pulseview.git
3 years agoDecodeSignal: Improve robustness
Soeren Apel [Sat, 1 Jul 2017 21:37:55 +0000 (23:37 +0200)]
DecodeSignal: Improve robustness

3 years agoMake sigrok::Context semi-global and use libsigrok A2L methods
Soeren Apel [Sat, 1 Jul 2017 22:48:31 +0000 (00:48 +0200)]
Make sigrok::Context semi-global and use libsigrok A2L methods

3 years agoMake get_raw_samples() use provided mem instead of allocating
Soeren Apel [Sat, 1 Jul 2017 20:24:06 +0000 (22:24 +0200)]
Make get_raw_samples() use provided mem instead of allocating

Until now, Segment::get_raw_samples() was allocating the required
amount of memory and returned it to the caller to use. This way,
there was always enough memory allocated for the data that was
written to that memory location.

However, in SignalBase::conversion_thread_proc() we want to use
one memory location multiple times because we will create several
layers of libsigrok wrapper objects around it. This only works
if Segment::get_raw_samples() uses a given memory location instead
of allocating it by itself.

3 years agoDecodeSignal: Remove global SRD mutex
Soeren Apel [Sat, 1 Jul 2017 21:48:13 +0000 (23:48 +0200)]
DecodeSignal: Remove global SRD mutex

libsigrokdecode commit 514b2edc54efda9c6698456748c4256bb901eddd
makes it thread-safe, so PV can now access it whenever it wants,
not needing to care about concurrent access.

3 years agoFix #831 by saving/restoring PD options
Soeren Apel [Mon, 26 Jun 2017 20:49:28 +0000 (22:49 +0200)]
Fix #831 by saving/restoring PD options

3 years agoFix #888 by incrementing i only once per iteration
Soeren Apel [Fri, 23 Jun 2017 20:14:44 +0000 (22:14 +0200)]
Fix #888 by incrementing i only once per iteration

3 years agoFix #831 by saving/restoring the PD channel mapping
Soeren Apel [Tue, 27 Jun 2017 06:34:29 +0000 (08:34 +0200)]
Fix #831 by saving/restoring the PD channel mapping

3 years agoFix #832 by saving/restoring the decoder stack without settings
Soeren Apel [Tue, 27 Jun 2017 06:33:08 +0000 (08:33 +0200)]
Fix #832 by saving/restoring the decoder stack without settings

3 years agoSession: Break up add_decoder()
Soeren Apel [Tue, 20 Jun 2017 20:38:51 +0000 (22:38 +0200)]
Session: Break up add_decoder()

3 years agoRename "always zoom-to-fit" to "zoom-to-fit during acquisition"
Soeren Apel [Mon, 19 Jun 2017 19:31:23 +0000 (21:31 +0200)]
Rename "always zoom-to-fit" to "zoom-to-fit during acquisition"

3 years agoFix #236 by introducing "zoom-to-fit when acquisition stops" option
Soeren Apel [Wed, 5 Jul 2017 20:28:12 +0000 (22:28 +0200)]
Fix #236 by introducing "zoom-to-fit when acquisition stops" option

3 years agoGlobalSettings: Enable "show sampling points" by default
Soeren Apel [Sun, 18 Jun 2017 18:50:56 +0000 (20:50 +0200)]
GlobalSettings: Enable "show sampling points" by default

3 years agoDecode: Improve signaling
Soeren Apel [Tue, 27 Jun 2017 16:32:30 +0000 (18:32 +0200)]
Decode: Improve signaling

Three issues that were fixed by this:
1) The SignalBase did notify PDs when its conversion changed
and new sample data was generated but this was dismissed as
the samples_cleared() signal was never fired nor used by the
PD stack.

2) The decode_finished() signal was added so that the decode
trace can immediately paint the trace once the PD is done.
Before, a repaint was only triggered when annotations came in,
resulting in a noticeable "unresolved period" visible if the
last stretch of signal didn't contain any annotations as the
trace wasn't repainted quickly enough.

3) The decode trace indirectly looks at the signal's
samples_decoded_ member when drawing the "unresolved period"
bar. Hence we should update this member before triggering the
repaint via new_annotations().

3 years agoFix #981 by adding non-device signals upon view creation
Soeren Apel [Wed, 14 Jun 2017 19:53:58 +0000 (21:53 +0200)]
Fix #981 by adding non-device signals upon view creation

3 years agoDecodeSignal: Don't assume channels always have logic data
Soeren Apel [Wed, 14 Jun 2017 21:37:18 +0000 (23:37 +0200)]
DecodeSignal: Don't assume channels always have logic data

It could be that a signal was assigned to a decoder when it
had a conversion enabled, then the conversion was removed.
This means the signal may no longer provide logic data but
as it's still assigned to the decoder, it will try to access
the logic data and... boom.

3 years agoDecodeSignal: Provide conversion data container sooner
Soeren Apel [Tue, 23 May 2017 16:41:20 +0000 (18:41 +0200)]
DecodeSignal: Provide conversion data container sooner

Before, the converted_data_ container was only created
once we had sample data coming in. This meant that it
wasn't possible to assign a converted signal to a decoder.

With this change, the data container is created even
when there is no data to fill it with, allowing logic_data()
to return a valid result and in turn allowing the user
to assign the signal to a decoder.

3 years agoDecodeSignal: Adjust the DecodeChunkLength
Soeren Apel [Sun, 21 May 2017 22:24:10 +0000 (00:24 +0200)]
DecodeSignal: Adjust the DecodeChunkLength

The initial 4096 was too low, though it did make the UI
quite responsive. In 9cc264 it was increased to 10*1024*1024
to speed up decoding but that makes the UI stall very badly
under certain circumstances (e.g. when changing the baud rate
for UART by entering digits).
The reason is that every time a decoder property is changed,
the decode is restarted. Restarting the decode means that
the currently running processes need to shut down, so
they're told to do so and the GUI thread waits for them
to finish.
However, the srd_session_send() call is blocking, meaning
that libsrd will happily block the PV GUI thread until it's
done processing the current chunk of data.

For this reason, DecodeChunkLength can't be too high and
256*1024 looks like a reasonable compromise for now.

3 years agoDecodeTrace/DecodeSignal: Rework trace drawing interval
Soeren Apel [Tue, 4 Jul 2017 19:23:30 +0000 (21:23 +0200)]
DecodeTrace/DecodeSignal: Rework trace drawing interval

Before, we'd redraw the decode trace every n annotations that
came in. However, that causes a lot of unnecessary redraws
when we're zoomed out relatively far and makes the UI less
responsive in return.

Instead, use a one-shot timer with a fixed delay to redraw
the trace after data has been processed. This way, there is
an upper bound to how often we redraw the trace while at the
same time providing a fixed interval at which we update,
regardless of how many annotations came in, making the
trace fill up continuously.

With that in place, we can also remove annotation_count_
and inc_annotation_count().

3 years agoDecodeSignal: Fix restarting the decode after reloading file
Soeren Apel [Sun, 21 May 2017 17:59:59 +0000 (19:59 +0200)]
DecodeSignal: Fix restarting the decode after reloading file

3 years agoDecodeSignal: Improve auto_assign_signals() matching
Soeren Apel [Tue, 13 Jun 2017 21:28:02 +0000 (23:28 +0200)]
DecodeSignal: Improve auto_assign_signals() matching

Before, signals named "SCL analog" and "SDA analog"
wouldn't be assigned to an I2C decoder.

3 years agoDecodeSignal: Rework samplerate handling
Soeren Apel [Wed, 17 May 2017 06:31:07 +0000 (08:31 +0200)]
DecodeSignal: Rework samplerate handling

Before, running an acquisition, then changing the
samplerate and then running the acquisition again
would result in the wrong (i.e. previous) samplerate
to be used for SRD. This patch fixes this.

3 years agoDecodeSignal: Use signals for new data notification, not session
Soeren Apel [Sun, 7 May 2017 15:51:14 +0000 (17:51 +0200)]
DecodeSignal: Use signals for new data notification, not session

3 years agoDecodeSignal: Change srd session handling
Soeren Apel [Thu, 11 May 2017 07:15:55 +0000 (09:15 +0200)]
DecodeSignal: Change srd session handling

Before, we would hold onto the global srd mutex until all data
was processed and then destroy the srd session, making it
necessary to re-create the srd session (and thus run all data
through the PD again) when new data comes in.

This patch changes this so that we keep the srd session around
when we wait for input data, allowing us to re-use the existing
session when new data comes in. Also, this enables us to
release the global srd mutex when waiting, which wasn't
possible before.

3 years agoImplement logic data muxer thread
Soeren Apel [Wed, 14 Jun 2017 22:10:09 +0000 (00:10 +0200)]
Implement logic data muxer thread

Multiple changes in one commit due to complexity:
1) data::decode::Decoder: Make use of the DecodeChannel struct for
channel assigments

2) DecodeSignal: Store DecodeChannel list in vector, not map

3) DecodeSignal: Remove unused get_data()

4) Remove boost::optional usage

5) Use DecodeSignal::segment_ as the container for muxed
logic data

6) Implement the DecodeSignal::logic_mux_proc thread and its
helper method mux_logic_samples()

7) Update DecodeSignal::decode_proc() to interface with the
logic muxer thread

8) Remove no longer needed DecodeSignal::wait_for_data()

3 years agoSignalBase: Make ConversionBlockSize a class constant
Soeren Apel [Fri, 5 May 2017 20:09:42 +0000 (22:09 +0200)]
SignalBase: Make ConversionBlockSize a class constant

3 years agoMerge DecoderStack into DecodeSignal
Soeren Apel [Wed, 14 Jun 2017 06:30:43 +0000 (08:30 +0200)]
Merge DecoderStack into DecodeSignal

Several changes make up this commit, which unfortunately
can't be separated:

1) Move decoder stack management from DecoderStack to
DecodeSignal, thereby making DecoderStack unnecessary

2) Change the decoder stack from std::list to an
std::vector for direct decoder access

3) Introduce logic_mux_thread which will take care
of muxing the individual SignalBases' logic data into
(cached) logic data that libsigrokdecode expects.
This is necessary as we can no longer do simple bit
mapping within a single logic data segment's logic
data as we now may feed from multiple logic data
segments at once

4) Refactored the creation of decode traces, making
it more streamlined and flexible while simplifying
the class interface

5) Refactored the auto-assignment of channels

6) Refactored is_decode_signal()

7) Reworked decode signal save/restore, allowing
proper handling and with the decoder stack now
being part of the signal, easier save/restore of
the stack and its settings

3 years agoRework decode sample count getters
Soeren Apel [Fri, 14 Apr 2017 11:10:14 +0000 (13:10 +0200)]
Rework decode sample count getters

3 years agoRemove DecodeStack dependency from decode binding wrapper
Soeren Apel [Thu, 13 Apr 2017 16:02:20 +0000 (18:02 +0200)]
Remove DecodeStack dependency from decode binding wrapper

3 years agoMove more functionality into DecodeSignal
Soeren Apel [Wed, 12 Apr 2017 20:06:29 +0000 (22:06 +0200)]
Move more functionality into DecodeSignal

3 years agoRework decode channel auto-assignment
Soeren Apel [Tue, 13 Jun 2017 19:32:04 +0000 (21:32 +0200)]
Rework decode channel auto-assignment

3 years agoRe-use DecodeTrace::ChannelSelector as DecodeChannel
Soeren Apel [Tue, 4 Jul 2017 20:17:22 +0000 (22:17 +0200)]
Re-use DecodeTrace::ChannelSelector as DecodeChannel

3 years agoShift more methods to DecodeSignal
Soeren Apel [Sat, 8 Apr 2017 10:51:13 +0000 (12:51 +0200)]
Shift more methods to DecodeSignal

3 years agoIntroduce DecodeSignal class
Soeren Apel [Fri, 7 Apr 2017 20:18:38 +0000 (22:18 +0200)]
Introduce DecodeSignal class

For starters, we equip it with some basic wrappers
around the decode stack, rework the annotation signal
a little and use the new DecodeSignal in favor of the
SignalBase class.

3 years agoRevert 33d5aa61e77e61f700a8 to re-enable A2L conversion
Soeren Apel [Mon, 12 Jun 2017 05:06:43 +0000 (07:06 +0200)]
Revert 33d5aa61e77e61f700a8 to re-enable A2L conversion

3 years agoINSTALL: Bump requirement to libsigrokcxx >= 0.6.0.
Uwe Hermann [Mon, 26 Jun 2017 20:46:23 +0000 (22:46 +0200)]
INSTALL: Bump requirement to libsigrokcxx >= 0.6.0.

PulseView now uses APIs that are only available in
libsigrokcxx >= 0.6.0.

3 years agoMinor Doxygen comment cosmetics.
Uwe Hermann [Mon, 26 Jun 2017 20:06:23 +0000 (22:06 +0200)]
Minor Doxygen comment cosmetics.

3 years agodoc: Update pulseview(1) manpage, add --driver option (-d)
Gerhard Sittig [Wed, 7 Jun 2017 19:50:41 +0000 (21:50 +0200)]
doc: Update pulseview(1) manpage, add --driver option (-d)

3 years agomain window: Prefer the user specified device in new sessions
Gerhard Sittig [Sun, 25 Jun 2017 18:11:39 +0000 (20:11 +0200)]
main window: Prefer the user specified device in new sessions

Prefer the device that was found with user provided scan options when a
-d command line option was specified. Stick with the previous selection
of "genuine" devices before demo otherwise (when nothing was found, or
when -d was not specified).

3 years agodevice manager: Add support for -d cmdline option (driver scan options)
Gerhard Sittig [Sun, 25 Jun 2017 17:56:33 +0000 (19:56 +0200)]
device manager: Add support for -d cmdline option (driver scan options)

The previous implementation had support to auto-detect devices and to
connect to and pick devices by filling in dialogs, optionally providing
scan options that did not apply to auto-detection. This commit extends
the existing support by introducing a -d command line option similar to
sigrok-cli.

In the absence of the -d command line option, behaviour is identical to
the previous implementation. When -d is provided, the specified driver
is excluded from the auto-detection phase, and another scan is executed
afterwards where the user specified scan options take effect. This shall
result in least interaction and highest reliability of device detection,
while flexibility is increased.

Here are examples of what the -d command line option can do:

  $ pulseview -d ols:conn=/dev/ttyACM0
  $ pulseview -d fx2lafw
  $ pulseview -d demo:logic_channels=32:analog_channels=8

This fixes bug #953.

3 years agodevice manager: Move filter for supported devices to the scan routine
Gerhard Sittig [Sun, 11 Jun 2017 09:10:33 +0000 (11:10 +0200)]
device manager: Move filter for supported devices to the scan routine

Move the check for supported monotonic rate devices from the call site
into the actual scan routine.

The scan routine already used to (store and) return a variable length
set of found devices including none, and call sites can cope with this
situation. Pending extensions may call the scan routine several times,
and callers shall not duplicate the extra test condition. While we
expect the specific test for what's supported to change in the future.

3 years agosession: Add support for input format options (-I cmdline parameter)
Gerhard Sittig [Sun, 25 Jun 2017 17:40:14 +0000 (19:40 +0200)]
session: Add support for input format options (-I cmdline parameter)

The previous implementation supported the selection of an input format
by means of the -I command line option. This commit extends the feature
by adding support for colon separated input format options similar to
sigrok-cli.

This allows users to open files from the command line which previously
became only available after filling in dialogs, and resulted in errors
in the absence of options. Here is an example of how to use the option:

  $ pulseview -I csv:header:first-channel=2 -i filename.csv

This fixes bug #951.

3 years agoutil: Introduce string tokenize helper routine
Gerhard Sittig [Sun, 25 Jun 2017 11:13:01 +0000 (13:13 +0200)]
util: Introduce string tokenize helper routine

Introduce a helper routine which splits a string into tokens that were
separated by a delimiter.

3 years agoFix #982 by correcting the bounding rect for the message
Soeren Apel [Wed, 14 Jun 2017 16:38:13 +0000 (18:38 +0200)]
Fix #982 by correcting the bounding rect for the message

3 years agoCMakeLists.txt: Bump package version to 0.5.0.
Uwe Hermann [Thu, 15 Jun 2017 14:16:58 +0000 (16:16 +0200)]
CMakeLists.txt: Bump package version to 0.5.0.

0.5.0 will be the next major release. Bump now, so that
there is no confusion of tarball 0.4.0 and 0.5.0-git snapshots.

3 years agoHACKING: Prefer git pull requests over mailing list patches.
Uwe Hermann [Tue, 13 Jun 2017 15:05:55 +0000 (17:05 +0200)]
HACKING: Prefer git pull requests over mailing list patches.

Also, drop the reference to gitorious.org (no longer available).

3 years agoHACKING: Update URL to Linux kernel coding style. pulseview-unreleased
Uwe Hermann [Tue, 13 Jun 2017 14:49:11 +0000 (16:49 +0200)]
HACKING: Update URL to Linux kernel coding style.

3 years agoNEWS: Add list of user-visible changes so far.
Uwe Hermann [Sun, 11 Jun 2017 13:33:50 +0000 (15:33 +0200)]
NEWS: Add list of user-visible changes so far.

3 years agoView: Prevent header from being resized when view is resized
Soeren Apel [Mon, 12 Jun 2017 16:21:34 +0000 (18:21 +0200)]
View: Prevent header from being resized when view is resized

3 years agoCMakeLists.txt: Install the PulseView icons.
Uwe Hermann [Sun, 11 Jun 2017 18:38:10 +0000 (20:38 +0200)]
CMakeLists.txt: Install the PulseView icons.

3 years agoCMakeLists.txt: Install the AppData/AppStream file.
Uwe Hermann [Sun, 11 Jun 2017 18:26:57 +0000 (20:26 +0200)]
CMakeLists.txt: Install the AppData/AppStream file.

3 years agoCMakeLists.txt: Install the desktop file.
Uwe Hermann [Sun, 11 Jun 2017 18:25:01 +0000 (20:25 +0200)]
CMakeLists.txt: Install the desktop file.

3 years agoRename sigrok-logo-notext.ico to pulseview.ico.
Uwe Hermann [Sun, 11 Jun 2017 18:08:17 +0000 (20:08 +0200)]
Rename sigrok-logo-notext.ico to pulseview.ico.

3 years agoRename sigrok-logo-notext.svg to pulseview.svg.
Uwe Hermann [Sun, 11 Jun 2017 18:07:15 +0000 (20:07 +0200)]
Rename sigrok-logo-notext.svg to pulseview.svg.

3 years agoRename sigrok-logo-notext.png to pulseview.png.
Uwe Hermann [Sun, 11 Jun 2017 18:05:50 +0000 (20:05 +0200)]
Rename sigrok-logo-notext.png to pulseview.png.

This is more specific and prevents any potential issues e.g. when
multiple distro packages might ship with a generic file like
sigrok-logo-notext.png that's supposed to be installed in the same place.

3 years agocontrib/sigrok_mimeinfo.xml: Drop, moved to libsigrok.
Uwe Hermann [Sun, 11 Jun 2017 17:53:14 +0000 (19:53 +0200)]
contrib/sigrok_mimeinfo.xml: Drop, moved to libsigrok.

3 years agoAdjust trace view namespace
Soeren Apel [Sat, 10 Jun 2017 13:37:45 +0000 (15:37 +0200)]
Adjust trace view namespace

3 years agoMove trace view files
Soeren Apel [Sat, 10 Jun 2017 13:37:28 +0000 (15:37 +0200)]
Move trace view files

3 years agoDeviceManager: Don't perform scans with DMM drivers
Soeren Apel [Fri, 9 Jun 2017 22:57:48 +0000 (00:57 +0200)]
DeviceManager: Don't perform scans with DMM drivers

3 years agoView: Improve 2a9fcd621 by using settings_restored_
Soeren Apel [Fri, 9 Jun 2017 20:44:38 +0000 (22:44 +0200)]
View: Improve 2a9fcd621 by using settings_restored_

The timer is no longer needed as the introduction of
settings_restored_ allows us to determine whether we
should resize the trace label header to its proper
width when the show event is received.
This is because the show event is received only after
all widget resizing took place. This means that the
header pane sizes will be reliable at this point,
making this solution much cleaner than relying on
a timer repeatedly calling expand_header_to_fit().

3 years agoSettings: Add method to set settings defaults
Soeren Apel [Fri, 9 Jun 2017 20:06:02 +0000 (22:06 +0200)]
Settings: Add method to set settings defaults

3 years agoMain(Window): Let the UI and sessions be restored after w.show()
Soeren Apel [Fri, 9 Jun 2017 19:57:21 +0000 (21:57 +0200)]
Main(Window): Let the UI and sessions be restored after w.show()

3 years agoView: Set scroll_needs_defaults_ to true by default
Soeren Apel [Fri, 9 Jun 2017 15:49:58 +0000 (17:49 +0200)]
View: Set scroll_needs_defaults_ to true by default

3 years agoSettings: Refactor out a checkbox creator method
Soeren Apel [Thu, 8 Jun 2017 20:09:02 +0000 (22:09 +0200)]
Settings: Refactor out a checkbox creator method

3 years agoSettings: Only show initial pin config UI elements if enabled
Soeren Apel [Thu, 8 Jun 2017 20:08:19 +0000 (22:08 +0200)]
Settings: Only show initial pin config UI elements if enabled

3 years agoSettings: Add decoder settings page
Soeren Apel [Thu, 8 Jun 2017 14:02:04 +0000 (16:02 +0200)]
Settings: Add decoder settings page

3 years agoDecodeTrace: Change initial pin config description from ? to X
Soeren Apel [Thu, 8 Jun 2017 12:57:54 +0000 (14:57 +0200)]
DecodeTrace: Change initial pin config description from ? to X

3 years agoFix #970 by making sure the session state handler can be called
Soeren Apel [Wed, 7 Jun 2017 16:18:24 +0000 (18:18 +0200)]
Fix #970 by making sure the session state handler can be called

Before, the session did call Session::stop_capture() and fired
the signal to notify of its capture state change. However, the
Session object was deleted before the next run of the Qt event
loop. As the Qt event loop dismisses signals originating from
deleted objects, the connected event handler
MainWindow::on_capture_state_changed() was never called.

To remedy this, we call Session::stop_capture() before the
destruction of the object and force a run of the event loop
immediately afterwards. This way, the event handler is called
and the run/stop button updated properly.

3 years agoFix #775 by catching and handling the thrown exception
Soeren Apel [Tue, 6 Jun 2017 17:46:00 +0000 (19:46 +0200)]
Fix #775 by catching and handling the thrown exception

3 years agoMainWindow: Don't try to close a session when there is none
Soeren Apel [Tue, 6 Jun 2017 17:28:07 +0000 (19:28 +0200)]
MainWindow: Don't try to close a session when there is none

3 years agoView: Introduce settings_restored_
Soeren Apel [Tue, 6 Jun 2017 13:57:27 +0000 (15:57 +0200)]
View: Introduce settings_restored_

This way, UI elements can decide whether they can change UI
settings or whether they are already using user-set values.

3 years agoUpdate man page
Soeren Apel [Tue, 6 Jun 2017 14:16:59 +0000 (16:16 +0200)]
Update man page

3 years agoUpdate cli usage hint and remove unnecessary description text
Soeren Apel [Tue, 6 Jun 2017 14:16:11 +0000 (16:16 +0200)]
Update cli usage hint and remove unnecessary description text

I don't know any cli tool that shows a description text
on the same line as the usage and sigrok-cli doesn't do it
either, so it shouldn't be there.
As I don't see any other place where it would make sense,
I remove it completely.

3 years agoReplace non-ASCII characters
Soeren Apel [Tue, 6 Jun 2017 12:33:54 +0000 (14:33 +0200)]
Replace non-ASCII characters

3 years agoFix #862 by implementing -c / --clean
Soeren Apel [Tue, 6 Jun 2017 14:14:54 +0000 (16:14 +0200)]
Fix #862 by implementing -c / --clean

3 years agoFix #969 by scheduling another call after a small delay
Soeren Apel [Tue, 6 Jun 2017 10:07:25 +0000 (12:07 +0200)]
Fix #969 by scheduling another call after a small delay

3 years agoDrop some trailing whitespace.
Uwe Hermann [Tue, 6 Jun 2017 09:57:35 +0000 (11:57 +0200)]
Drop some trailing whitespace.

3 years agoFix sigrok spelling in two places.
Uwe Hermann [Tue, 6 Jun 2017 08:24:30 +0000 (10:24 +0200)]
Fix sigrok spelling in two places.

3 years agopermit file names not containing dots on import
Sergey Alirzaev [Tue, 6 Jun 2017 01:23:24 +0000 (04:23 +0300)]
permit file names not containing dots on import

3 years agoAllow users to set initial pin states for decoders.
Uwe Hermann [Thu, 11 May 2017 20:58:58 +0000 (22:58 +0200)]
Allow users to set initial pin states for decoders.

This uses the new srd_inst_initial_pins_set_all() libsigrokdecode API
which allows frontends to set the assumed initial pins (i.e., the assumed
state of the pins before the first sample of a capture) to user-specified
values.

The assumed initial pins can be either low, or high, or "use same value
as the first sample of the capture".

3 years agoInstaller: Whitespace consistency fixes.
Uwe Hermann [Mon, 5 Jun 2017 16:10:34 +0000 (18:10 +0200)]
Installer: Whitespace consistency fixes.

3 years agoDevice: Minor whitespace change
Soeren Apel [Mon, 5 Jun 2017 12:10:08 +0000 (14:10 +0200)]
Device: Minor whitespace change

3 years agoDevice: Make capability listing more robust
Soeren Apel [Mon, 5 Jun 2017 12:09:38 +0000 (14:09 +0200)]
Device: Make capability listing more robust

3 years agoInstaller: Rename Examples.lnk
Soeren Apel [Sun, 4 Jun 2017 20:32:18 +0000 (22:32 +0200)]
Installer: Rename Examples.lnk

3 years agoInstaller: Remove examples start menu entry when uninstalling
Soeren Apel [Sun, 4 Jun 2017 20:21:04 +0000 (22:21 +0200)]
Installer: Remove examples start menu entry when uninstalling

3 years agoView: Optimize header pane sizing
Soeren Apel [Sun, 4 Jun 2017 20:11:59 +0000 (22:11 +0200)]
View: Optimize header pane sizing

Before, the header pane didn't resize to accomodate all signals
when a new session was created and a driver selected (e.g. demo).
To fix this, the header pane autosizing was put in a method of
its own and is now called when new signals are added.

Also, the name of header_fully_visible() needed adjustment
because it also returned true when it *wasn't* 100% visible
due to the margin of error that we permit. It's now called
header_was_shrunk() and its return value logic inverted.

3 years agoInstaller: Add "PulseView" to uninstaller/Zadig links.
Uwe Hermann [Sun, 4 Jun 2017 18:52:11 +0000 (20:52 +0200)]
Installer: Add "PulseView" to uninstaller/Zadig links.

Windows 10 merges all links of the same vendor ("sigrok" here) into one
section in the Start menu. If PulseView and sigrok-cli are installed,
there will be two "Uninstall" links and the user will not know which one
uninstalls which program.

3 years agoInstaller: Place set of example .sr files in separate section
Soeren Apel [Sun, 4 Jun 2017 18:40:04 +0000 (20:40 +0200)]
Installer: Place set of example .sr files in separate section

3 years agoInstaller: Update icon cache also after uninstallation
Soeren Apel [Sun, 4 Jun 2017 17:27:26 +0000 (19:27 +0200)]
Installer: Update icon cache also after uninstallation

3 years agoInstaller: Force icon cache refresh
Soeren Apel [Sun, 4 Jun 2017 17:28:26 +0000 (19:28 +0200)]
Installer: Force icon cache refresh

3 years agoFix #964 by adding an option to register the .sr extension with PV
Soeren Apel [Sat, 3 Jun 2017 20:47:10 +0000 (22:47 +0200)]
Fix #964 by adding an option to register the .sr extension with PV

3 years agoDon't use Q_EMIT, it's not needed anymore
Soeren Apel [Sat, 3 Jun 2017 20:44:28 +0000 (22:44 +0200)]
Don't use Q_EMIT, it's not needed anymore

The Q_EMIT macro (just like the regular Qt emit) is syntactic
sugar to let people who read the code know that a method call
placed somewhere is actually a signal.

We don't use Q_EMIT consistently throughout PV and I don't
think it's really needed anyway, so this patch removes the
few remaining instances.

3 years agoView: Limit header pane width
Soeren Apel [Thu, 1 Jun 2017 20:42:20 +0000 (22:42 +0200)]
View: Limit header pane width

3 years agoView: Save/restore splitter state
Soeren Apel [Thu, 1 Jun 2017 19:51:34 +0000 (21:51 +0200)]
View: Save/restore splitter state

3 years agoRemove Header::BaselineOffset and move arrows as needed instead
Soeren Apel [Thu, 1 Jun 2017 19:16:27 +0000 (21:16 +0200)]
Remove Header::BaselineOffset and move arrows as needed instead

The baseline offset was used to keep 5px of distance between
the tip of the arrow and the scroll area. This way, the shadow
that is drawn around the arrow when it's selected won't get
cropped.
However, we can do this differently: instead of always keeping
the empty space around, we make the arrows align at the edge
of the widget space as they should and when they're selected,
we push them aside to the left so the shadow can still be
painted without cropping.

Logically, one would assume that the arrow's label also should
be moving left but I decided against it because this way it
looks as if the arrow didn't actually move, keeping all arrow
labels lined up.

3 years agoFix #957 and #874 by implementing the pane splitter
Soeren Apel [Thu, 1 Jun 2017 20:21:57 +0000 (22:21 +0200)]
Fix #957 and #874 by implementing the pane splitter

3 years agoAdd a MIME info file for sigrok session files.
Uwe Hermann [Thu, 1 Jun 2017 21:32:10 +0000 (23:32 +0200)]
Add a MIME info file for sigrok session files.

File template by Stefan Brüns, thanks!

This fixes bug #857.

3 years agoorg.sigrok.PulseView.appdata.xml: Add CC0-1.0 license comment.
Uwe Hermann [Thu, 1 Jun 2017 21:48:17 +0000 (23:48 +0200)]
org.sigrok.PulseView.appdata.xml: Add CC0-1.0 license comment.

3 years agoorg.sigrok.PulseView.appdata.xml: Drop <project_group> tag.
Uwe Hermann [Thu, 1 Jun 2017 21:29:29 +0000 (23:29 +0200)]
org.sigrok.PulseView.appdata.xml: Drop <project_group> tag.

This currently causes issues with e.g. appstream-util validation:

  $ appstream-util validate-relax org.sigrok.PulseView.appdata.xml
  org.sigrok.PulseView.appdata.xml: FAILED:
  • tag-invalid           : <project_group> is not valid
  Validation of files failed

This is considered an appstream/tool bug, but for now we drop the tag in
order it to avoid issues.

https://github.com/hughsie/appstream-glib/issues/140

3 years agoorg.sigrok.PulseView.appdata.xml: Add <suggests> tags.
Uwe Hermann [Thu, 1 Jun 2017 21:41:00 +0000 (23:41 +0200)]
org.sigrok.PulseView.appdata.xml: Add <suggests> tags.

3 years agoorg.sigrok.PulseView.appdata.xml: Add <mimetype> tag.
Uwe Hermann [Thu, 1 Jun 2017 21:38:56 +0000 (23:38 +0200)]
org.sigrok.PulseView.appdata.xml: Add <mimetype> tag.