X-Git-Url: https://sigrok.org/gitweb/?p=sigrok-cli.git;a=blobdiff_plain;f=doc%2Fsigrok-cli.1;h=1666f895b6eff284d6df8a322f9d4c01f9677b5f;hp=32f7030031988a48c8d6e94547afd8589ff48f73;hb=198182cc092b56a005e8990057bffb99794ec797;hpb=f99038b44505c05197da6954d8fcfbbd728c7216

diff --git a/doc/sigrok-cli.1 b/doc/sigrok-cli.1
index 32f7030..1666f89 100644
--- a/doc/sigrok-cli.1
+++ b/doc/sigrok-cli.1
@@ -22,7 +22,10 @@ Show a help text and exit.
 .B "\-V, \-\-version"
 Show
 .B sigrok-cli
-version, and information about supported hardware drivers, input file
+version and the versions of libraries used.
+.TP
+.B "\-L, \-\-list-supported"
+Show information about supported hardware drivers, input file
 formats, output file formats, and protocol decoders.
 .TP
 \fB\-d, \-\-driver\fP <drivername>
@@ -238,48 +241,6 @@ protocol decoder. Additionally, the user tells sigrok to decode the SPI
 protocol using channel 1 as MISO signal for SPI, channel 5 as MOSI, channel 3
 as CLK, and channel 0 as CS# signal.
 .TP
-.BR "\-S, \-\-protocol\-decoder\-stack " <stack>
-This option allows the user to specify a protocol decoder stack, i.e.
-the way in which one protocol decoder's output gets piped into another
-protocol decoder. If not specified, the stack will be set up in the same
-order in which the protocol decoders were given with the
-.B \-\-protocol-decoders
-option.
-.sp
-The decoders are specified by their ID, as shown in the
-.B \-\-version
-output. In addition to the
-.B \-S
-option, all protocol decoders that are used in a stack, must also be specified
-(together with their options, if any) using the
-.B \-P
-parameter.
-.sp
-Example:
-.sp
- $
-.B "sigrok\-cli \-i <file.sr> \-P i2c:sda=4:scl=7,rtc8564"
-.br
-.B "              \-S i2c,rtc8564"
-.sp
-In this example, the
-.B \-S
-option specifies that the output of the
-.BR i2c " decoder"
-is piped into the
-.BR rtc8564 " decoder,"
-i.e., the
-.BR rtc8564 " decoder"
-is stacked on top of the
-.BR i2c " decoder."
-.sp
-The respective protocol decoder options and channel name/number assignments
-must be given using the
-.B \-P
-option (you cannot specify them in the
-.B \-S
-option).
-.TP
 .BR "\-A, \-\-protocol\-decoder\-annotations " <annotations>
 By default, only the stack's topmost protocol decoder's annotation output is
 shown. With this option another decoder's annotation can be selected for
@@ -379,11 +340,13 @@ need a serial port specified:
  $
 .B "sigrok\-cli \-\-driver ols:conn=/dev/ttyACM0 \-\-show
 .sp
-This also works for protocol decoders and output modules:
+This also works for protocol decoders, input modules and output modules:
 .sp
  $
 .B "sigrok\-cli \-\-protocol\-decoders i2c \-\-show
  $
+.B "sigrok\-cli \-\-input\-format csv \-\-show
+ $
 .B "sigrok\-cli \-\-output\-format bits \-\-show
 .TP
 .B "\-\-scan"
@@ -443,6 +406,11 @@ frames, then quit.
 .BR "\-\-continuous"
 Sample continuously until stopped. Not all devices support this.
 .TP
+.BR "\-\-get " <variable>
+Get the value of
+.B <variable>
+from the specified device and print it.
+.TP
 .BR "\-\-set"
 Set one or more variables specified with the \fB\-\-config\fP option, without
 doing any acquisition.