-------------------------------------------------------------------------------
Sensirion SHT2x
-------------------------------------------------------------------------------

This is a set of dumps of a Sensirion SHT2x temperature/humidity sensor.

For details see:
https://www.sensirion.com/en/products/humidity-sensors/humidity-temperature-sensor-sht2x-digital-i2c-accurate/
https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Sensirion_Humidity_Sensors_SHT21_Datasheet_V4.pdf


Logic analyzer setup
--------------------

The logic analyzer used was a USBee SX (at 8 MHz):

  Probe       SHT2x
  -----------------
  1           SDA
  2           SCL


sensirion_sht21_humidity35.sr
-----------------------------

The sensor reports a humidity of ca. 35 %RH.


i2c-sht21-100khz-read-serial-hold.sr
------------------------------------

This file captures reading the version and serial, as well as using
the "temp hold" and "humidity hold" reading styles. Notice SCL held low
by the slave.

Temperature is ~23C and RH ~50% and the serial number is "e4d2 0122 d208 0131".