------------------------------------------------------------------------------- PN532 NFC UART output ------------------------------------------------------------------------------- This is a dump of several MiFare Classic cards + tokens. For details see: http://www.adafruit.com/products/364 http://www.adafruit.com/products/365 http://www.adafruit.com/datasheets/pn532ds.pdf http://www.nxp.com/documents/data_sheet/MF1S503x.pdf Logic analyzer setup -------------------- The logic anlyzer used was a Open Logic Sniffer at a sample rate of 1MHz for using a baud rate of 106000 8N1. Each item's UID is within the filename of the dump. Probe UART ---------------- 0 RX 1 TX Data ---- The sigrok command line used was: sigrok-cli --driver=ols:conn=/dev/ttyACM0 --config rle=1:samplerate= \ --samples=1400000 -p '0=RX,1=TX' --triggers 'RX=0' -o .sr The libnfc command line used was: ./examples/nfc-poll /stash/libnfc-sources/libnfc/examples/.libs/lt-nfc-poll uses libnfc libnfc-1.7.0-rc7-42-g8fe13ec NFC reader: pn532_uart:/dev/ttyUSB0 opened NFC device will poll during 30000 ms (20 pollings of 300 ms for 5 modulations) ISO/IEC 14443A (106 kbps) target: ATQA (SENS_RES): 00 04 UID (NFCID1): eb 95 b2 b1 SAK (SEL_RES): 08