffi-$VER_LIBFFI.tar.gz
cd libffi-$VER_LIBFFI
./configure $C
-make $PARALLEL
-make install
+make $PARALLEL $V
+make install $V
cd ..
-# glib
-wget http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
-tar xJf glib-$VER_GLIB.tar.xz
+# glib (needed for libsigrok)
+$WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
+tar xfJ glib-$VER_GLIB.tar.xz
cd glib-$VER_GLIB
-./autogen.sh
+NOCONFIGURE=yes ./autogen.sh
# Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config.
LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C
-make $PARALLEL
-make install
+make $PARALLEL $V
+make install $V
cd ..
-# libzip
-wget http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz
+# libzip (needed for libsigrok)
+$WGET http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz
tar xfz libzip-$VER_LIBZIP.tar.gz
cd libzip-$VER_LIBZIP
cp -f ../config/config.guess .
cp -f ../config/config.sub .
./configure $C
-make $PARALLEL
-make install
+make $PARALLEL $V
+make install $V
cd ..
-# libusb-0.1 (not used directly, but needed for libftdi)
-wget http://$SF_MIRROR/project/libusb/libusb-0.1%20%28LEGACY%29/$VER_LIBUSB/libusb-$VER_LIBUSB.tar.gz
-tar xfz libusb-$VER_LIBUSB.tar.gz
+# libusb-1.0 (needed for libsigrok)
+$WGET http://$SF_MIRROR/project/libusb/libusb-1.0/libusb-$VER_LIBUSB/libusb-$VER_LIBUSB.tar.bz2
+tar xfj libusb-$VER_LIBUSB.tar.bz2
cd libusb-$VER_LIBUSB
-cp -f ../config/config.guess .
-cp -f ../config/config.sub .
-./configure $C
-# Explicitly exclude libusbpp.la from lib_LTLIBRARIES, and skip subdirs.
-make lib_LTLIBRARIES=libusb.la SUBDIRS=. $PARALLEL
-make lib_LTLIBRARIES=libusb.la SUBDIRS=. install
-cd ..
-
-# libftdi
-wget http://www.intra2net.com/en/developer/libftdi/download/libftdi-$VER_LIBFTDI.tar.gz
-tar xfz libftdi-$VER_LIBFTDI.tar.gz
-cd libftdi-$VER_LIBFTDI
-cp -f ../config/config.guess .
-cp -f ../config/config.sub .
-# libftdi needs to find libusb-config which is installed in $PREFIX/bin.
-PATH=$PREFIX/bin:$PATH ./configure $C
-make $PARALLEL
-make install
-cd ..
-
-# libusb-1.0
-wget http://$SF_MIRROR/project/libusbx/releases/$VER_LIBUSBX/source/libusbx-$VER_LIBUSBX.tar.bz2
-tar xfj libusbx-$VER_LIBUSBX.tar.bz2
-cd libusbx-$VER_LIBUSBX
patch -p1 < ../../libusb-1.0.patch
./configure $C --disable-udev
-make $PARALLEL
-make install
+make $PARALLEL $V
+make install $V
+cd ..
+
+# libftdi1 (needed for libsigrok)
+$WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi1-$VER_LIBFTDI1.tar.bz2
+tar xfj libftdi1-$VER_LIBFTDI1.tar.bz2
+cd libftdi1-$VER_LIBFTDI1
+cmake $CM -DFTDIPP=no -DDOCUMENTATION=no -DEXAMPLES=no -DFTDI_EEPROM=no -DPYTHON_BINDINGS=no -DBUILD_TESTS=n .
+make $PARALLEL $V
+make install $V
cd ..
# libserialport
-git clone git://sigrok.org/libserialport
+$GIT_CLONE $REPO_BASE/libserialport
cd libserialport
./autogen.sh
-./configure $C --without-libudev
-make $PARALLEL
-make install
-cd ..
+mkdir build
+cd build
+../configure $C
+make $PARALLEL $V
+make install $V
+cd ../..
+
+# Build dependencies for libsigrok bindings if needed
+
+if [ x"$CPPFLAGS_STL" != x ]; then
+
+ # libsigc++ (needed for glibmm)
+ $WGET http://ftp.gnome.org/pub/gnome/sources/libsigc++/$VER_LIBSIGCXX_SHORT/libsigc++-$VER_LIBSIGCXX.tar.xz
+ tar xfJ libsigc++-$VER_LIBSIGCXX.tar.xz
+ cd libsigc++-$VER_LIBSIGCXX
+ cp -f ../config/config.guess build
+ cp -f ../config/config.sub build
+ CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C
+ make $PARALLEL $V
+ make install $V
+ cd ..
+
+ # glibmm (needed for libsigrok bindings)
+ $WGET http://ftp.gnome.org/pub/gnome/sources/glibmm/$VER_GLIBMM_SHORT/glibmm-$VER_GLIBMM.tar.xz
+ tar xfJ glibmm-$VER_GLIBMM.tar.xz
+ cd glibmm-$VER_GLIBMM
+ CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL -lgnustl_shared" ./configure --disable-documentation $C
+ make $PARALLEL $V
+ make install $V
+ cd ..
+
+fi
# libsigrok
-git clone git://sigrok.org/libsigrok
+$GIT_CLONE $REPO_BASE/libsigrok
cd libsigrok
./autogen.sh
-./configure $C
-make $PARALLEL
-make install
-cd ..
+mkdir build
+cd build
+CPPFLAGS="$CPPFLAGS_STL" LDFLAGS="$LDFLAGS_STL" JAVAC="javac -source 1.6 -target 1.6" ../configure $C $BINDINGS_CONFIG --datadir=/sdcard
+make $PARALLEL $V
+make datadir='$(datarootdir)' install $V
+cd ../..
# libsigrokdecode
-git clone git://sigrok.org/libsigrokdecode
+$GIT_CLONE $REPO_BASE/libsigrokdecode
cd libsigrokdecode
./autogen.sh
-./configure $C
-make $PARALLEL
-make install
+mkdir build
+cd build
+../configure $C
+make $PARALLEL $V
+make install $V
+cd ../..
+
+# sigrok-firmware
+$GIT_CLONE $REPO_BASE/sigrok-firmware
+cd sigrok-firmware
+./autogen.sh
+mkdir build
+cd build
+../configure $C
+make $PARALLEL $V
+make install $V
+cd ../..
+
+# sigrok-firmware-fx2lafw
+$WGET http://sigrok.org/download/binary/sigrok-firmware-fx2lafw/sigrok-firmware-fx2lafw-bin-$VER_SIGROK_FIRMWARE_FX2LAFW.tar.gz
+tar xfz sigrok-firmware-fx2lafw-bin-$VER_SIGROK_FIRMWARE_FX2LAFW.tar.gz
+cd sigrok-firmware-fx2lafw-bin-$VER_SIGROK_FIRMWARE_FX2LAFW
+cp *.fw $PREFIX/share/sigrok-firmware/
cd ..
# sigrok-cli
-git clone git://sigrok.org/sigrok-cli
+$GIT_CLONE $REPO_BASE/sigrok-cli
cd sigrok-cli
./autogen.sh
-./configure $C
-make $PARALLEL
-make install
+mkdir build
+cd build
+../configure $C
+make $PARALLEL $V
+make install $V
+cd ../..
+
+# Check if we have all requirements to build PulseView:
+
+if [ -z "$ANDROID_NDK" -o ! -d "$ANDROID_NDK" ]; then
+ echo "Android NDK not available, not building PulseView."
+ exit 0
+fi
+
+if [ -z "$ANDROID_SDK" -o ! -d "$ANDROID_SDK"/platforms/android-$VER_AND_API ]; then
+ echo "Android SDK with platform $VER_AND_API not available, not building PulseView."
+ exit 0
+fi
+
+if [ ! -e "${ANDROID_SDK}/tools/android" ]; then
+ echo "Essential Android build tools not available, not building PulseView."
+ exit 0
+fi
+
+NDK_HOST=`"$ANDROID_NDK/ndk-build" -p 2>/dev/null | awk '$1 == "HOST_TAG" { print $3 }'`
+
+# Boost (needed for PulseView)
+$WGET http://$SF_MIRROR/project/boost/boost/$VER_BOOST/boost_${VER_BOOST//./_}.tar.bz2
+tar xfj boost_${VER_BOOST//./_}.tar.bz2
+cd boost_${VER_BOOST//./_}
+patch -p0 < ../../boost_wchar.patch
+CC= ./bootstrap.sh --with-toolset=gcc --with-libraries=filesystem,system,serialization,test --without-icu
+echo "using gcc : $NDK_TOOLCHAIN_VERSION : \"${TOOLCHAIN_TRIPLET}-g++\" : <cxxflags>\"$SYSROOT -I$PREFIX/include $CPPFLAGS_STL\" <linkflags>\"$SYSROOT -L$PREFIX/lib $LDFLAGS_STL -lgnustl_shared\" ;" > user-config.jam
+./b2 -q -d+2 --ignore-site-config --user-config=user-config.jam toolset=gcc variant=release link=shared threading=multi runtime-link=shared target-os=android --prefix=$PREFIX --layout=system install $PARALLEL
cd ..
+# Qt (needed for PulseView)
+$WGET http://download.qt.io/official_releases/qt/${VER_QT_SHORT}/${VER_QT}/single/qt-everywhere-opensource-src-${VER_QT}.tar.xz
+tar xfi qt-everywhere-opensource-src-${VER_QT}.tar.xz
+cd qt-everywhere-opensource-src-${VER_QT}
+patch -p1 < ../../android-qt.patch
+CC= CXX= ./configure \
+ --prefix="$PREFIX" \
+ -developer-build \
+ -xplatform android-g++ \
+ -nomake tests \
+ -nomake examples \
+ -android-sdk "$ANDROID_SDK" \
+ -android-ndk "$ANDROID_NDK" \
+ -android-ndk-host "$NDK_HOST" \
+ -android-arch "$TARGET_ARCH" \
+ -android-toolchain-version "$NDK_TOOLCHAIN_VERSION" \
+ -skip qtconnectivity \
+ -skip qtdeclarative \
+ -skip qtlocation \
+ -skip qtmultimedia \
+ -skip qtscript \
+ -skip qtsensors \
+ -skip qtserialport \
+ -skip qttools \
+ -skip qttranslations \
+ -skip qtwebchannel \
+ -skip qtwebsockets \
+ -skip qtxmlpatterns \
+ -opensource -confirm-license -silent -no-warnings-are-errors
+export ANDROID_API_VERSION=android-$VER_AND_API
+export ANDROID_BUILD_TOOLS_REVISION=$VER_AND_BT
+make module-qtbase module-qtandroidextras module-qtsvg module-qtimageformats $PARALLEL $V
+make install $V
+cd ..
+
+# sigrok-androidutils
+$GIT_CLONE $REPO_BASE/sigrok-androidutils
+cd sigrok-androidutils
+./autogen.sh
+./configure $C --with-android-sdk="${ANDROID_SDK}" --with-android-platform=android-$VER_AND_API
+make $PARALLEL $V
+make install $V
+cd ..
+
+# Strip all shared libs to reduce size.
+find $PREFIX -iname "*.so" -exec ${TOOLCHAIN_TRIPLET}-strip -S {} \;
+
+# PulseView
+$GIT_CLONE $REPO_BASE/pulseview
+cd pulseview
+patch -p1 < ../../pv_cmake_pkgconfig_fix.patch
+sed -i -e "s,\t\tandroid:versionName=.*$,\t\tandroid:versionName=\"`date -Iseconds`\"," android/AndroidManifest.xml
+cmake $CM -DENABLE_TESTS=y .
+make $PARALLEL $V
+${TOOLCHAIN_TRIPLET}-strip -S libs/$TARGET_ARCH/libpulseview.so
+cd android
+"${ANDROID_SDK}/tools/android" update project -p . -t android-$VER_AND_API -n PulseView
+ant debug
+cd ../..
projects / sigrok-util.git / blobdiff