3 ## This file is part of the sigrok-util project.
5 ## Copyright (C) 2013 Uwe Hermann <uwe@hermann-uwe.de>
7 ## This program is free software; you can redistribute it and/or modify
8 ## it under the terms of the GNU General Public License as published by
9 ## the Free Software Foundation; either version 2 of the License, or
10 ## (at your option) any later version.
12 ## This program is distributed in the hope that it will be useful,
13 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
14 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 ## GNU General Public License for more details.
17 ## You should have received a copy of the GNU General Public License
18 ## along with this program; if not, write to the Free Software
19 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
24 # The path where the Android NDK is located.
25 ANDROID_NDK=$HOME/android/android-ndk-r9d
27 # The path where the Android SDK is located.
28 ANDROID_SDK=$HOME/android/android-sdk-linux
30 # The path where your Android toolchain directory is located.
31 TOOLCHAIN=$HOME/android/android-arm-toolchain
32 # TOOLCHAIN=$HOME/android/android-mipsel-toolchain
33 # TOOLCHAIN=$HOME/android/android-i686-toolchain
35 # Select which Android toolchain to use.
36 # Don't forget to also adapt TOOLCHAIN above if you change TOOLCHAIN_TRIPLET!
37 TOOLCHAIN_TRIPLET=arm-linux-androideabi
38 # TOOLCHAIN_TRIPLET=mipsel-linux-android
39 # TOOLCHAIN_TRIPLET=i686-linux-android
41 # The path where the cross-compiled packages will be installed.
42 PREFIX=$HOME/sr_android
44 # The path where to download files to and where to build packages.
47 # Edit this to enable/disable/modify parallel compiles.
50 # You usually don't need to change anything below this line.
52 # -----------------------------------------------------------------------------
68 SF_MIRROR=switch.dl.sourceforge.net
71 GIT_CLONE="git clone --depth=1"
73 case "$TOOLCHAIN_TRIPLET" in
74 arm*) TARGET_ARCH=armeabi;;
75 mips*) TARGET_ARCH=mips;;
76 i686*) TARGET_ARCH=x86;;
77 *) echo >&2 "Unknown prefix for TOOLCHAIN_TRIPLET."; exit 1;;
80 # -----------------------------------------------------------------------------
82 # Remove build directory contents (if any) and create a new build dir.
87 # -----------------------------------------------------------------------------
89 # Build host Python before we start messing with the environment.
90 # Don't do parallel builds, this doesn't seem to work well.
91 $WGET http://python.org/ftp/python/$VER_PYTHON/Python-$VER_PYTHON.tar.xz
92 tar xJf Python-$VER_PYTHON.tar.xz
99 # -----------------------------------------------------------------------------
101 # We need to find tools in the toolchain.
102 export PATH=$TOOLCHAIN/bin:$PATH
104 # Tell pkg-config to only look for our cross-built stuff.
105 export PKG_CONFIG_LIBDIR="$PREFIX/lib/pkgconfig"
106 export -n PKG_CONFIG_PATH
108 # Define some helper variables.
109 C="--host=$TOOLCHAIN_TRIPLET --prefix=$PREFIX"
110 CM="-Wno-dev -DCMAKE_TOOLCHAIN_FILE=../android.toolchain.cmake -DANDROID_ABI=${TARGET_ARCH} -DCMAKE_INSTALL_PREFIX=${PREFIX} -DANDROID_STANDALONE_TOOLCHAIN=${TOOLCHAIN}"
112 # -----------------------------------------------------------------------------
114 # Get the latest versions of config.guess/config.sub that know about Android.
115 $GIT_CLONE git://git.savannah.gnu.org/config.git
117 # Get a toolchain for cmake that knows about Android.
118 $WGET https://android-cmake.googlecode.com/hg/toolchain/android.toolchain.cmake
119 patch < ../android.toolchain.cmake.patch android.toolchain.cmake
121 # -----------------------------------------------------------------------------
123 # Python (needed for libsigrokdecode)
124 # Don't do parallel Python builds, this doesn't seem to work well.
125 cd Python-$VER_PYTHON
128 patch -p1 < ../../Python-$VER_PYTHON.patch
129 ac_cv_file__dev_ptmx=no ac_cv_file__dev_ptc=no ac_cv_func_pipe2=no ac_cv_func_fdatasync=no ac_cv_func_killpg=no ac_cv_func_waitid=no ac_cv_func_sigaltstack=no ./configure $C --build=x86_64-linux-gnu --disable-ipv6
130 sed -i "s/^#zlib/zlib/g" Modules/Setup
131 make PYTHON_FOR_BUILD=./hostpython install
134 # libiconv (needed for glib)
135 $WGET http://ftp.gnu.org/pub/gnu/libiconv/libiconv-$VER_LIBICONV.tar.gz
136 tar xfz libiconv-$VER_LIBICONV.tar.gz
137 cd libiconv-$VER_LIBICONV
138 cp -f ../config/config.guess build-aux
139 cp -f ../config/config.sub build-aux
140 cp -f ../config/config.guess libcharset/build-aux
141 cp -f ../config/config.sub libcharset/build-aux
142 ./configure $C --enable-shared
143 make lib/localcharset.h
151 test -d $PREFIX/include || mkdir $PREFIX/include
152 cp include/iconv.h.inst $PREFIX/include/iconv.h
155 # gettext (needed for glib)
156 $WGET http://ftp.gnu.org/pub/gnu/gettext/gettext-$VER_GETTEXT.tar.gz
157 tar xfz gettext-$VER_GETTEXT.tar.gz
158 cd gettext-$VER_GETTEXT
159 ./configure $C --enable-shared --disable-libasprintf
165 # zlib (needed for glib and libzip)
166 $WGET http://zlib.net/zlib-$VER_ZLIB.tar.gz
167 tar xfvz zlib-$VER_ZLIB.tar.gz
169 # Note: zlib's configure doesn't understand --host, we need to pass $CC.
170 CC=$TOOLCHAIN_TRIPLET-gcc ./configure --prefix=$PREFIX
175 # pcre (needed for glib)
176 $WGET ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-$VER_PCRE.tar.gz
177 tar xfvz pcre-$VER_PCRE.tar.gz
179 ./configure $C --disable-cpp
184 # libffi (needed for glib)
185 $WGET ftp://sourceware.org/pub/libffi/libffi-$VER_LIBFFI.tar.gz
186 tar xfz libffi-$VER_LIBFFI.tar.gz
187 cd libffi-$VER_LIBFFI
193 # glib (needed for libsigrok)
194 $WGET http://ftp.gnome.org/pub/gnome/sources/glib/$VER_GLIB_SHORT/glib-$VER_GLIB.tar.xz
195 tar xJf glib-$VER_GLIB.tar.xz
198 # Note: Manual LDFLAGS/CPPFLAGS needed for libiconv, rest uses pkg-config.
199 LDFLAGS=-L$PREFIX/lib CPPFLAGS=-I$PREFIX/include glib_cv_stack_grows=no glib_cv_uscore=no ac_cv_func_posix_getpwuid_r=no ac_cv_func_posix_getgrgid_r=no ./configure --disable-compile-warnings $C
204 # libzip (needed for libsigrok)
205 $WGET http://www.nih.at/libzip/libzip-$VER_LIBZIP.tar.gz
206 tar xfz libzip-$VER_LIBZIP.tar.gz
207 cd libzip-$VER_LIBZIP
208 cp -f ../config/config.guess .
209 cp -f ../config/config.sub .
215 # libusb-1.0 (needed for libsigrok)
216 $WGET http://$SF_MIRROR/project/libusbx/releases/$VER_LIBUSBX/source/libusbx-$VER_LIBUSBX.tar.bz2
217 tar xfj libusbx-$VER_LIBUSBX.tar.bz2
218 cd libusbx-$VER_LIBUSBX
219 patch -p1 < ../../libusb-1.0.patch
220 ./configure $C --disable-udev
225 # libftdi1 (needed for libsigrok)
226 $WGET http://www.intra2net.com/en/developer/libftdi/download/libftdi1-$VER_LIBFTDI1.tar.bz2
227 tar xfj libftdi1-$VER_LIBFTDI1.tar.bz2
228 cd libftdi1-$VER_LIBFTDI1
235 $GIT_CLONE git://sigrok.org/libserialport
244 $GIT_CLONE git://sigrok.org/libsigrok
247 ./configure $C --datadir=/sdcard
253 $GIT_CLONE git://sigrok.org/libsigrokdecode
262 $GIT_CLONE git://sigrok.org/sigrok-cli
270 # Check if we have all requirements to build PulseView:
272 if [ -z "$ANDROID_NDK" -o ! -d "$ANDROID_NDK" ]; then
273 echo "Android NDK not available, not building PulseView."
277 if [ -z "$ANDROID_SDK" -o \
278 ! -d "$ANDROID_SDK"/platforms/android-8 -o \
279 ! -d "$ANDROID_SDK"/platforms/android-10 -o \
280 ! -d "$ANDROID_SDK"/platforms/android-11 -o \
281 ! -d "$ANDROID_SDK"/platforms/android-14 -o \
282 ! -d "$ANDROID_SDK"/platforms/android-16 ]; then
283 echo "Android SDK with platforms 8 10 11 14 16 not available, not building PulseView."
287 if [ ! -e "${ANDROID_SDK}/tools/android" ]; then
288 echo "Essential Android build tools not available, not building PulseView."
292 NDK_TOOLCHAIN_VERSION=`${TOOLCHAIN_TRIPLET}-gcc --version | head -1 | sed -e 's/.* \([0-9]\+\.[0-9.]\+\)\( \|.*\)$/\1/'`
293 NDK_HOST=`"$ANDROID_NDK/ndk-build" -p 2>/dev/null | awk '$1 == "HOST_TAG" { print $3 }'`
295 # Boost (needed for PulseView)
296 $WGET http://$SF_MIRROR/project/boost/boost/$VER_BOOST/boost_${VER_BOOST//./_}.tar.bz2
297 tar xfj boost_${VER_BOOST//./_}.tar.bz2
298 cd boost_${VER_BOOST//./_}
299 patch -p1 < ../../boost.patch
300 ./bootstrap.sh --with-toolset=gcc --with-libraries=filesystem,system --without-icu
301 echo "using gcc : $NDK_TOOLCHAIN_VERSION : \"${TOOLCHAIN_TRIPLET}-g++\" : <cxxflags>\"-I$PREFIX/include -I${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/include -I${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/libs/${TARGET_ARCH}/include\" <linkflags>\"-L$PREFIX/lib -L${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/libs/${TARGET_ARCH} -Wl,-rpath=${ANDROID_NDK}/sources/cxx-stl/gnu-libstdc++/${NDK_TOOLCHAIN_VERSION}/libs/${TARGET_ARCH} -lgnustl_shared\" ;" > user-config.jam
302 ./b2 -q -d+2 --user-config=user-config.jam toolset=gcc variant=release link=shared threading=multi runtime-link=shared target-os=android --prefix=$PREFIX --layout=system install $PARALLEL
305 # Qt (needed for PulseView)
306 $WGET http://download.qt-project.org/official_releases/qt/${VER_QT%.*}/${VER_QT}/single/qt-everywhere-opensource-src-${VER_QT}.tar.gz
307 tar xfz qt-everywhere-opensource-src-${VER_QT}.tar.gz
308 cd qt-everywhere-opensource-src-${VER_QT}
309 patch -p1 < ../../android-qt.patch
310 ./configure --prefix="$PREFIX" -developer-build -xplatform android-g++ -nomake tests -nomake examples -android-sdk "$ANDROID_SDK" -android-ndk "$ANDROID_NDK" -android-ndk-host "$NDK_HOST" -android-arch "$TARGET_ARCH" -android-toolchain-version "$NDK_TOOLCHAIN_VERSION" -skip qttranslations -skip qtwebkit -skip qtserialport -skip qtwebkit-examples -skip qtlocation -skip qtconnectivity -opensource -confirm-license
311 make module-qtbase module-qtandroidextras module-qtsvg module-qtimageformats $PARALLEL
315 # sigrok-androidutils
316 $GIT_CLONE git://sigrok.org/sigrok-androidutils
317 cd sigrok-androidutils
319 ./configure $C --with-android-sdk="${ANDROID_SDK}"
325 $GIT_CLONE git://sigrok.org/pulseview
327 cmake $CM -DANDROID_STL_PATH=${ANDROID_NDK}/sources/cxx-stl .
328 make $PARALLEL VERBOSE=1
330 "${ANDROID_SDK}/tools/android" update project -p . -t android-14 -n PulseView