-------------------------------------------------------------------------------
SD card / SPI-mode / Commands
-------------------------------------------------------------------------------

This is a set of example captures of individual SD card commands in SPI-mode.


Logic analyzer setup
--------------------

The logic analyzer used was an FX2-based device (at 24MHz):

  Probe       SD card
  -------------------
  0           MOSI
  1           MISO
  2           CLK
  3           CS#


cmd17.sr
--------

This file contains a CMD17 (READ_SINGLE_BLOCK) sequence, reading 512 bytes
from address 0x000f. The first few bytes of the data are "sigrok rocks".